Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDSMK-S-WB AX PRO Wireless Photoelectric Smoke Detector – 433MHz

Original price $75.00 - Original price $75.00
Original price
$75.00
$75.00 - $75.00
Current price $75.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDSMK-S-WB AX PRO Wireless Photoelectric Smoke Detector – 433MHz

The Hikvision DS-PDSMK-S-WB AX PRO Wireless Photoelectric Smoke Detector is a battery-powered smoke detection device designed to provide local audible warning and wireless smoke alarm reporting through compatible Hikvision AX PRO security systems.

Featuring an advanced photoelectric smoke sensing chamber, the DS-PDSMK-S-WB is designed to detect smoke particles entering its optical detection chamber.

When smoke is detected, the device can activate its built-in audible alarm and red LED indicator.

The detector features a powerful integrated buzzer rated at 85dB or higher at a distance of 3 metres, providing a local audible warning.

Unlike conventional standalone smoke detectors, the DS-PDSMK-S-WB also supports wireless alarm reporting through compatible Hikvision AX PRO control panels.

Its 433MHz two-way wireless communication allows supported alarm events and device information to be transmitted to the connected security system.

Hikvision specifies a wireless transmission distance of up to 800 metres in open areas.

Actual wireless communication range depends on building construction, installation location, interference and environmental conditions.

Wireless communication is protected using AES-128 encryption.

The detector supports convenient enrolment methods, including power-up registration, remote device ID and QR code registration.

The DS-PDSMK-S-WB features a Test/Hush button, allowing users to perform supported testing and temporarily silence the alarm according to the manufacturer's instructions.

Its compact circular housing measures just 102mm in diameter and 35mm in height, making it suitable for discreet indoor ceiling installation.

The detector operates using a non-replaceable CR17450 lithium battery, with a manufacturer-specified standby battery life of up to 10 years.

The sealed battery design eliminates routine user battery replacement. The detector must be replaced when its non-replaceable battery reaches the end of its service life or when otherwise required by the manufacturer.

With its combination of photoelectric smoke detection, local audible warning, encrypted wireless communication and long-life battery design, the DS-PDSMK-S-WB provides an additional smoke detection option for compatible Hikvision AX PRO security installations.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Australian Compliance Notice: Before installing this detector as a required smoke alarm, confirm that the exact model is certified to the applicable Australian Standard and meets the relevant state or territory building and fire safety requirements. Do not assume that compatibility with AX PRO establishes compliance with Australian residential smoke alarm legislation.

Hikvision DS-PDSMK-S-WB Wireless Smoke Detector Australian Warranty

Australian Warranty Support – Confirm the applicable warranty period and terms for this model with Civic Electronic.

Key Features

  • Genuine Hikvision AX PRO Device: Designed for compatible Hikvision wireless security systems.
  • Photoelectric Smoke Detection: Uses an optical smoke sensing chamber.
  • Independent Alarm Operation: Supports local smoke detection and audible warning.
  • Wireless Alarm Reporting: Communicates supported smoke alarm events to a compatible AX PRO control panel.
  • 433MHz Wireless Communication: Designed for compatible WB-series alarm equipment.
  • Two-Way RF Communication: Supports wireless communication with the compatible control panel.
  • Up to 800m Wireless Range: Manufacturer-specified open-area transmission distance.
  • AES-128 Encryption: Protects supported wireless communication.
  • Integrated Audible Alarm: Buzzer output of at least 85dB at 3 metres.
  • Red Alarm LED: Visual indication during supported alarm conditions.
  • Test/Hush Button: Supports local testing and alarm silencing according to manufacturer instructions.
  • Environmental Temperature Indication: Supported device feature.
  • Wireless Signal Strength Indication: Assists with installation and troubleshooting.
  • Multiple Enrolment Methods: Power-up, remote ID and QR code registration.
  • Battery-Powered Operation: No dedicated mains supply required for the detector.
  • Non-Replaceable Lithium Battery: Integrated CR17450 battery.
  • Up to 10-Year Standby Battery Life: Manufacturer-specified battery endurance.
  • Compact Ceiling-Mounted Design: 102mm diameter and 35mm height.
  • Indoor Installation: Designed for suitable protected indoor environments.
  • Professional System Integration: Suitable for compatible AX PRO alarm installations.

Technical Specifications

Brand Hikvision
Model DS-PDSMK-S-WB
Product Series AX PRO
Product Type Wireless Photoelectric Smoke Detector
Detection Method Photoelectric Smoke Sensing Chamber
Operating Mode Independent Alarm and Wireless Reporting
Audible Alarm ≥85dB at 3m
LED Indicator Red (Alarm)
Test/Hush Button Supported
Environmental Temperature Indication Supported
Signal Strength Indication Supported
Wireless Communication Two-Way RF
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 800m (Open Area)
Enrolment Methods Power-Up / Remote ID / QR Code
Power Supply Battery Powered
Battery Type 1 × CR17450, Non-Replaceable
Typical Voltage 3V DC
Specified Battery Life Up to 10 Years (Standby Conditions)
Operating Temperature -10°C to +60°C
Storage Temperature -20°C to +60°C
Operating Humidity 10%–90%
Dimensions Ø102 × 35mm
Weight 125g
Mounting Method Ceiling Mounting
Installation Environment Indoor
Compatible Platform Selected Hikvision AX PRO Alarm Control Panels
Australian Smoke Alarm Compliance Certification Must Be Confirmed Before Use as a Required Smoke Alarm

Detailed Features & Benefits

Photoelectric Smoke Detection Technology

The DS-PDSMK-S-WB uses a photoelectric smoke sensing chamber.

Photoelectric detection identifies smoke particles entering the sensing chamber by monitoring changes in light within the optical detection system.

This technology provides smoke detection without relying on a PIR motion sensor or heat-only detection method.

Independent Local Smoke Alarm

According to Hikvision's documentation, the detector supports independent alarm operation.

This allows the device to provide a local audible warning when smoke is detected.

Wireless reporting is an additional supported function when the detector is connected to a compatible AX PRO alarm system.

Powerful 85dB Audible Warning

The detector includes an integrated buzzer rated at 85dB or higher at a distance of 3 metres.

The audible warning helps alert nearby occupants when the detector enters its smoke alarm condition.

Red LED Alarm Indication

The DS-PDSMK-S-WB includes a red LED indicator for supported alarm conditions.

This provides a visible indication to complement the local audible warning.

Test and Hush Function

The detector includes a Test/Hush button.

The test function allows users to check supported detector operation according to Hikvision's instructions.

The hush function allows temporary silencing of supported alarm conditions.

Always investigate the cause of an alarm before using the hush function.

433MHz Wireless Alarm Reporting

The DS-PDSMK-S-WB communicates using 433MHz wireless technology.

This allows supported smoke alarm events to be reported to compatible Hikvision AX PRO control panels.

Wireless compatibility must be confirmed against the exact alarm panel model and firmware.

Two-Way Wireless Communication

The detector supports two-way RF communication.

This enables supported alarm and device information to be exchanged with the compatible AX PRO control panel.

Up to 800m Wireless Range

Hikvision specifies a maximum wireless transmission distance of 800 metres in open areas.

Actual range depends on building materials, interference, distance and installation conditions.

Wireless signal strength should be tested at the intended mounting position.

AES-128 Wireless Encryption

Supported wireless communication is protected using AES-128 encryption.

This helps secure communication between the detector and compatible alarm equipment.

Multiple Wireless Enrolment Methods

The detector supports power-up, remote device ID and QR code enrolment methods.

Available procedures depend on the compatible AX PRO control panel and configuration interface.

Non-Replaceable Long-Life Battery

The DS-PDSMK-S-WB operates using one non-replaceable CR17450 lithium battery.

Hikvision specifies battery endurance of up to 10 years under standby conditions.

The battery is not designed for user replacement.

When the battery reaches the end of its service life, follow Hikvision's instructions for replacing the detector.

Compact Ceiling-Mounted Design

The detector features a circular housing measuring 102mm in diameter and 35mm in height.

Its compact design is suitable for discreet indoor ceiling installation.

Environmental Temperature Indication

The DS-PDSMK-S-WB supports environmental temperature indication.

This is a supplementary device feature and does not make the detector a certified heat alarm.

Wireless Signal Strength Indication

The detector supports wireless signal strength indication.

This assists professional installers in confirming suitable wireless communication with the alarm control panel.

Indoor Smoke Detection Applications

The DS-PDSMK-S-WB is designed for indoor smoke detection applications.

It may provide supplementary smoke detection within compatible residential or commercial AX PRO installations.

Where smoke alarms are legally required, the installer must confirm that the selected product satisfies all applicable Australian certification and installation requirements.

Integration with AX PRO Security Systems

The detector can form part of a compatible Hikvision AX PRO installation.

Supported alarm reporting and notifications depend on the alarm control panel, firmware, communication connection and system configuration.

Professional Installation and Commissioning

Professional installation is recommended to ensure appropriate detector positioning, wireless registration and alarm testing.

Smoke detector placement must follow the manufacturer's instructions and applicable fire safety requirements.

Ideal Applications

  • AX PRO Alarm Systems: Adding compatible wireless smoke detection.
  • Residential Security Systems: Supplementary smoke detection where appropriate.
  • Commercial Security Systems: Additional smoke detection in suitable indoor areas.
  • Office Environments: Smoke alarm reporting through compatible AX PRO equipment.
  • Indoor Security Installations: Integrating smoke detection with supported alarm functions.
  • Security System Upgrades: Expanding compatible AX PRO installations.
  • Professional Alarm Installations: Photoelectric smoke detection with local audible warning.

Application Notice: Suitability for a particular location depends on the detector's certification, the relevant building requirements and the overall fire safety design.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDSMK-S-WB.

Detection Method: Photoelectric smoke sensing chamber.

Compatible Platform: Selected Hikvision AX PRO control panels.

Wireless Frequency: 433MHz.

Wireless Range: Up to 800m in open areas.

Audible Alarm: ≥85dB at 3m.

Battery: Non-replaceable CR17450.

Mounting: Indoor ceiling mounting.

Professional Installation: Recommended.

Recommended Installation Procedure

  • Confirm that the detector is suitable for the intended application.
  • Verify applicable Australian smoke alarm certification and building requirements.
  • Confirm compatibility with the exact AX PRO control panel.
  • Verify support for 433MHz WB-series equipment.
  • Review Hikvision's official installation instructions.
  • Select an appropriate indoor ceiling location.
  • Avoid unsuitable locations identified in the manufacturer's instructions.
  • Confirm adequate clearance from walls and other obstructions.
  • Check the wireless signal strength at the installation location.
  • Install the mounting base according to the manufacturer's instructions.
  • Activate the detector using the specified power switch procedure.
  • Register the detector with the compatible alarm control panel.
  • Confirm successful wireless enrolment.
  • Configure the supported smoke alarm reporting functions.
  • Perform the manufacturer's prescribed functional test.
  • Confirm the local audible alarm operates correctly.
  • Confirm the red LED alarm indication.
  • Verify that the control panel receives the expected alarm event.
  • Test configured notifications where applicable.
  • Confirm that the Test/Hush button operates as described by Hikvision.
  • Record the detector installation date.
  • Establish an appropriate maintenance and replacement schedule.

Important: Never use an unverified security-system smoke detector as a substitute for smoke alarms required by Australian building or fire safety legislation.

Battery Notice: The CR17450 battery is non-replaceable. Do not attempt to open or modify the sealed battery assembly.

Wireless Notice: Wireless alarm reporting depends on the compatible AX PRO control panel and successful communication. Local alarm operation and wireless reporting are separate functions.

Package Contents

  • 1 × Hikvision DS-PDSMK-S-WB Wireless Photoelectric Smoke Detector
  • Integrated Non-Replaceable CR17450 Battery

Package Contents Notice: Mounting hardware and printed documentation may vary by supplied packaging. The AX PRO alarm control panel is sold separately.

Frequently Asked Questions

What is the Hikvision DS-PDSMK-S-WB?

It is a wireless photoelectric smoke detector designed for compatible Hikvision AX PRO security systems.

What type of smoke detection does it use?

It uses a photoelectric smoke sensing chamber.

Does the detector have a built-in siren?

Yes. It includes an audible buzzer.

How loud is the alarm?

Hikvision specifies at least 85dB at 3 metres.

Does the detector have an LED indicator?

Yes. It features a red alarm LED.

Can the detector operate independently?

Yes. Hikvision specifies independent alarm operation and wireless reporting modes.

Does it require an AX PRO hub for local smoke detection?

The manufacturer specifies independent operation. A compatible AX PRO panel is required for supported wireless alarm reporting.

Does the detector support wireless alarm reporting?

Yes, through a compatible Hikvision AX PRO control panel.

What wireless frequency does it use?

433MHz.

Is it compatible with 868MHz AX PRO systems?

Compatibility must not be assumed. The DS-PDSMK-S-WB is the 433MHz version.

What is the maximum wireless range?

Up to 800 metres in open areas.

Will the wireless signal travel 800 metres through buildings?

Not necessarily. Walls, floors and other obstructions can reduce the communication range.

Is wireless communication encrypted?

Yes. AES-128 encryption is supported.

Does the detector support two-way wireless communication?

Yes.

How do I register the detector?

Supported methods include power-up, remote ID and QR code enrolment.

Does it include a Test/Hush button?

Yes. The detector includes a Test/Hush button.

Can I silence the alarm?

The hush function can temporarily silence supported alarm conditions. Always investigate the cause of an alarm before silencing it.

What battery does it use?

One non-replaceable CR17450 lithium battery.

Can I replace the battery?

No. Hikvision specifies a non-replaceable battery.

How long does the battery last?

Up to 10 years under the manufacturer's specified standby conditions.

Does a 10-year battery life mean a 10-year warranty?

No. Battery life and product warranty are separate matters.

Does the detector require mains power?

No. It is battery-powered.

What is the operating voltage?

3V DC.

Where should the detector be mounted?

It is designed for indoor ceiling mounting. Exact placement must follow the manufacturer's instructions and applicable fire safety requirements.

Can the detector be installed outdoors?

No. Hikvision specifies indoor applications.

What are the detector dimensions?

102mm diameter and 35mm height.

How much does it weigh?

Approximately 125g.

What is the operating temperature range?

-10°C to +60°C.

What is the operating humidity range?

10%–90% relative humidity.

Does the detector support environmental temperature indication?

Yes. This is listed as a supported feature.

Is it a heat detector?

No. Its specified smoke detection method is photoelectric sensing.

Does it detect carbon monoxide?

Carbon monoxide detection is not specified for this model.

Can it detect natural gas or LPG?

No gas detection capability is specified for this model.

Can it send smartphone notifications?

Supported notifications depend on the compatible AX PRO control panel, its connectivity and configuration.

Does it automatically contact the fire brigade?

No automatic emergency service dispatch is established by the detector specifications.

Can it replace my existing residential smoke alarms?

Only if the exact model is certified and approved for the intended installation under applicable Australian requirements. Compliance must be confirmed before replacement.

Is the DS-PDSMK-S-WB certified to AS 3786?

Australian Standard certification has not been established in this listing. Request appropriate certification documentation before using the product where AS 3786 compliance is required.

Does connecting it to AX PRO make it a compliant smoke alarm?

No. Wireless security system integration does not automatically establish compliance with Australian smoke alarm requirements.

Can it be used as supplementary smoke detection?

It may be suitable for supplementary detection in an appropriately designed installation, subject to applicable requirements.

Does it have a camera?

No. This model does not include a camera.

Does it record video?

No.

Does it require professional installation?

Professional installation is recommended, particularly where the detector is integrated into an AX PRO system.

Does Civic Electronic provide alarm monitoring for this product?

No. Civic Electronic supplies security equipment and technical product support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDSMK-S-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment and accessories with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO smoke detectors, wireless alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDSMK-S-WB datasheet and user manual for complete smoke detection specifications, wireless communication, alarm functions, battery information, installation requirements and testing procedures.

Download Official Hikvision DS-PDSMK-S-WB Datasheet (PDF)

Download Official Hikvision DS-PDSMK-S-WB User Manual (PDF)

Important: The DS-PDSMK-S-WB is a 433MHz wireless photoelectric smoke detector featuring a local audible alarm rated at 85dB or higher at 3m, AES-128 encrypted wireless communication and a non-replaceable CR17450 battery. Hikvision specifies up to 10 years of standby battery life. The device is designed for indoor ceiling mounting. Confirm Australian smoke alarm certification and installation compliance before using this product as a legally required smoke alarm.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch