Hikvision DS-PDMCS-EG2-WB AX PRO Wireless Slim Magnetic Door & Window Contact – 433MHz
The Hikvision DS-PDMCS-EG2-WB AX PRO Wireless Slim Magnetic Contact is a compact, low-profile opening detector designed for compatible Hikvision AX PRO wireless intrusion alarm systems.
Featuring an exceptionally slim housing measuring just 10mm deep, the DS-PDMCS-EG2-WB provides discreet magnetic opening detection for suitable doors, windows and other protected indoor entry points.
Its compact two-piece design consists of a wireless detector and a separate magnetic component. When the protected door or window opens and the magnet moves away from the detector, the device reports the opening event to the connected Hikvision AX PRO alarm control panel.
The DS-PDMCS-EG2-WB offers a manufacturer-specified maximum magnetic detection gap of 52mm, providing installation flexibility on suitable mounting surfaces.
Actual detection performance depends on correct alignment, mounting material, magnet position and installation conditions.
Designed for professional security applications, the detector uses 433MHz Hikvision Tri-X wireless technology to communicate with compatible AX PRO alarm control panels.
Its two-way wireless communication supports the exchange of alarm events and relevant device status information.
Advanced AES-128 encryption helps protect wireless transmissions, while frequency hopping technology supports reliable communication in suitable radio environments.
Hikvision specifies a maximum wireless transmission range of 1 kilometre in unobstructed free-space conditions.
Actual wireless range may be reduced by walls, building materials, metal structures, electrical interference and the installation environment.
The detector incorporates front and rear tamper protection, helping identify unauthorised opening or removal of the device.
It also supports digital processing, environmental temperature indication and wireless signal strength indication through compatible AX PRO system functions.
A built-in blue LED indicator provides local visual indication during supported alarm events.
For convenient professional commissioning, the DS-PDMCS-EG2-WB supports multiple enrolment methods, including power-up, Remote ID and QR code enrolment.
Supported settings can be configured remotely through compatible Hikvision alarm management applications.
The detector operates using one CR2450 3V lithium battery, eliminating the need for conventional alarm signal cabling.
Hikvision specifies a standard battery operating life of approximately three years under defined conditions.
Actual battery life depends on opening frequency, wireless communication conditions, temperature and battery quality.
The slim detector measures 29 × 69 × 10mm, while the matching magnetic component measures 14 × 69 × 10mm.
With a total specified weight of approximately 38g, the DS-PDMCS-EG2-WB is particularly suitable for discreet installation where conventional magnetic contacts may appear bulky.
The detector is designed for indoor installation and supports operating temperatures from −10°C to +55°C.
Its low-profile design is suitable for residential homes, offices, retail stores, showrooms and other indoor premises requiring professional door and window opening detection.
For comprehensive intrusion protection, the slim magnetic contact can be combined with compatible Hikvision AX PRO PIR detectors, dual-technology detectors, glass break detectors, keypads and wireless sounders.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Important: The DS-PDMCS-EG2-WB is a magnetic opening detector. It does not independently detect glass breakage, vibration or general movement. A compatible Hikvision AX PRO 433MHz control panel is required for normal alarm operation.
2-Year Australian Warranty – Subject to applicable product warranty terms and Australian Consumer Law.
Key Features
- Ultra-Slim Magnetic Contact: Discreet opening detection for suitable doors and windows.
- Hikvision AX PRO: Designed for compatible wireless intrusion alarm systems.
- 10mm Slim Housing: Low-profile installation for suitable frames.
- 52mm Maximum Detection Gap: Manufacturer-specified magnetic opening distance.
- Magnetic Opening Detection: Monitors separation between the detector and magnet.
- Door Protection: Suitable for compatible indoor doors.
- Window Protection: Suitable for compatible indoor windows.
- 433MHz Wireless Communication: Designed for compatible Australian AX PRO systems.
- Hikvision Tri-X Technology: Advanced two-way wireless alarm communication.
- AES-128 Encryption: Helps protect wireless transmissions.
- Frequency Hopping: Supports reliable communication in suitable radio environments.
- 1km Wireless Range: Maximum manufacturer-specified free-space distance.
- Digital Processing: Supported opening detection processing.
- Front Tamper Protection: Helps identify unauthorised opening of the housing.
- Rear Tamper Protection: Helps identify removal from the mounting surface.
- Blue Alarm LED: Local visual indication during supported alarm events.
- Temperature Indication: Supported environmental temperature information.
- Signal Strength Indication: Assists professional wireless commissioning.
- Remote Configuration: Supported through compatible Hikvision applications.
- Multiple Enrolment Methods: Power-up, Remote ID and QR code.
- Battery Powered: Uses one CR2450 lithium battery.
- 3V Operating Voltage: Compact battery-powered design.
- Up to 3 Years Battery Life: Under manufacturer-specified conditions.
- Compact Detector: 29 × 69 × 10mm.
- Slim Magnet: 14 × 69 × 10mm.
- Lightweight Construction: Approximately 38g.
- Indoor Installation: Designed for protected indoor environments.
- Professional Alarm Integration: Suitable for compatible AX PRO system expansions.
Technical Specifications
Detailed Features & Benefits
Ultra-Slim Door and Window Protection
The DS-PDMCS-EG2-WB features a slim 10mm housing depth, allowing discreet installation on suitable indoor door and window frames.
Low-Profile Magnetic Contact Design
The compact detector and matching magnetic component provide an unobtrusive security solution for locations where a conventional magnetic contact may appear bulky.
Reliable Magnetic Opening Detection
The detector monitors separation between its sensor and magnet, reporting opening events to the connected AX PRO alarm control panel.
52mm Maximum Magnetic Detection Gap
The manufacturer specifies a maximum detection gap of 52mm. Actual performance depends on mounting surface, alignment and magnet position.
Compact Two-Piece Construction
The detector and magnet can be positioned on suitable fixed and moving parts of a door or window assembly.
433MHz Hikvision Tri-X Wireless Technology
Tri-X wireless communication enables integration with compatible Hikvision AX PRO 433MHz alarm systems.
Two-Way Wireless Communication
Two-way RF communication supports the exchange of opening detection events and relevant device status information.
AES-128 Wireless Encryption
AES-128 encryption helps protect wireless communication between the detector and compatible AX PRO control panels.
Frequency Hopping Technology
Frequency hopping supports reliable wireless communication in suitable radio environments.
Up to 1km Free-Space Wireless Range
Hikvision specifies a maximum transmission distance of 1 kilometre in unobstructed free-space conditions.
Front Tamper Protection
Front tamper protection helps identify unauthorised opening of the detector housing.
Rear Tamper Protection
Rear tamper protection helps identify removal of the detector from its mounting surface.
Digital Detection Processing
Digital processing supports reliable magnetic opening detection and alarm event reporting.
Blue Alarm LED Indicator
The integrated blue LED provides visual indication during supported alarm events.
Environmental Temperature Indication
Supported temperature information can be viewed through compatible AX PRO system functions.
Wireless Signal Strength Indication
Signal strength information assists professional installers in assessing wireless communication during commissioning.
Remote Application Configuration
Supported detector settings can be managed through compatible Hikvision alarm management applications.
Multiple Enrolment Methods
Power-up, Remote ID and QR code enrolment methods simplify professional installation.
Battery-Powered Operation
The detector operates using one CR2450 lithium battery, eliminating the need for conventional alarm signal cabling.
Approximately Three Years Battery Life
Hikvision specifies a standard battery life of approximately three years under defined operating conditions.
Compact Detector Dimensions
The detector measures just 29 × 69 × 10mm, making it suitable for discreet installation on compatible indoor frames.
Slim Magnetic Component
The matching magnet measures 14 × 69 × 10mm, complementing the detector's low-profile design.
Lightweight Construction
With a specified weight of approximately 38g, the detector is compact and lightweight.
Professional Indoor Installation
The DS-PDMCS-EG2-WB is designed for protected indoor environments and supports operating temperatures from −10°C to +55°C.
Ideal Applications
- Residential Entry Doors: Discreet opening detection for suitable indoor door frames.
- Residential Windows: Slim magnetic protection for compatible windows.
- Timber Door Frames: Suitable installations following manufacturer requirements.
- Commercial Offices: Low-profile door and window security.
- Retail Stores: Discreet magnetic opening detection.
- Showrooms: Unobtrusive security for suitable entry points.
- Reception Areas: Monitoring of suitable internal access doors.
- Commercial Premises: Professional wireless perimeter protection.
- Internal Doors: Opening detection where required by the security design.
- AX PRO Alarm Expansions: Additional slim magnetic contact protection.
- Professional Security Installations: Suitable for trained security technicians.
Compatibility & Installation
Manufacturer: Hikvision.
Model: DS-PDMCS-EG2-WB.
Series: AX PRO.
Detector Type: Wireless Slim Magnetic Contact.
Maximum Detection Gap: 52mm.
Wireless Frequency: 433MHz.
Wireless Technology: Hikvision Tri-X.
Power: One CR2450 lithium battery.
Mounting: Suitable non-metallic indoor door and window frames.
Compatible Systems: Supported Hikvision AX PRO 433MHz control panels.
Recommended Installation Procedure
- Confirm the exact DS-PDMCS-EG2-WB model and hardware revision.
- Verify compatibility with the intended Hikvision AX PRO control panel.
- Confirm the panel supports 433MHz Tri-X wireless devices.
- Check available wireless detector capacity.
- Review the official Hikvision installation instructions.
- Identify the door or window requiring protection.
- Inspect the frame and opening mechanism.
- Confirm the mounting surface is suitable.
- Follow Hikvision's guidance for non-metallic mounting surfaces.
- Avoid direct installation on metal surfaces.
- Confirm sufficient space is available for the detector and magnet.
- Select a suitable indoor mounting position.
- Align the detector and magnet according to their positioning marks.
- Check the manufacturer's magnetic detection performance table.
- Confirm the closed-position magnetic gap is suitable.
- Do not assume the maximum 52mm detection gap applies to every mounting surface.
- Ensure the detector and magnet do not interfere with door or window movement.
- Confirm reliable wireless communication with the control panel.
- Install the detector securely using an approved mounting method.
- Install the magnetic component securely.
- Ensure the rear tamper mechanism operates correctly.
- Install or activate the specified CR2450 lithium battery.
- Power up the detector.
- Enrol the detector using a supported enrolment method.
- Assign the detector to the intended alarm zone.
- Configure the required opening detection response.
- Verify wireless communication with the control panel.
- Check supported signal strength information.
- Close the protected door or window.
- Confirm the detector reports the correct closed state.
- Open the protected door or window.
- Confirm the detector reports the opening event.
- Repeat opening and closing tests several times.
- Verify reliable detection at the installed magnetic gap.
- Test front tamper protection.
- Test rear tamper protection.
- Verify battery condition reporting where supported.
- Confirm the detector operates correctly when the alarm is armed.
- Review supported alarm notifications.
- Record the completed installation and system configuration.
- Complete professional commissioning and user handover.
Detection Gap Notice: The maximum specified detection gap is 52mm. Actual performance depends on alignment, mounting surface and installation conditions.
Metal Surface Notice: Hikvision's mounting guidance restricts installation on metal surfaces. Use suitable non-metallic mounting locations and follow the manufacturer's installation instructions.
Wireless Compatibility Notice: The DS-PDMCS-EG2-WB operates at 433MHz. Compatibility with 868MHz-only AX PRO control panels must not be assumed.
Wireless Range Notice: The specified 1km wireless range applies to unobstructed free-space conditions. Actual indoor range may be significantly shorter.
Battery Notice: Use the manufacturer-specified CR2450 lithium battery and follow Hikvision's recommended replacement procedure.
Indoor Use Notice: This detector is designed for indoor installation and must not be exposed directly to outdoor weather conditions.
Professional Installation Notice: Installation and commissioning by a suitably qualified security technician are recommended.
Package Contents
- 1 × Hikvision DS-PDMCS-EG2-WB Wireless Slim Magnetic Contact Detector
- 1 × Matching Magnetic Component
- 1 × CR2450 Lithium Battery – Included according to the manufacturer's user manual.
Package Contents Notice: Confirm mounting accessories and printed documentation against the supplied packaging. A compatible Hikvision AX PRO control panel is sold separately unless expressly included in a bundle.
Frequently Asked Questions
What is the Hikvision DS-PDMCS-EG2-WB?
It is a slim wireless magnetic opening detector designed for compatible Hikvision AX PRO alarm systems.
What does a slim magnetic contact do?
It detects the opening of suitable doors and windows using a detector and matching magnetic component.
How is it different from a standard magnetic contact?
The slim design is intended for more discreet installation on suitable narrow door and window frames.
How slim is the detector?
The detector housing is approximately 10mm deep.
What is the maximum magnetic detection gap?
52mm under manufacturer-specified conditions.
Will it always work with a 52mm gap?
No. Actual detection performance depends on mounting surface, magnet alignment and installation conditions.
Does it detect when a door opens?
Yes.
Does it detect when a window opens?
Yes, when correctly installed on a suitable window.
Does it detect glass breaking?
No. A separate glass break detector is required for acoustic glass break detection.
Does it detect vibration or shock?
No. This model is designed for magnetic opening detection.
Does it detect movement like a PIR sensor?
No.
Does it contain a camera?
No.
Does it record video?
No.
Can it be installed on timber doors?
Yes, where the installation arrangement meets Hikvision's requirements.
Can it be installed directly on metal frames?
Hikvision's mounting guidance restricts installation on metal surfaces. Select a suitable non-metallic mounting location and follow the official installation instructions.
Can it be installed on aluminium windows?
Direct installation on metal surfaces is not recommended. A suitably qualified installer should assess the mounting arrangement and manufacturer requirements.
Is the DS-PDMCS-EG2-WB wireless?
Yes.
What wireless frequency does it use?
433MHz.
Does it use Hikvision Tri-X?
Yes.
Does it support two-way wireless communication?
Yes.
Does it support AES-128 encryption?
Yes.
Does it support frequency hopping?
Yes.
What is the maximum wireless transmission range?
Up to 1 kilometre in unobstructed free-space conditions.
Will it achieve 1km wireless range inside a building?
Not necessarily. Building materials, metal structures and radio interference can reduce wireless range.
Can it connect to the Hikvision DS-PWA96-M-WB?
It is designed for compatible 433MHz AX PRO systems. Confirm the control panel firmware and supported device list before installation.
Can it be added to a Hikvision AX PRO alarm kit?
Yes, where the included control panel supports the detector and has available capacity.
Can it connect to an 868MHz-only AX PRO panel?
Compatibility should not be assumed because this detector operates at 433MHz.
Can it work without an AX PRO control panel?
No. A compatible alarm control panel is required for normal operation.
Does it connect directly to Wi-Fi?
No. It uses Hikvision Tri-X wireless communication.
Does it require alarm signal cables?
No. Communication with the AX PRO control panel is wireless.
Does it have a wired alarm input?
No wired alarm input is specified for this slim model. The larger DS-PDMC-EG2-WB is a different product with additional input functionality.
What battery does it use?
One CR2450 lithium coin-cell battery.
What is the battery voltage?
3V.
What is the expected battery life?
Approximately three years under manufacturer-specified operating conditions.
Can the battery be replaced?
Yes, using the specified CR2450 battery and Hikvision's replacement procedure.
Is the battery included?
The manufacturer's user manual identifies one included CR2450 battery. Confirm inclusion against the supplied packaging.
Does frequent opening affect battery life?
Yes. Actual battery life depends on opening frequency, wireless communication conditions and environmental factors.
Does it have front tamper protection?
Yes.
Does it have rear tamper protection?
Yes.
What does front tamper protection do?
It helps identify unauthorised opening of the detector housing.
What does rear tamper protection do?
It helps identify removal from the mounting surface.
Does it have an LED indicator?
Yes. It includes a blue alarm LED.
Does it support digital processing?
Yes.
Does it support wireless signal strength indication?
Yes.
Does it support environmental temperature indication?
Yes, through compatible system functions.
Can it be configured remotely?
Supported settings can be managed through compatible Hikvision alarm management applications.
How is the detector enrolled?
Using supported power-up, Remote ID or QR code enrolment methods.
Can it be installed on a front door?
Yes, where the mounting surface is suitable and the detector is protected from outdoor weather.
Can it be installed on a sliding door?
Potentially, where the mounting surface, magnetic alignment and operating gap meet manufacturer requirements.
Can it be installed on a window?
Yes, on suitable non-metallic indoor window frames.
Can it be installed outdoors?
No. This model is designed for indoor installation.
What is the operating temperature range?
−10°C to +55°C.
What is the storage temperature range?
−20°C to +60°C.
What is the operating humidity range?
10–90% relative humidity.
What are the detector dimensions?
29 × 69 × 10mm.
What are the magnet dimensions?
14 × 69 × 10mm.
How much does it weigh?
Approximately 38g.
Can it be used in residential homes?
Yes.
Can it be used in commercial offices?
Yes.
Can it be used in retail stores?
Yes, as part of a compatible AX PRO alarm installation.
Does it include professional alarm monitoring?
No. Alarm monitoring is a separate service.
Does Civic Electronic provide alarm monitoring?
No. Civic Electronic supplies security equipment and technical support but no longer provides alarm monitoring services.
Does it require professional installation?
Professional installation is recommended to ensure correct mounting, magnet alignment, wireless communication and alarm configuration.
Where can I buy the Hikvision DS-PDMCS-EG2-WB in Australia?
Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We specialise in genuine Australian Hikvision and HiLook security products, including wireless alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.
- Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
- Hikvision Training Centre: Professional product knowledge and installer training.
- Australian Warranty Support: Warranty assistance for eligible Hikvision products.
- Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
- Technical Support: Assistance selecting compatible Hikvision alarm equipment.
- Professional Installer Support: Support for security technicians and system integrators.
- Australia-Wide Delivery: Shipping available throughout Australia.
- Free Standard Shipping: Available on eligible orders of $300 or more.
- 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For Hikvision AX PRO wireless slim magnetic contacts, alarm control panels and professional installer support, contact Civic Electronic on 1300 024 842.
Official Hikvision Manufacturer Documentation
Review the official Hikvision DS-PDMCS-EG2-WB user manual for magnetic detection performance, wireless communication, battery requirements and installation specifications.
Download Official Hikvision DS-PDMCS-EG2-WB User Manual (PDF)
View Official Hikvision Australia DS-PDMCS-EG2-WB Product Information
Important: The Hikvision DS-PDMCS-EG2-WB is a 433MHz AX PRO wireless slim magnetic contact featuring a maximum 52mm detection gap, AES-128 encryption, two-way Tri-X wireless communication, front and rear tamper protection and up to 1km free-space wireless range. It uses one CR2450 lithium battery and requires a compatible AX PRO control panel. Actual detection performance depends on mounting surface and magnet alignment. Indoor use only.
Genuine Product Assurance, We are officially an authorized reseller of Hikvision
Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.
Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.
1. Free and Express Shipping
- Free Standard Shipping applies to all orders valued at $300 or more.
- Express Shipping is available for an additional $65 per order.
Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:
2. Order Processing
- Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
- Orders are processed Monday to Friday, excluding weekends and public holidays.
- Tracking information will be provided via email after 11:00 AM on the day the order is shipped.
All orders are dispatched using the most efficient postage method available to ensure timely delivery.
3. Delivery Timeframes
- Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
- Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
- Standard Shipping: Please allow up to 10 business days from dispatch.
If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.
4. Delivery Requirements and Limitations
- All deliveries require a signature upon receipt.
- Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
- If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
- We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.
Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.
We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.
If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.
5. Tracking Your Order
Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.
To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.
6. Additional Information
We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.
Price Beat Guarantee
At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.
How It Works
If you find a cheaper price, simply:
- Provide a link to the competitor's advertised product
- Confirm the seller is an authorised Australian reseller
- Submit your request before placing your order
Our team will verify the details and respond promptly.
Eligibility Requirements
To qualify for our Price Beat Guarantee, the following conditions must be met:
- The competitor must be an authorised Australian reseller
- The seller must operate as a legitimate Australian retail business
- The item must be identical (same brand, model number and specifications)
- The product must be brand new and currently in stock
- The price must be publicly advertised (not a private quote or member-only offer)
- The advertised price must include GST
- Shipping costs must be included in the total comparison
- The competitor must supply Australian warranty support
Exclusions
Our Price Beat Guarantee does not apply to:
- Dropshippers or intermediary sellers who do not physically stock the product
- Sellers operating without a verifiable Australian retail presence
- Businesses with no registered retail location or identifiable trading address
- Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
- Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
- Refurbished, used or open-box items
- Pricing errors or misprints
- Bundle deals, bonus offers or cashback promotions
- Trade, bulk or special contract pricing
Important Conditions
- Price Beat requests must be approved prior to purchase
- Approved offers are valid for 24 hours only
- Civic Electronic reserves the right to verify reseller authorisation status
- We reserve the right to decline requests that do not meet the above criteria
- This policy may be modified or withdrawn at any time without notice
Why Buy From Civic Electronic?
- 100% Genuine Products
- Authorised Australian Reseller
- Local Australian Warranty
- Real Stock, Not Dropshipped
- Expert Technical Support
- Fast & Secure Dispatch
Our Range of Accessories
Surveillance/CCTV Hard Drive for DVR/NVR 2TB
Western DigitalSurveillance Hard Drive for DVR/NVR 2TB Product brand is subject to change depending on stock availability. This product is supplied as an add-o...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 4TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 4TB Product brand is subject to change depending on stock availab...
View full detailsCAT6 Patch Lead Network Cable 20m
Cable AUCAT6 Patch Lead Network Cable Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmissio...
View full detailsCAT6 Patch Lead Network Cable 30m
Cable AUCAT6 Patch Lead Network Cable 30m Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmi...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 3TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 3TB Product brand is subject to change depending on stock availab...
View full details