Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDC10DM-EG2-WB AX PRO Wireless Dual-Tech AM Curtain Detector – 10m PIR & Microwave, 433MHz

Original price $96.00 - Original price $96.00
Original price
$96.00
$96.00 - $96.00
Current price $96.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDC10DM-EG2-WB AX PRO Wireless Dual-Tech AM Curtain Detector – 10m PIR & Microwave, 433MHz

The Hikvision DS-PDC10DM-EG2-WB AX PRO Wireless Dual-Tech Anti-Masking Curtain Detector is a professional indoor and outdoor intrusion detector combining passive infrared (PIR), 24GHz microwave detection and active infrared anti-masking protection.

Designed for compatible Hikvision AX PRO 433MHz wireless alarm systems, this advanced curtain detector provides narrow-angle intrusion detection for windows, doors, corridors, entrances and building perimeter protection.

Unlike conventional wide-angle PIR motion detectors, the DS-PDC10DM-EG2-WB creates a narrow 5-degree curtain detection pattern, making it particularly suitable for protecting defined entry points and narrow areas.

The detector supports a maximum detection range of 10 metres when wall-mounted and 5 metres when ceiling-mounted.

Its dual-technology design combines passive infrared sensing with microwave detection to help reduce unwanted alarms caused by environmental conditions affecting a single detection technology.

The integrated microwave sensor operates at 24GHz (24.15–24.25GHz).

With 32 detection zones and a detectable movement speed of 0.3–2m/s, the detector provides precise intrusion detection across its specified curtain pattern.

A major advantage of the DS-PDC10DM-EG2-WB is its active infrared anti-masking technology, which helps identify attempts to obstruct the detector's sensing area.

This additional protection makes the detector suitable for professional security installations where deliberate interference with intrusion detection equipment is a concern.

The detector also supports directional detection, allowing compatible systems to use movement direction as part of the detection configuration.

For wall-mounted installations, Hikvision specifies pet immunity up to 12kg when correctly installed and configured.

Pet immunity is not supported in ceiling-mounted installations.

Selectable Auto and Pet sensitivity modes provide configuration flexibility for professional security installers.

The detector incorporates digital temperature compensation, digital signal processing, sealed optics and creep-zone protection to support dependable operation.

Its 6,500 lux white light filter helps reduce interference from strong visible light.

For wireless communication, the detector uses Hikvision Tri-X two-way RF technology operating at 433MHz.

The manufacturer specifies a wireless transmission range of up to 1 kilometre in free-space conditions.

Wireless communication incorporates AES-128 encryption and frequency hopping to help protect communication and improve reliability in suitable radio environments.

The DS-PDC10DM-EG2-WB includes front and rear tamper protection to help identify unauthorised opening or removal of the detector.

Separate LED indications assist professional installers during commissioning and troubleshooting.

  • Green: PIR detection.
  • Red: Microwave detection.
  • Green and orange: Masking indication.
  • Blue: Alarm indication.

Powered by two CR123A 3V batteries, the detector offers a manufacturer-specified standby battery life of up to five years under suitable conditions.

Actual battery life depends on environmental temperature, alarm activity, wireless communication and battery condition.

With an IP65 weather-resistance rating, the DS-PDC10DM-EG2-WB is suitable for appropriately installed indoor and outdoor applications.

The detector operates across a wide temperature range of -25°C to +60°C.

Its slim housing measures 29.2 × 134.4 × 39.5mm, making it suitable for discreet installation alongside suitable windows and door frames.

Hikvision specifies a mounting height between 2 and 3.5 metres.

Both wall and ceiling mounting are supported, with an L-shaped mounting adapter included according to the manufacturer.

The DS-PDC10DM-EG2-WB is an excellent choice for security professionals requiring wireless dual-technology curtain detection with active anti-masking protection.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDC10DM-EG2-WB is a 433MHz wireless dual-technology detector. It requires a compatible Hikvision AX PRO control panel. Wall-mounted detection range is 10m; ceiling-mounted detection range is 5m. Pet immunity is specified only for suitable wall-mounted installations.

Hikvision DS-PDC10DM-EG2-WB AX PRO Wireless Dual-Tech AM Curtain Detector 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.

Key Features

  • Dual-Technology Detection: Combines PIR and microwave sensing.
  • Active Infrared Anti-Masking: Helps identify attempts to obstruct the detector.
  • 10m Wall-Mounted Detection: Suitable for defined entry-point protection.
  • 5m Ceiling-Mounted Detection: Narrow curtain coverage from an overhead position.
  • 5° Curtain Detection Angle: Precise detection across narrow protected areas.
  • 32 Detection Zones: Structured intrusion detection coverage.
  • 24GHz Microwave Sensor: Operates within 24.15–24.25GHz.
  • Directional Detection: Supports movement-direction detection.
  • Up to 12kg Pet Immunity: Available for suitable wall-mounted installations only.
  • Auto and Pet Sensitivity: Selectable operating modes.
  • Digital Temperature Compensation: Supports consistent PIR operation.
  • Digital Signal Processing: Helps analyse detection events.
  • Sealed Optics: Helps protect internal sensing components.
  • Creep-Zone Protection: Supports detection close to the detector.
  • 6,500 Lux White Light Filter: Helps reduce visible-light interference.
  • 433MHz Tri-X Wireless: Designed for compatible AX PRO systems.
  • Two-Way RF Communication: Supports communication with compatible alarm equipment.
  • Up to 1km Wireless Range: Manufacturer-specified free-space range.
  • AES-128 Encryption: Helps secure wireless communication.
  • Frequency Hopping: Supports reliable wireless operation.
  • Front and Rear Tamper Protection: Helps detect unauthorised interference.
  • Environmental Temperature Indication: Supported through compatible system functionality.
  • Wireless Signal Strength Indication: Assists with installation.
  • Colour-Coded LED Indicators: PIR, microwave, masking and alarm indications.
  • Multiple Enrolment Methods: Power-up, remote ID and QR code.
  • Battery Powered: Uses two CR123A batteries.
  • Up to Five-Year Standby Battery Life: Manufacturer-specified under suitable conditions.
  • IP65 Weather Resistance: Suitable for appropriately installed outdoor applications.
  • -25°C to +60°C Operation: Wide environmental temperature range.
  • Slim Housing: 29.2 × 134.4 × 39.5mm.
  • Wall or Ceiling Mounting: Installation flexibility.
  • Included L-Shaped Adapter: Manufacturer-specified mounting accessory.

Technical Specifications

Brand Hikvision
Model DS-PDC10DM-EG2-WB
Product Series AX PRO
Product Type Wireless Dual-Tech AM Curtain Detector
Detection Method Passive Infrared + Microwave
PIR Sensor Model SFG323-711
Wall-Mounted Detection Range 10m
Ceiling-Mounted Detection Range 5m
Detection Angle 5°
Detection Zones 32
Detectable Movement Speed 0.3–2m/s
Sensitivity Auto / Pet
Wall-Mounted Pet Immunity Up to 12kg
Ceiling-Mounted Pet Immunity Not Supported
Microwave Frequency 24GHz (24.15–24.25GHz)
Anti-Masking Active Infrared
Directional Detection Supported
White Light Filter 6,500 Lux
Digital Temperature Compensation Supported
Digital Processing Supported
Sealed Optics Supported
Creep-Zone Protection Supported
Tamper Protection Front and Rear
Environmental Temperature Indication Supported
Signal Strength Indication Supported
PIR LED Green
Microwave LED Red
Masking Indication Green + Orange
Alarm LED Blue
Wireless Technology Hikvision Tri-X
Transmission Method Two-Way RF
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 1km Free Space
Frequency Hopping Supported
Enrolment Power-Up / Remote ID / QR Code
Power Supply Battery Powered
Battery Type 2 × CR123A
Typical Voltage 3V
Battery Life Up to 5 Years Standby
Operating Temperature -25°C to +60°C
Storage Temperature -25°C to +60°C
Operating Humidity 10%–90%
Weather Resistance IP65
Dimensions (W × H × D) 29.2 × 134.4 × 39.5mm
Weight 120g
Mounting Height 2–3.5m
Mounting Method Wall / Ceiling
Application Indoor / Outdoor
Included Bracket L-Shaped Adapter

Detailed Features & Benefits

Advanced PIR and Microwave Dual-Technology Detection

The DS-PDC10DM-EG2-WB combines passive infrared and microwave sensing to deliver professional intrusion detection.

The PIR element responds to qualifying infrared changes associated with movement, while the microwave element detects motion using 24GHz sensing technology.

Combining these detection technologies helps reduce unwanted alarms compared with relying on a single sensing method in suitable environments.

Active Infrared Anti-Masking Protection

The detector incorporates active infrared anti-masking technology.

This helps identify attempts to obstruct the detector's sensing area, adding another layer of protection against interference.

Anti-masking functionality must be configured and tested according to Hikvision's instructions.

10-Metre Wall-Mounted Curtain Detection

When installed on a suitable wall, the detector provides a maximum specified detection range of 10 metres.

Its narrow curtain pattern makes it suitable for protecting windows, doors and defined perimeter areas.

5-Metre Ceiling-Mounted Detection

The detector also supports ceiling mounting, with a manufacturer-specified detection range of 5 metres.

Installers must use the appropriate coverage pattern for the selected mounting method.

Narrow 5-Degree Detection Angle

The 5-degree curtain detection pattern helps focus monitoring on a narrow protected area rather than a wide room.

This is particularly useful for suitable doorways, windows and passageways.

32 Detection Zones

The detector incorporates 32 detection zones to support structured intrusion detection.

Directional Detection

Directional detection allows compatible systems to use movement direction as part of the intrusion detection configuration.

Installers should confirm the required direction and test the configured response.

Up to 12kg Wall-Mounted Pet Immunity

Hikvision specifies pet immunity up to 12kg for suitable wall-mounted installations.

Pet immunity depends on correct mounting, sensitivity settings and environmental conditions.

Pet immunity is not specified for ceiling-mounted operation.

Auto and Pet Sensitivity Modes

The detector supports Auto and Pet sensitivity modes.

Professional installers can select the appropriate configuration according to the protected area.

24GHz Microwave Sensing

The microwave detection element operates within the 24.15–24.25GHz frequency range.

This sensing frequency is separate from the detector's 433MHz wireless communication frequency.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance as ambient temperatures change.

Digital Signal Processing

Digital processing supports the analysis of motion detection signals.

Sealed Optical Design

Sealed optics help protect the detector's internal sensing components.

Creep-Zone Protection

Creep-zone protection supports motion detection close to the detector.

6,500 Lux White Light Filtering

The integrated white light filter helps reduce interference caused by strong visible light sources.

Hikvision 433MHz Tri-X Wireless Communication

The detector communicates with compatible Hikvision AX PRO equipment using two-way Tri-X wireless technology.

The WB variant operates at 433MHz and must be matched with a compatible control panel or supported receiver.

Long-Range Wireless Transmission

Hikvision specifies up to 1km wireless communication in free-space conditions.

Actual wireless performance depends on the installation environment, construction materials and radio interference.

AES-128 Wireless Encryption

AES-128 encryption helps protect communication between the detector and compatible alarm equipment.

Frequency Hopping

Frequency hopping supports communication reliability in suitable wireless environments.

Front and Rear Tamper Protection

Front and rear tamper protection help identify unauthorised interference with the detector housing or mounting.

Colour-Coded LED Indications

Separate LED indications help installers identify PIR, microwave, masking and alarm events during commissioning.

Signal Strength Indication

Wireless signal strength indication assists with selecting a suitable installation location.

Environmental Temperature Indication

The detector supports environmental temperature indication through compatible system functionality.

Battery-Powered Operation

The detector operates from two CR123A 3V batteries.

Wireless communication eliminates the need for a dedicated alarm cable between the detector and the control panel.

Up to Five Years of Standby Battery Life

Hikvision specifies up to five years of standby battery life under suitable conditions.

Battery endurance can be significantly reduced at low temperatures.

IP65 Outdoor Weather Resistance

The IP65 rating provides protection against dust ingress and water jets under the relevant test conditions.

Correct mounting and sealing are essential for outdoor applications.

Wide Operating Temperature Range

The detector is specified for operation from -25°C to +60°C.

Slim Window and Door Frame Installation

Its slim 29.2mm-wide housing makes the detector suitable for discreet installation alongside appropriate frames and narrow structures.

Wall and Ceiling Mounting

The detector supports both wall and ceiling mounting, with different detection ranges for each method.

An L-shaped mounting adapter is included according to Hikvision's manufacturer documentation.

Ideal Applications

  • Window Protection: Narrow curtain detection across suitable windows.
  • Doorway Protection: Intrusion detection at designated entrances.
  • Building Perimeters: Protection of suitable external access areas.
  • Residential Security: Wireless intrusion detection for homes.
  • Commercial Offices: Monitoring suitable entry points and internal passages.
  • Retail Premises: Protecting shop entrances and vulnerable openings.
  • Showrooms: Defined perimeter and access-point detection.
  • Corridors: Narrow-area movement detection.
  • Covered Outdoor Entrances: IP65-rated intrusion detection where installation conditions are suitable.
  • AX PRO Alarm Upgrades: Adding a compatible wireless dual-tech curtain detector.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDC10DM-EG2-WB.

Series: AX PRO.

Detection: PIR + 24GHz Microwave.

Anti-Masking: Active Infrared.

Wall-Mounted Range: 10m.

Ceiling-Mounted Range: 5m.

Detection Angle: 5°.

Wireless Frequency: 433MHz.

Wireless Technology: Tri-X.

Battery: 2 × CR123A.

Mounting Height: 2–3.5m.

Mounting: Wall or Ceiling.

Environment: Indoor / Outdoor, IP65.

Compatible Systems: Supported Hikvision AX PRO control panels and compatible 433MHz wireless receivers.

Recommended Installation Procedure

  • Confirm compatibility with the intended Hikvision AX PRO control panel.
  • Verify that the system supports the 433MHz WB detector variant.
  • Review the official Hikvision datasheet and installation guide.
  • Identify the window, doorway or perimeter area requiring protection.
  • Determine whether wall or ceiling mounting is most appropriate.
  • Use the correct detection range for the selected mounting method.
  • Confirm the installation height is between 2 and 3.5 metres.
  • Assess the narrow 5-degree detection pattern.
  • Consider the required movement direction and directional detection settings.
  • Avoid unsuitable heat sources, moving objects and environmental disturbances.
  • Check the proposed mounting location for stable wireless communication.
  • Confirm that the mounting surface is suitable and secure.
  • For outdoor installations, assess exposure to water and environmental conditions.
  • Mount the detector according to Hikvision's instructions.
  • Use the supplied L-shaped adapter where appropriate.
  • Ensure the rear tamper mechanism operates correctly.
  • Install the specified CR123A batteries with correct polarity.
  • Enrol the detector using a supported registration method.
  • Confirm successful communication with the AX PRO control panel.
  • Configure the required alarm zone settings.
  • Select the appropriate sensitivity mode.
  • Configure directional detection where required.
  • Configure and test anti-masking functionality.
  • Perform the manufacturer's recommended walk test.
  • Test the entire intended curtain detection area.
  • Confirm the alarm panel receives the expected intrusion events.
  • Test front and rear tamper reporting.
  • Verify wireless signal strength and communication reliability.
  • Check for unwanted alarms under normal environmental conditions.
  • Secure the detector housing and verify weather-resistant installation.
  • Record the final installation configuration.
  • Complete system commissioning.

Detection Range Notice: Wall-mounted range is 10m; ceiling-mounted range is 5m. The 5-degree curtain detection pattern must be considered when positioning the detector.

Pet Immunity Notice: Pet immunity up to 12kg applies only to suitable wall-mounted installations. Ceiling-mounted pet immunity is not supported.

Outdoor Installation Notice: IP65 weather resistance does not eliminate the need for correct mounting, sealing and environmental assessment.

Wireless Compatibility Notice: The WB model operates at 433MHz. Compatibility with 868MHz-only AX PRO equipment must not be assumed.

Battery Notice: Use the specified battery type and follow Hikvision's battery replacement instructions. Keep lithium batteries away from children.

Package Contents

  • 1 × Hikvision DS-PDC10DM-EG2-WB Wireless Dual-Tech AM Curtain Detector
  • 1 × L-Shaped Mounting Adapter
  • 2 × CR123A Batteries – As specified in the manufacturer's installation guide.

Package Contents Notice: Printed documentation and additional mounting hardware may vary by supplied packaging. The AX PRO alarm control panel is sold separately unless otherwise specified.

Frequently Asked Questions

What is the Hikvision DS-PDC10DM-EG2-WB?

It is a wireless dual-technology curtain detector with PIR, microwave and active anti-masking protection.

Is this a dual-tech detector?

Yes. It combines passive infrared and microwave sensing.

What does AM mean?

AM stands for anti-masking.

Does it support active anti-masking?

Yes. It incorporates active infrared anti-masking technology.

What is the wall-mounted detection range?

10 metres.

What is the ceiling-mounted detection range?

5 metres.

What is the detection angle?

5 degrees.

What is curtain detection?

Curtain detection uses a narrow sensing pattern to monitor defined areas such as windows and doorways.

How many detection zones does it have?

32.

Does it support directional detection?

Yes.

Does it use microwave technology?

Yes. It includes a 24GHz microwave sensor.

What is the microwave frequency?

24.15–24.25GHz.

Is the microwave frequency the same as the wireless frequency?

No. Microwave sensing operates at 24GHz, while wireless alarm communication operates at 433MHz.

Does it support pet immunity?

Yes, up to 12kg in suitable wall-mounted installations.

Does pet immunity work when ceiling-mounted?

No. Hikvision specifies no pet immunity for ceiling mounting.

What sensitivity settings are available?

Auto and Pet.

Does it support digital temperature compensation?

Yes.

Does it have sealed optics?

Yes.

Does it support creep-zone protection?

Yes.

What is the white light filter rating?

6,500 lux.

Is the detector wireless?

Yes. It uses Hikvision Tri-X two-way wireless communication.

What wireless frequency does it use?

433MHz.

What is the maximum wireless range?

Up to 1km in free-space conditions.

Will it work 1km away through walls?

Not necessarily. Actual wireless range depends on the building materials and installation environment.

Does it support encryption?

Yes. AES-128 encryption is specified.

Does it support frequency hopping?

Yes.

Is it compatible with AX PRO?

Yes, with compatible 433MHz Hikvision AX PRO control panels or supported receivers.

Will it work with an 868MHz-only AX PRO panel?

Compatibility must not be assumed because this WB model operates at 433MHz.

Does it require alarm cabling?

No. It communicates wirelessly with compatible alarm equipment.

What batteries does it use?

Two CR123A batteries.

What is the battery voltage?

3V.

How long does the battery last?

Hikvision specifies up to five years of standby battery life under suitable conditions.

Does cold weather affect battery life?

Yes. Hikvision advises that battery life may be significantly reduced at low temperatures.

Are batteries included?

Yes. Hikvision's installation guide specifies two included CR123A batteries.

Does it have tamper protection?

Yes. Front and rear tamper protection are supported.

Does it support signal strength indication?

Yes.

Does it support environmental temperature indication?

Yes.

What does the green LED indicate?

PIR detection.

What does the red LED indicate?

Microwave detection.

What indicates masking?

A green and orange LED indication.

What colour indicates an alarm?

Blue.

Can it be installed outdoors?

Yes. Hikvision specifies indoor and outdoor applications with IP65 weather resistance.

What does IP65 mean?

It indicates protection against dust ingress and water jets under the applicable test conditions.

Can it be installed in direct rain?

It is weather-resistant, but installation must follow Hikvision's mounting and sealing requirements.

What is the operating temperature range?

-25°C to +60°C.

What is the recommended mounting height?

Between 2 and 3.5 metres.

Can it be wall-mounted?

Yes.

Can it be ceiling-mounted?

Yes, with a maximum specified detection range of 5m.

Is a mounting adapter included?

Yes. Hikvision specifies an included L-shaped adapter.

What are the dimensions?

29.2 × 134.4 × 39.5mm.

How much does it weigh?

Approximately 120g.

Can it protect windows?

Yes. Its narrow curtain detection pattern is suitable for appropriately positioned window protection.

Can it protect doorways?

Yes. It is suitable for monitoring defined doorway areas.

Can it be used for outdoor perimeter protection?

Yes, where the mounting position, detection pattern and environmental conditions are suitable.

Does it include a camera?

No.

Does it record video?

No. It is an intrusion alarm detector.

Does it send smartphone notifications?

Notifications depend on the connected alarm control panel and its configuration.

Does it require professional installation?

Professional installation is recommended to ensure correct positioning, anti-masking operation and wireless communication.

What is the difference between DS-PDC10DM-EG2-WB and DS-PDC10AM-EG2-WB?

The DS-PDC10DM-EG2-WB combines PIR and microwave detection, while the DS-PDC10AM-EG2-WB is a PIR-based anti-masking curtain detector.

What is the difference between WB and WE versions?

The WB version operates at 433MHz, while the WE version is intended for compatible 868MHz wireless systems.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDC10DM-EG2-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless curtain detectors, intrusion alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDC10DM-EG2-WB datasheet and installation guide for complete dual-technology detection specifications, anti-masking functionality, wireless communication, battery requirements and mounting instructions.

Download Official Hikvision DS-PDC10DM-EG2-WB Datasheet (PDF)

Download Official Hikvision DS-PDC10DM-EG2-WB Installation Guide (PDF)

View Official Hikvision Alarm Device Compatibility List

Important: The DS-PDC10DM-EG2-WB is a 433MHz wireless dual-technology curtain detector with active infrared anti-masking. It supports 10m wall-mounted detection, 5m ceiling-mounted detection, a 5° detection angle and IP65 weather resistance. Pet immunity up to 12kg applies only to suitable wall-mounted installations. Confirm control-panel compatibility before installation.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch