Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDSKM-VG3 Wired Seismic Detector – Vibration & Shock Detection for Security Alarms

Original price $76.00 - Original price $76.00
Original price
$76.00
$76.00 - $76.00
Current price $76.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDSKM-VG3 Wired Seismic Detector – Grade 3 Shock & Vibration Detection

The Hikvision DS-PDSKM-VG3 Wired Seismic Detector is a professional intrusion detection device designed to identify vibration, shock and physical attack attempts affecting protected structures and surfaces.

Featuring a high-quality G-sensor, advanced digital signal processing and adjustable sensitivity, the DS-PDSKM-VG3 provides early detection of qualifying physical attacks against suitable protected surfaces.

Unlike conventional PIR motion detectors, which identify movement within a detection area, the DS-PDSKM-VG3 detects mechanical disturbances transmitted through the surface to which it is securely mounted.

This makes the detector particularly suitable for security applications involving safes, ATM enclosures, strongrooms, reinforced structures, steel panels and other suitable protected surfaces.

Hikvision specifies a maximum detection radius of up to 5 metres, depending on the protected material, mounting arrangement, attack characteristics and detector configuration.

The detector features eight sensitivity levels, selectable using integrated DIP switches.

These settings allow professional installers to adjust the detector for different protected surfaces and environmental conditions.

Advanced digital background-noise filtering helps distinguish relevant attack-related vibrations from ordinary environmental disturbances.

The detector also supports high-noise adaptation, enabling installers to configure its operation according to the expected background-noise conditions.

Its gross attack override functionality is designed to assist detection of significant physical attacks.

For additional security, the DS-PDSKM-VG3 supports displacement detection, which can be enabled or disabled through its DIP-switch configuration.

The detector includes front and rear tamper protection to help identify unauthorised interference with the device or mounting arrangement.

Its wired interface provides separate alarm, fault and tamper connections, supporting integration with suitable alarm control panels.

The alarm output uses a normally closed contact, while selectable end-of-line resistor arrangements support different supervised wiring configurations.

The DS-PDSKM-VG3 supports normally closed, single end-of-line, double end-of-line and triple end-of-line wiring arrangements, subject to the capabilities of the connected alarm panel.

The detector operates from a 9–16V DC power supply, with a nominal operating voltage of 12V DC and maximum current consumption of 17mA.

Its durable die-cast metal housing provides excellent mechanical protection and features an IK10 impact resistance rating.

Designed for indoor installation, the detector supports an operating temperature range of -40°C to +70°C.

The compact housing measures 60 × 80 × 19.5mm and weighs approximately 226g.

The Hikvision DS-PDSKM-VG3 is a suitable solution for professional security installers requiring advanced seismic and shock detection for high-security applications.

It is compatible with selected Hikvision wired and hybrid alarm systems, including supported AX HYBRID PRO configurations, subject to control panel compatibility and correct wiring.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: This is a wired seismic detector. It is not a wireless AX PRO device, PIR motion detector, glass-break microphone or standalone alarm system. A compatible wired alarm input and suitable 9–16V DC power supply are required.

Hikvision DS-PDSKM-VG3 Wired Seismic Detector Australian Warranty

Australian Warranty Support – Confirm the applicable warranty period and terms for this model with Civic Electronic.

Key Features

  • Genuine Hikvision Wired Seismic Detector: Professional shock and vibration detection for suitable security applications.
  • High-Quality G-Sensor: Designed for early detection of qualifying physical attacks.
  • Up to 5m Detection Radius: Manufacturer-specified maximum detection range under suitable conditions.
  • Eight Sensitivity Levels: Adjustable through integrated DIP switches.
  • Advanced Digital Processing: Helps distinguish relevant vibration events from environmental disturbances.
  • Digital Background-Noise Filtering: Helps reduce unwanted alarms.
  • High-Noise Adaptation: Configurable for different environmental noise conditions.
  • Gross Attack Override: Supports detection of significant physical attacks.
  • Displacement Detection: Configurable through DIP-switch settings.
  • Front Tamper Protection: Detects supported interference with the detector housing.
  • Rear Tamper Protection: Helps identify interference with the mounting arrangement.
  • Normally Closed Alarm Output: Suitable for compatible wired alarm inputs.
  • Separate Alarm, Fault & Tamper Connections: Supports supervised alarm installations.
  • Selectable EOL Resistors: Supports multiple alarm wiring arrangements.
  • Blue Alarm LED: Visual indication of alarm events.
  • Red Noise Indicator: Provides visual feedback on detected background noise.
  • 9–16V DC Operation: Compatible with suitable low-voltage alarm power supplies.
  • Low Current Consumption: Maximum 17mA.
  • Die-Cast Metal Housing: Durable construction for professional security installations.
  • IK10 Impact Resistance: High mechanical impact protection rating.
  • Wide Operating Temperature: -40°C to +70°C.
  • Compact Design: 60 × 80 × 19.5mm.
  • Indoor Installation: Designed for protected indoor environments.
  • Grade 3 Security Classification: Manufacturer manual identifies EN 50131-2-8:2016 Security Grade 3.
  • Professional Alarm Integration: Suitable for selected wired and hybrid alarm systems.

Technical Specifications

Brand Hikvision
Model DS-PDSKM-VG3
Product Type Wired Seismic / Shock Detector
Detection Method G-Sensor Shock Detection
Detection Radius Up to 5m
Sensitivity Adjustment 8 Levels via DIP Switch
Digital Signal Processing Supported
Background-Noise Filtering Supported
High-Noise Adaptation Configurable
Gross Attack Override Supported
Displacement Alarm Enable / Disable via DIP Switch
Front Tamper Protection Supported
Rear Tamper Protection Supported
Alarm Output Normally Closed
Fault Output Separate Fault Connection
Tamper Output Separate Tamper Connection
EOL Wiring NC / SEOL / DEOL / TEOL
Selectable Alarm Resistors 1kΩ / 2.2kΩ / 4.7kΩ / 5.6kΩ / 6.8kΩ
Selectable Tamper Resistors 1kΩ / 2.2kΩ / 4.7kΩ / 5.6kΩ
Selectable Fault Resistors 1kΩ / 2.2kΩ / 5.6kΩ
LED – Alarm Blue
LED – Noise Indication Red
Transmission Method Wired
Power Supply 9–16V DC
Nominal Voltage 12V DC
Maximum Current Consumption 17mA
Operating Temperature -40°C to +70°C
Storage Temperature -50°C to +70°C
Operating Humidity 10%–90%
Housing Material Die-Cast Metal
Impact Resistance IK10
Dimensions (W × H × D) 60 × 80 × 19.5mm
Weight 226g
Installation Environment Indoor
Security Classification EN 50131-2-8:2016, Grade 3 (per manufacturer manual)
Environmental Class Class II (per manufacturer manual)

Detailed Features & Benefits

High-Quality G-Sensor Seismic Detection

The Hikvision DS-PDSKM-VG3 incorporates a high-quality G-sensor designed to detect shock and vibration transmitted through protected structures.

This enables the detector to identify qualifying physical attack attempts against suitable surfaces before an intruder successfully penetrates the protected structure.

Early Detection of Physical Attacks

Seismic detection is designed to respond to mechanical disturbances caused by physical attacks against a protected surface.

Depending on the installation, these disturbances may be associated with drilling, striking, cutting or other forced-entry activity.

Detection performance depends on the surface material, attack method, mounting quality and configured sensitivity.

Up to 5-Metre Detection Radius

Hikvision specifies a detection radius of up to 5 metres.

This is a maximum manufacturer rating rather than a guaranteed coverage distance for every surface.

Professional installers must assess the protected material and verify detection performance through appropriate testing.

Eight Adjustable Sensitivity Levels

The DS-PDSKM-VG3 provides eight sensitivity levels selectable through DIP switches.

This allows the detector to be configured for different surface materials and operating environments.

Hikvision's installation documentation provides example settings for concrete walls, steel plates, concrete plates, ATMs, safes and timber structures.

Advanced Digital Signal Processing

The detector incorporates digital processing technology to analyse mechanical disturbances.

This supports reliable detection while helping reduce unwanted alarms from ordinary background vibration.

Digital Background-Noise Filtering

Background vibration can be generated by machinery, traffic, building services and normal activity.

The DS-PDSKM-VG3 includes advanced digital background-noise filtering to help distinguish relevant attack-related vibration from environmental disturbances.

High-Noise Adaptation

The detector provides configurable high-noise adaptation through its DIP-switch settings.

This allows installers to adjust the detector's processing for the expected background-noise conditions.

Gross Attack Override

Gross attack override is designed to assist detection of significant physical attacks.

This provides an additional detection feature for high-security applications where substantial mechanical impacts may occur during an attempted intrusion.

Configurable Displacement Alarm

The DS-PDSKM-VG3 supports displacement alarm functionality.

This feature can be enabled or disabled through the detector's DIP switches.

Correct configuration should follow the manufacturer's instructions and the requirements of the protected installation.

Front and Rear Tamper Protection

The detector includes front and rear tamper protection.

These functions help identify interference with the detector housing or mounting arrangement.

Separate Alarm, Fault and Tamper Connections

The DS-PDSKM-VG3 provides separate alarm, fault and tamper terminals.

This supports professional alarm installations where individual conditions need to be monitored through compatible wired alarm inputs.

Normally Closed Alarm Output

The detector uses a normally closed alarm output.

During a supported alarm condition, the alarm relay changes state according to the manufacturer's wiring documentation.

Selectable End-of-Line Resistors

The detector includes selectable end-of-line resistor options.

Supported wiring arrangements include normally closed, single end-of-line, double end-of-line and triple end-of-line configurations.

The exact arrangement must match the capabilities and programmed resistance values of the connected alarm control panel.

Blue Alarm LED Indicator

The DS-PDSKM-VG3 features a blue LED indicator for alarm events.

The manufacturer's user manual specifies a solid blue alarm indication for approximately three seconds.

Red Background-Noise Indicator

A red LED provides noise-intensity indication.

This assists professional installers during sensitivity adjustment and commissioning.

9–16V DC Power Supply

The detector operates from a regulated 9–16V DC supply.

The nominal voltage is 12V DC, with a maximum current consumption of 17mA.

Use a suitable low-voltage power source meeting the manufacturer's requirements.

IK10 Impact-Resistant Housing

The detector features an IK10 mechanical impact resistance rating.

This provides enhanced protection against physical impacts to the detector enclosure.

Durable Die-Cast Metal Construction

The DS-PDSKM-VG3 uses a die-cast metal housing.

This construction is suitable for professional installations where mechanical durability is important.

Wide Operating Temperature Range

Hikvision specifies an operating temperature range of -40°C to +70°C.

Despite this wide temperature rating, the detector is specified for indoor installation.

Compact Professional Design

The detector measures 60 × 80 × 19.5mm and weighs approximately 226g.

Its compact construction allows installation on suitable protected surfaces.

Grade 3 Security Applications

The manufacturer's user manual identifies the detector as Security Grade 3 under EN 50131-2-8:2016.

This makes it suitable for consideration in appropriately designed higher-security alarm installations.

Compliance of the complete alarm installation must be assessed separately.

Compatible Wired Alarm Systems

The DS-PDSKM-VG3 can connect to suitable wired alarm systems that support its power, alarm and supervision requirements.

Hikvision also lists this model as compatible with selected AX HYBRID PRO systems.

Compatibility must be confirmed for the exact control panel and configuration.

Ideal Applications

  • Safe Protection: Detecting qualifying physical attacks against suitable safe enclosures.
  • ATM Security: Seismic detection for appropriately designed ATM security installations.
  • Strongrooms: Monitoring suitable reinforced structures.
  • Vault Protection: Additional physical attack detection for compatible security designs.
  • Steel Enclosures: Monitoring vibration transmitted through suitable steel panels.
  • Concrete Structures: Protecting selected concrete walls and panels.
  • High-Security Commercial Premises: Advanced intrusion detection for selected protected assets.
  • Financial Institutions: Seismic detection as part of professionally designed security systems.
  • Retail Security: Protection of suitable high-value storage enclosures.
  • AX HYBRID PRO Installations: Wired seismic detection with compatible Hikvision hybrid alarm panels.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDSKM-VG3.

Product Type: Wired Seismic Detector.

Detection Method: G-sensor shock detection.

Detection Radius: Up to 5m.

Sensitivity: Eight DIP-switch levels.

Power: 9–16V DC.

Alarm Output: Normally closed.

Supervision: Supported EOL resistor configurations.

Housing: IK10 die-cast metal.

Installation Environment: Indoor.

Professional Installation: Strongly recommended.

Recommended Installation Procedure

  • Confirm that seismic detection is appropriate for the protected asset.
  • Review the official Hikvision installation documentation.
  • Identify the material and construction of the protected surface.
  • Assess the expected physical attack methods.
  • Determine the required detector quantity and positioning.
  • Do not assume that the maximum 5m radius applies to every surface.
  • Select a secure mounting location with effective mechanical coupling to the protected structure.
  • Confirm the mounting surface is suitable for the detector and installation method.
  • Use the mounting arrangement specified by Hikvision.
  • Plan the alarm cable route and detector power supply.
  • Use a suitable regulated 9–16V DC supply.
  • Confirm that the alarm panel supports the detector's normally closed output.
  • Determine whether separate alarm, fault and tamper monitoring is required.
  • Select the appropriate end-of-line resistor configuration.
  • Configure the resistor jumpers according to the manufacturer instructions.
  • Do not combine conflicting internal and external resistor arrangements.
  • Connect the alarm, fault and tamper terminals as required.
  • Check cable continuity and correct polarity.
  • Configure the alarm panel zone type and supervision settings.
  • Select an appropriate sensitivity level using the DIP switches.
  • Configure high-noise adaptation for the installation environment.
  • Enable or disable displacement detection as required.
  • Power the detector and check its LED indications.
  • Perform appropriate manufacturer-approved detection tests.
  • Verify the alarm relay changes state correctly.
  • Confirm alarm events are received by the connected control panel.
  • Test front and rear tamper protection.
  • Test fault reporting where configured.
  • Check that normal environmental vibrations do not cause unacceptable unwanted alarms.
  • Record the final DIP-switch and EOL resistor settings.
  • Complete commissioning and provide relevant documentation to the system owner.

Installation Notice: The DS-PDSKM-VG3 must be securely coupled to the protected surface. Incorrect mounting can significantly reduce detection performance.

Coverage Notice: The specified 5m radius is a maximum manufacturer rating. Effective coverage depends on the surface material, construction, mounting and attack characteristics.

Compatibility Notice: This detector is wired. It does not communicate directly using Hikvision Tri-X wireless technology.

Power Notice: Use a suitable 9–16V DC power supply. Do not connect the detector directly to 230V AC mains power.

Professional Security Notice: Seismic detection should form part of an appropriately designed intrusion alarm system and should not be relied upon as the sole security measure for a high-value asset.

Package Contents

  • 1 × Hikvision DS-PDSKM-VG3 Wired Seismic Detector

Package Contents Notice: Mounting accessories and printed documentation may vary by supplied packaging. The alarm control panel, power supply and installation cabling are sold separately unless otherwise specified.

Frequently Asked Questions

What is the Hikvision DS-PDSKM-VG3?

It is a wired seismic detector designed to identify shock and vibration associated with qualifying physical attacks against protected surfaces.

Is the DS-PDSKM-VG3 a vibration detector?

Yes. It uses a G-sensor to detect mechanical disturbances.

What is a seismic detector used for?

Seismic detectors are used to monitor suitable protected structures and enclosures for vibration associated with physical attack attempts.

Can it detect drilling?

It is designed to detect qualifying attack-related vibrations, which may include drilling activity depending on the installation and attack characteristics.

Can it detect hammering or impact attacks?

Yes. It is designed to detect qualifying shock and impact events transmitted through the protected surface.

Can it detect cutting attacks?

It may detect vibration associated with certain cutting attacks, depending on the material, tool and detector configuration.

What is the maximum detection radius?

Hikvision specifies up to 5 metres.

Does the detector always cover a 5m radius?

No. Actual coverage depends on the protected material, mounting quality and environmental conditions.

What detection technology does it use?

A high-quality G-sensor with digital processing.

How many sensitivity levels are available?

Eight.

How is sensitivity adjusted?

Using the detector's DIP switches.

Can sensitivity be adjusted for different surfaces?

Yes. Hikvision provides different sensitivity settings for selected materials and applications.

Can it be used on a steel safe?

Yes, where the protected surface and installation meet the manufacturer's requirements.

Can it be used on concrete?

Yes. The manufacturer provides example sensitivity settings for concrete structures.

Can it protect an ATM?

Yes. ATM protection is one of the applications addressed in Hikvision's installation guidance.

Can it be used in a strongroom?

It may be suitable for an appropriately designed strongroom security installation.

What is digital background-noise filtering?

It is signal processing designed to help distinguish relevant attack-related vibration from ordinary background disturbances.

Does the detector support high-noise environments?

It includes configurable high-noise adaptation.

What is gross attack override?

It is a detection feature intended to assist recognition of significant physical attack events.

Does the detector support displacement detection?

Yes. The displacement alarm can be enabled or disabled through a DIP switch.

Does it have tamper protection?

Yes. Front and rear tamper protection are supported.

Is the DS-PDSKM-VG3 wireless?

No. It is a wired detector.

Can it connect to Hikvision AX HYBRID PRO?

Yes. Hikvision lists it as compatible with selected AX HYBRID PRO systems. Confirm the exact panel model before installation.

Does it work with Hikvision AX PRO wireless hubs?

It does not connect directly using AX PRO wireless communication. Integration would require suitable compatible wired input equipment and system support.

Can it connect to a third-party alarm panel?

It may connect to suitable third-party wired alarm panels that support its power, alarm output and supervision requirements.

What alarm output does it use?

A normally closed wired alarm output.

Does it have separate tamper and fault outputs?

Yes. The detector provides separate alarm, tamper and fault connections.

Does it support end-of-line resistors?

Yes. It includes selectable EOL resistor arrangements.

Can it support double end-of-line wiring?

Yes. The manufacturer documents double end-of-line wiring.

Can it support triple end-of-line wiring?

Yes. Triple end-of-line wiring is documented, subject to the connected alarm panel's capabilities.

What power supply does it require?

9–16V DC.

What is the nominal operating voltage?

12V DC.

How much current does it consume?

Up to 17mA.

Does the detector use batteries?

No battery power source is specified. It requires an external DC supply.

Does it include an LED indicator?

Yes. Blue indicates alarm events and red provides noise indication.

What does the blue LED indicate?

An alarm event.

What does the red LED indicate?

Background-noise intensity.

Is the detector suitable for outdoor installation?

No. Hikvision specifies indoor use.

What is the operating temperature range?

-40°C to +70°C.

What is the housing made from?

Die-cast metal.

What is the impact resistance rating?

IK10.

What are the detector dimensions?

60 × 80 × 19.5mm.

How much does the detector weigh?

Approximately 226g.

Is it a Grade 3 security detector?

Hikvision's user manual identifies EN 50131-2-8:2016 Security Grade 3.

Does Grade 3 mean the entire alarm system is Grade 3?

No. The complete installation must independently satisfy the applicable system requirements.

Does it detect people walking through a room?

It is designed for seismic and shock detection, not conventional room motion detection.

Does it have a built-in camera?

No.

Does it record video?

No.

Does it include a built-in siren?

No integrated audible siren is specified.

Does it require professional installation?

Yes. Professional installation is strongly recommended because mounting, sensitivity and wiring configuration directly affect performance.

Can I install multiple seismic detectors?

Yes, provided the alarm panel has suitable wired inputs and the installation is professionally designed.

Can the detector provide smartphone notifications?

Notifications depend on the connected alarm panel, its communications capabilities and system configuration.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and professional product support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDSKM-VG3 in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment and accessories with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision seismic detectors, wired alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDSKM-VG3 datasheet and user manual for complete seismic detection specifications, sensitivity settings, wiring configurations, EOL resistor values and installation instructions.

Download Official Hikvision DS-PDSKM-VG3 Datasheet (PDF)

Download Official Hikvision DS-PDSKM-VG3 User Manual (PDF)

Important: The DS-PDSKM-VG3 is a wired seismic detector using G-sensor shock detection. Hikvision specifies up to 5m detection radius, eight DIP-switch sensitivity levels, front/rear tamper protection, normally closed alarm output, 9–16V DC power and an IK10-rated die-cast metal housing. Effective detection depends on correct mechanical mounting, surface characteristics and professional commissioning. This product is designed for indoor installation.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch