Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDD12P-EG2-WB AX PRO Wireless Dual-Tech PIR & Microwave Motion Detector – 12m, 433MHz

Save 18% Save 18%
Original price $132.00
Original price $132.00 - Original price $132.00
Original price $132.00
Current price $108.00
$108.00 - $108.00
Current price $108.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDD12P-EG2-WB AX PRO Wireless Dual-Tech PIR & Microwave Motion Detector – 12m, 433MHz

The Hikvision DS-PDD12P-EG2-WB AX PRO Wireless Dual-Tech Detector is a professional indoor intrusion detector combining passive infrared (PIR) and 24GHz microwave detection technologies for reliable motion detection.

Designed for compatible Hikvision AX PRO wireless alarm systems, this advanced dual-technology detector helps reduce unwanted alarms by using two complementary detection methods to identify movement within the protected area.

Unlike conventional PIR-only motion detectors, the DS-PDD12P-EG2-WB uses both infrared and microwave sensing technologies to improve detection reliability in suitable indoor environments.

The detector provides a maximum 12-metre detection range and an 85.9-degree detection angle, making it suitable for residential rooms, offices, retail premises, showrooms and other commercial security applications.

Its advanced optical design incorporates 52 detection zones to provide comprehensive coverage across the protected area.

The detector supports movement detection speeds ranging from 0.3 to 2 metres per second.

For properties with suitable household pets, the detector offers pet immunity up to 30kg, helping reduce unwanted alarm activations when installed and configured according to Hikvision's recommendations.

Three selectable sensitivity settings are available:

  • Auto: Automatic sensitivity configuration for suitable environments.
  • High: Increased detection sensitivity where required.
  • Pet: Optimised operation for suitable environments with household pets.

The integrated microwave sensor operates at 24GHz (24.15–24.25GHz), providing an additional method of detecting movement within the protected area.

Hikvision's 24GHz microwave design helps limit unwanted detection through walls compared with unsuitable lower-frequency microwave arrangements.

The detector also features 3D optics with creep-zone protection, helping provide detection coverage close to the mounting location.

Advanced digital temperature compensation helps maintain PIR detection performance when environmental temperatures change.

The detector incorporates sealed optics to help protect the internal optical components from contamination.

A 6500 lux white-light filter helps reduce interference caused by strong visible light.

The DS-PDD12P-EG2-WB operates using 433MHz Hikvision Tri-X wireless communication, providing secure two-way connectivity with compatible AX PRO control panels.

Its AES-128 encryption helps protect wireless communication, while frequency hopping technology supports reliable transmission in suitable radio environments.

Hikvision specifies a maximum wireless communication range of 1.2 kilometres in unobstructed free-space conditions.

Actual wireless range depends on building construction, mounting location, radio interference and environmental conditions.

The detector supports remote configuration through compatible Hikvision applications, allowing professional installers to manage supported settings without accessing the detector directly.

For additional security, the DS-PDD12P-EG2-WB incorporates front and rear tamper protection.

Front tamper protection helps identify unauthorised opening of the detector housing, while rear tamper protection helps detect removal from the mounting surface.

The detector also supports environmental temperature indication and wireless signal strength indication through compatible system functions.

Three LED indicator colours provide information about supported detection events:

  • Green LED: PIR detection indication.
  • Red LED: Microwave detection indication.
  • Blue LED: Alarm indication.

The DS-PDD12P-EG2-WB supports multiple enrolment methods, including power-up, Remote ID and QR code enrolment, simplifying installation and commissioning.

Battery-powered operation eliminates the need for conventional alarm signal cabling and provides flexible installation options.

The detector uses two CR123A lithium batteries, with a typical operating voltage of 3V.

Hikvision specifies up to five years of standby battery life under defined operating conditions.

Actual battery life depends on detector activity, wireless communication conditions, environmental temperature and battery quality.

The compact housing measures 65.5 × 103 × 48.5mm and weighs approximately 141g.

The recommended mounting height is 1.8 to 2.4 metres, with wall mounting supported as standard.

Optional compatible wall and ceiling mounting accessories may be available separately.

Designed for protected indoor environments, the detector supports operating temperatures from −10°C to +55°C.

The DS-PDD12P-EG2-WB is suitable for compatible Hikvision AX PRO 433MHz wireless alarm control panels, including supported DS-PWA96-M-WB configurations.

For comprehensive intrusion protection, the detector can be combined with compatible magnetic contacts, glass break detectors, wireless sounders and other AX PRO security devices.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDD12P-EG2-WB is a wireless dual-technology PIR and microwave motion detector. It does not contain a camera, does not provide image verification and is not a standalone alarm system. A compatible Hikvision AX PRO control panel is required.

Hikvision DS-PDD12P-EG2-WB AX PRO Wireless Dual-Tech Detector Australian Warranty

2-Year Australian Warranty – Subject to confirmation of applicable product warranty, warranty terms and Australian Consumer Law.

Key Features

  • Dual-Technology Detection: Combines passive infrared and microwave sensing.
  • 12m Detection Range: Maximum manufacturer-specified motion detection distance.
  • 85.9° Detection Angle: Wide indoor motion detection coverage.
  • 52 Detection Zones: Advanced optical coverage.
  • 24GHz Microwave Sensor: Operates at 24.15–24.25GHz.
  • 30kg Pet Immunity: Helps reduce unwanted alarms from suitable household pets.
  • Three Sensitivity Settings: Auto, High and Pet.
  • 3D Optics: Advanced optical detection design.
  • Creep-Zone Protection: Detection coverage close to the mounting location.
  • Digital Temperature Compensation: Helps maintain detection performance as temperatures change.
  • 6500 Lux White-Light Filter: Helps reduce interference from strong visible light.
  • Sealed Optics: Helps protect internal optical components.
  • Digital Signal Processing: Advanced detection signal analysis.
  • 433MHz Wireless: Compatible Hikvision AX PRO wireless communication.
  • Tri-X Technology: Secure two-way wireless communication.
  • AES-128 Encryption: Helps protect wireless transmissions.
  • Frequency Hopping: Supports reliable wireless communication.
  • 1.2km Wireless Range: Maximum specified unobstructed free-space distance.
  • Front Tamper Protection: Helps identify unauthorised housing opening.
  • Rear Tamper Protection: Helps identify removal from the mounting surface.
  • Temperature Indication: Supported environmental temperature information.
  • Signal Strength Indication: Supports professional wireless commissioning.
  • Three LED Indicators: Green PIR, red microwave and blue alarm indication.
  • Remote Configuration: Supported through compatible Hikvision applications.
  • Multiple Enrolment Methods: Power-up, Remote ID and QR code.
  • Battery Powered: Uses two CR123A lithium batteries.
  • Up to 5 Years Standby: Under manufacturer-specified conditions.
  • Easy Battery Replacement: PCB-protected battery replacement design.
  • Wall Mounting: Recommended mounting height of 1.8–2.4m.
  • Optional Mounting Brackets: Compatible wall and ceiling accessories available separately.
  • Compact Design: 65.5 × 103 × 48.5mm.
  • Indoor Installation: Designed for protected indoor environments.

Technical Specifications

Brand Hikvision
Model DS-PDD12P-EG2-WB
Series AX PRO
Product Type Wireless Dual-Tech Motion Detector
Detection Method Passive Infrared + Microwave
Detection Range 12m
Detection Angle 85.9°
Detection Zones 52
Detectable Speed 0.3–2m/s
Sensitivity Settings Auto / High / Pet
Pet Immunity Up to 30kg
Microwave Frequency 24GHz (24.15–24.25GHz)
White-Light Filter 6500 Lux
Digital Temperature Compensation Supported
Creep-Zone Protection Supported
Digital Processing Supported
Sealed Optics Supported
Front Tamper Protection Supported
Rear Tamper Protection Supported
Environmental Temperature Indication Supported
Signal Strength Indication Supported
LED Indicators Green (PIR), Red (Microwave), Blue (Alarm)
Wireless Technology Hikvision Tri-X
Wireless Communication Two-Way RF
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 1.2km (Free Space)
Frequency Hopping Supported
Enrolment Methods Power-Up / Remote ID / QR Code
Remote Configuration Supported
Power Supply Battery Powered
Battery Type 2 × CR123A Lithium
Typical Voltage 3V
Battery Life Up to 5 Years (Standby)
Operating Temperature −10°C to +55°C
Storage Temperature −20°C to +60°C
Operating Humidity 10–90%
Dimensions (W × H × D) 65.5 × 103 × 48.5mm
Weight 141g
Mounting Height 1.8–2.4m
Mounting Method Wall
Optional Accessories Compatible Wall / Ceiling Brackets
Installation Environment Indoor
Compatible Systems Supported Hikvision AX PRO 433MHz Control Panels

Detailed Features & Benefits

Advanced Dual-Technology Motion Detection

The DS-PDD12P-EG2-WB combines passive infrared and microwave detection technologies to improve intrusion detection reliability and help reduce unwanted alarms.

12-Metre Motion Detection Range

The detector provides a maximum manufacturer-specified detection range of 12 metres for suitable indoor applications.

85.9-Degree Detection Angle

The wide detection angle provides coverage across suitable rooms and protected areas.

52 Detection Zones

Advanced optical coverage incorporates 52 detection zones for reliable motion detection.

24GHz Microwave Detection

The integrated microwave sensor operates between 24.15GHz and 24.25GHz, providing an additional motion detection method.

Reduced Microwave Wall Penetration

Hikvision's 24GHz microwave design helps reduce unwanted detection beyond suitable room boundaries.

30kg Pet Immunity

Pet immunity helps reduce unwanted alarm activations from suitable household pets when the detector is installed and configured correctly.

Three Selectable Sensitivity Settings

Auto, High and Pet settings allow professional installers to configure detection sensitivity according to the protected environment.

Advanced 3D Optical Design

3D optics help provide comprehensive detection coverage within the specified protection area.

Creep-Zone Protection

Creep-zone protection helps detect movement close to the detector's mounting position.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance when environmental temperatures change.

6500 Lux White-Light Filter

The white-light filter helps reduce unwanted interference from strong visible light.

Sealed Optical Chamber

Sealed optics help protect internal optical components against contamination.

Digital Signal Processing

Advanced digital processing helps analyse detection signals for reliable alarm operation.

433MHz Hikvision Tri-X Wireless Technology

Tri-X communication enables secure integration with compatible Hikvision AX PRO 433MHz control panels.

Two-Way Wireless Communication

Two-way RF communication supports the exchange of alarm and device status information.

AES-128 Wireless Encryption

AES-128 encryption helps protect wireless communication between the detector and compatible AX PRO systems.

Frequency Hopping

Frequency hopping helps maintain reliable communication in suitable radio environments.

Up to 1.2km Free-Space Wireless Range

Hikvision specifies a maximum wireless transmission distance of 1.2 kilometres in unobstructed free-space conditions.

Front Tamper Protection

Front tamper protection helps identify unauthorised opening of the detector housing.

Rear Tamper Protection

Rear tamper protection helps identify removal from the mounting surface.

Environmental Temperature Indication

Supported temperature information provides additional environmental status through compatible alarm system functions.

Wireless Signal Strength Indication

Signal strength information helps professional installers assess wireless communication during commissioning.

Three-Colour LED Indication

Green, red and blue LEDs indicate supported PIR, microwave and alarm events.

Remote Application Configuration

Supported detector settings can be configured through compatible Hikvision alarm management applications.

Convenient Wireless Enrolment

Power-up, Remote ID and QR code enrolment methods simplify professional installation.

Battery-Powered Operation

Two CR123A lithium batteries power the detector without requiring conventional alarm signal wiring.

Up to Five Years Standby Battery Life

Hikvision specifies up to five years of standby battery operation under defined conditions.

Professional Indoor Wall Installation

The recommended mounting height is 1.8 to 2.4 metres, with compatible optional mounting accessories available separately.

Compact Detector Housing

Measuring 65.5 × 103 × 48.5mm, the detector is suitable for discreet professional indoor installation.

Ideal Applications

  • Residential Homes: Dual-technology indoor intrusion detection.
  • Living Rooms: Motion detection for suitable residential spaces.
  • Commercial Offices: Professional indoor alarm protection.
  • Retail Stores: Motion detection for shop floors and protected areas.
  • Showrooms: Reliable indoor security monitoring.
  • Reception Areas: Additional intrusion detection.
  • Workshops: Indoor motion detection where environmental conditions are suitable.
  • Properties with Pets: Pet-immune detection for suitable household animals.
  • AX PRO Alarm Upgrades: Additional wireless dual-technology motion detection.
  • Professional Security Installations: Suitable for trained security technicians.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDD12P-EG2-WB.

Series: AX PRO.

Detector Type: Wireless Dual-Tech PIR & Microwave Motion Detector.

Detection Range: 12m.

Detection Angle: 85.9°.

Pet Immunity: Up to 30kg.

Wireless Frequency: 433MHz.

Wireless Technology: Hikvision Tri-X.

Power: 2 × CR123A lithium batteries.

Recommended Mounting Height: 1.8–2.4m.

Mounting: Indoor wall installation.

Compatible Systems: Supported Hikvision AX PRO 433MHz control panels.

Recommended Installation Procedure

  • Confirm the supplied detector model and hardware revision.
  • Verify compatibility with the intended Hikvision AX PRO control panel.
  • Confirm the control panel supports 433MHz Tri-X wireless devices.
  • Review the official Hikvision installation instructions.
  • Identify the indoor area requiring motion detection.
  • Confirm the required coverage falls within the 12m detection range.
  • Consider the 85.9-degree detection angle.
  • Select a suitable mounting position between 1.8 and 2.4 metres high.
  • Consider the detector's 52-zone optical coverage.
  • Ensure the mounting surface is stable.
  • Avoid locations exposed directly to rain or outdoor weather.
  • Consider nearby heaters, air-conditioning outlets and ventilation equipment.
  • Avoid unsuitable positions exposed to rapid temperature changes.
  • Consider direct sunlight and strong reflections.
  • Consider the effect of moving curtains and other environmental movement.
  • Evaluate nearby metal structures and potential wireless interference.
  • Confirm the detector is within reliable communication range of the AX PRO panel.
  • Assess whether pet immunity is required.
  • Follow the manufacturer's mounting requirements for pet-immune operation.
  • Ensure pets cannot access furniture or elevated surfaces that compromise pet immunity.
  • Install the mounting base securely.
  • Ensure the rear tamper mechanism operates correctly.
  • Install the specified CR123A lithium batteries.
  • Power up the detector.
  • Enrol the detector using a supported method.
  • Assign the detector to the intended alarm zone.
  • Configure Auto, High or Pet sensitivity as required.
  • Verify wireless communication with the control panel.
  • Check supported signal strength information.
  • Perform a controlled walk test across the protected area.
  • Verify PIR detection indication.
  • Verify microwave detection indication.
  • Confirm the detector reports alarm events correctly.
  • Check creep-zone detection where applicable.
  • Test front tamper protection.
  • Test rear tamper protection.
  • Verify battery condition reporting.
  • Confirm the detector operates correctly when the system is armed.
  • Review supported alarm notifications.
  • Record the completed configuration.
  • Complete professional commissioning and user handover.

Dual-Technology Notice: Detection performance depends on correct PIR and microwave coverage, sensitivity configuration and environmental conditions.

Pet Immunity Notice: Pet immunity up to 30kg is conditional on correct installation and suitable pet behaviour. It does not guarantee that pets will never trigger an alarm.

Microwave Notice: The detector operates at 24GHz. Position and configure the device according to the manufacturer's recommendations to minimise unwanted detection.

Wireless Compatibility Notice: The DS-PDD12P-EG2-WB operates at 433MHz. Compatibility with 868MHz-only AX PRO control panels must not be assumed.

Wireless Range Notice: The specified 1.2km wireless range applies to unobstructed free-space conditions. Actual indoor range may be significantly shorter.

Battery Notice: Use two manufacturer-specified CR123A lithium batteries and follow Hikvision's recommended battery replacement procedure.

Indoor Use Notice: This detector is designed for indoor installation and must not be exposed directly to outdoor weather conditions.

Professional Installation Notice: Installation and commissioning by a suitably qualified security technician are recommended.

Package Contents

  • 1 × Hikvision DS-PDD12P-EG2-WB AX PRO Wireless Dual-Tech Detector

Package Contents Notice: The detector requires two CR123A lithium batteries. Confirm battery inclusion, mounting hardware and printed documentation against the supplied packaging. A compatible AX PRO control panel and optional mounting brackets are sold separately unless expressly specified.

Frequently Asked Questions

What is the Hikvision DS-PDD12P-EG2-WB?

It is a wireless dual-technology motion detector designed for compatible Hikvision AX PRO alarm systems.

What does dual-technology detection mean?

It combines passive infrared and microwave sensing technologies to detect movement.

Does it use both PIR and microwave detection?

Yes.

What is the maximum detection range?

12 metres.

What is the detection angle?

85.9 degrees.

How many detection zones does it have?

52 detection zones.

What movement speed can it detect?

Approximately 0.3 to 2 metres per second.

What microwave frequency does it use?

24GHz, specifically 24.15–24.25GHz.

Why does it use microwave detection?

Microwave sensing provides an additional detection method alongside passive infrared sensing.

Does dual-technology detection help reduce false alarms?

Yes. Combining two detection methods can help reduce unwanted alarms when the detector is correctly installed and configured.

Does it support pet immunity?

Yes, up to 30kg under suitable installation conditions.

Will a 30kg pet always be ignored?

No. Pet immunity depends on mounting position, detector configuration and the animal's movement.

What sensitivity settings are available?

Auto, High and Pet.

Does it support creep-zone protection?

Yes.

What is creep-zone protection?

It provides additional detection coverage close to the detector's mounting location.

Does it have digital temperature compensation?

Yes.

What does digital temperature compensation do?

It helps maintain PIR detection performance as environmental temperatures change.

Does it have a white-light filter?

Yes, rated at 6500 lux.

Does it use sealed optics?

Yes.

Does it support digital signal processing?

Yes.

Is the DS-PDD12P-EG2-WB wireless?

Yes.

What wireless frequency does it use?

433MHz.

Does it use Hikvision Tri-X?

Yes.

Does it support two-way wireless communication?

Yes.

Does it support AES-128 encryption?

Yes.

Does it support frequency hopping?

Yes.

What is the maximum wireless transmission range?

Up to 1.2 kilometres in unobstructed free-space conditions.

Will it achieve 1.2km wireless range inside a building?

Not necessarily. Walls, metal structures and radio interference can significantly reduce wireless range.

Can it connect to the Hikvision DS-PWA96-M-WB?

It is designed for compatible 433MHz AX PRO systems. Confirm the control panel firmware and supported device list before installation.

Can it be added to the DS-PWA96-Kit-WB?

Yes, where the included control panel supports this detector and has sufficient available zone capacity.

Can it connect to an 868MHz-only AX PRO panel?

Compatibility should not be assumed because this detector operates at 433MHz.

Can it work without an AX PRO control panel?

No. A compatible alarm control panel is required for normal alarm system operation.

Does it connect directly to Wi-Fi?

No. It uses Hikvision Tri-X wireless communication.

Does it require alarm signal cables?

No. Communication with the compatible AX PRO panel is wireless.

What batteries does it use?

Two CR123A lithium batteries.

What is the typical battery voltage?

3V.

What is the expected battery life?

Up to five years of standby operation under manufacturer-specified conditions.

Will frequent alarm activity affect battery life?

Yes. Actual battery life depends on detector activity, wireless conditions and environmental factors.

Can the batteries be replaced?

Yes, using the specified battery type and the manufacturer's replacement procedure.

Does it have front tamper protection?

Yes.

Does it have rear tamper protection?

Yes.

What does front tamper protection do?

It helps identify unauthorised opening of the detector housing.

What does rear tamper protection do?

It helps identify removal from the mounting surface.

Does it support wireless signal strength indication?

Yes.

Does it support environmental temperature indication?

Yes, through compatible system functions.

Does it have LED indicators?

Yes. It includes green, red and blue detection indicators.

What does the green LED indicate?

PIR detection.

What does the red LED indicate?

Microwave detection.

What does the blue LED indicate?

Alarm indication.

Can the detector be configured remotely?

Yes, through compatible Hikvision alarm management applications.

How is the detector enrolled?

Using supported power-up, Remote ID or QR code enrolment methods.

What is the recommended mounting height?

1.8 to 2.4 metres.

Can it be wall-mounted?

Yes.

Can it be ceiling-mounted?

Optional compatible mounting accessories may support alternative mounting arrangements.

Can it be installed outdoors?

No. It is designed for indoor installation.

What is the operating temperature range?

−10°C to +55°C.

What is the operating humidity range?

10–90% relative humidity.

What are the detector dimensions?

65.5 × 103 × 48.5mm.

How much does it weigh?

Approximately 141g.

Can it be installed in residential homes?

Yes.

Is it suitable for offices?

Yes.

Can it be used in retail stores?

Yes, as part of a compatible AX PRO alarm installation.

Does it contain a camera?

No.

Does it provide image verification?

No. It is a dual-technology motion detector without an integrated camera.

Does it record video?

No.

Does it include professional alarm monitoring?

No. Alarm monitoring is a separate service.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but no longer provides alarm monitoring services.

Does it require professional installation?

Professional installation is recommended to ensure correct mounting, dual-technology detection and wireless communication.

Where can I buy the Hikvision DS-PDD12P-EG2-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including wireless alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance selecting compatible Hikvision alarm equipment.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless dual-tech detectors, alarm control panels and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDD12P-EG2-WB datasheet and user manual for detection performance, microwave specifications, wireless communication, battery requirements and installation instructions.

Download Official Hikvision DS-PDD12P-EG2-WB Datasheet (PDF)

Download Official Hikvision Dual-Tech Detector User Manual (PDF)

View Official Hikvision DS-PDD12P-EG2-WB Product Specifications

Important: The Hikvision DS-PDD12P-EG2-WB is a 433MHz AX PRO wireless dual-technology PIR and 24GHz microwave detector featuring 12m detection range, 85.9° coverage, 30kg pet immunity, AES-128 encryption, front and rear tamper protection and up to 1.2km free-space wireless communication. It uses two CR123A lithium batteries and requires a compatible AX PRO control panel. Detection performance depends on installation position, sensitivity settings, environmental conditions and correct system configuration. This detector is intended for indoor use only.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch