Hikvision DS-PM1-I1-WB AX PRO Wireless Single Input Transmitter – 433MHz
The Hikvision DS-PM1-I1-WB AX PRO Wireless Single Input Transmitter is a compact, battery-powered security module designed to connect compatible third-party wired alarm detectors to supported Hikvision AX PRO wireless intrusion alarm systems.
Featuring one wired alarm input, one tamper input and one configurable anti-masking/output terminal, the DS-PM1-I1-WB provides a practical solution for integrating suitable wired security devices into a modern wireless alarm installation.
The transmitter operates using 433MHz two-way wireless communication, allowing a compatible wired detector to communicate with a supported AX PRO control panel without requiring a dedicated communication cable between the detector location and alarm hub.
This makes the DS-PM1-I1-WB particularly useful for professional alarm upgrades where an existing wired detector can be retained and integrated into a compatible wireless security system.
The module supports connection of suitable wired alarm devices, including compatible PIR motion detectors, magnetic contacts and other third-party intrusion detection equipment.
Detector compatibility depends on the connected device's alarm signalling, tamper connections and electrical requirements.
The DS-PM1-I1-WB provides a dedicated tamper input, allowing supported tamper conditions to be communicated to the compatible alarm system.
It also includes one configurable AM/Output terminal, which supports anti-masking or output functions according to the manufacturer's wiring instructions and system configuration.
For compatible low-power peripherals, the transmitter provides a 3.3V DC auxiliary power output rated at up to 10mA.
Important: The 3.3V auxiliary output is intended only for suitable low-power equipment. It is not a 12V detector power supply and cannot directly power conventional 12V PIR detectors.
The transmitter uses three CR123 batteries and offers a manufacturer-specified battery life of up to 5 years in standby conditions.
Actual battery life depends on operating conditions, detector activity, wireless communication quality and any connected auxiliary load.
Using Hikvision's 433MHz wireless technology, the DS-PM1-I1-WB supports a manufacturer-specified communication range of up to 1,300 metres in open areas.
Actual wireless range depends on building construction, installation location, interference and the compatible AX PRO control panel.
The device features three LED status indicators for alarm/tamper conditions, fault information and wireless signal strength.
These indicators assist professional security installers during device registration, commissioning and troubleshooting.
With compact dimensions of 102 × 41 × 20mm, the DS-PM1-I1-WB is designed for installation inside a suitable wireless-ready detector enclosure.
The transmitter weighs approximately 35g without batteries and 90g with batteries.
Its operating temperature range of -10°C to +55°C makes it suitable for protected installation environments that meet the manufacturer's operating requirements.
The Hikvision DS-PM1-I1-WB is an effective solution for professional installers who need to connect a suitable existing wired detector to a compatible AX PRO wireless security system.
Typical applications include residential alarm upgrades, commercial intrusion detection, detector replacement projects and professional security system integration.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Product Notice: This listing is for the DS-PM1-I1-WB transmitter only. The AX PRO control panel, external wired detector, installation materials and monitoring services are not included unless separately specified. Confirm battery inclusion against the supplied product packaging.
2-Year Australian Warranty on eligible Hikvision alarm equipment supplied by Civic Electronic, subject to applicable warranty terms.
Key Features
- Genuine Hikvision AX PRO Transmitter: Designed for compatible Hikvision wireless intrusion alarm systems.
- Single Wired Alarm Input: Connects one compatible wired alarm detection circuit.
- Dedicated Tamper Input: Supports compatible detector tamper signalling.
- Configurable AM/Output Terminal: Supports anti-masking or output functions according to the system configuration.
- 433MHz Wireless Communication: Designed for compatible AX PRO WB-series equipment.
- Two-Way Wireless Communication: Supports bidirectional communication with a compatible alarm control panel.
- Up to 1,300m Wireless Range: Manufacturer-specified open-area communication distance.
- 2GFSK Modulation: Supported wireless communication modulation.
- Wired-to-Wireless Integration: Helps connect compatible wired detectors to AX PRO systems.
- Third-Party Detector Support: Designed for suitable external wired alarm devices.
- 3.3V Auxiliary Power Output: Supplies compatible low-power peripherals.
- 10mA Maximum Auxiliary Current: Suitable only for devices within the specified electrical rating.
- Battery Powered: Operates using three CR123 batteries.
- Up to 5-Year Battery Life: Manufacturer-specified standby battery life.
- Alarm/Tamper LED: Red indicator for supported alarm and tamper conditions.
- Fault LED: Amber indicator for device fault information.
- Wireless Signal LED: Green/red indicator for wireless signal information.
- Power Switch: Includes one power switch.
- Serial Interface: Includes one manufacturer-specified serial port.
- Compact Design: Measures 102 × 41 × 20mm.
- Lightweight Construction: Approximately 35g without batteries.
- Detector Enclosure Installation: Designed to fit inside a suitable wireless-ready detector.
- Professional Security Integration: Suitable for compatible residential and commercial alarm installations.
- 2-Year Australian Warranty: Subject to applicable warranty terms.
Technical Specifications
Detailed Features & Benefits
Single Wired Alarm Input
The Hikvision DS-PM1-I1-WB includes one dedicated wired alarm input for connecting a suitable external intrusion detector.
This allows a compatible wired detector to communicate with a supported AX PRO alarm system through the transmitter's wireless connection.
The connected detector must provide compatible alarm signalling and meet the manufacturer's electrical requirements.
Wired-to-Wireless Alarm Integration
The transmitter is designed to help integrate suitable third-party wired detectors into a Hikvision AX PRO wireless alarm installation.
This can be useful when upgrading an existing security system or retaining a compatible detector that is already installed.
Existing detector wiring and operation should be inspected and tested before integration.
433MHz Two-Way Wireless Communication
The DS-PM1-I1-WB communicates using 433MHz two-way wireless technology.
This allows supported alarm and device status information to be exchanged with a compatible AX PRO control panel.
The WB model must be matched to the correct wireless frequency and supported alarm system.
Up to 1,300m Open-Area Wireless Range
Hikvision specifies a maximum wireless transmission distance of up to 1,300 metres in open areas.
Actual wireless communication range depends on installation conditions, building materials, interference and alarm control panel placement.
Professional installers should verify wireless signal quality at the intended installation location.
Dedicated Tamper Input
The DS-PM1-I1-WB includes one dedicated tamper input.
This allows compatible detector tamper conditions to be communicated to the supported alarm control panel.
Correct wiring and configuration are required for reliable tamper detection.
Configurable Anti-Masking / Output Terminal
The transmitter includes one configurable AM/Output terminal.
This supports anti-masking or output functionality according to the connected equipment and manufacturer's supported configuration.
Installers must confirm the correct wiring and electrical limitations before using this connection.
3.3V Auxiliary Power Output
The DS-PM1-I1-WB provides one nominal 3.3V DC auxiliary power output.
The manufacturer specifies a maximum output current of 10mA.
This output is intended for compatible low-power peripheral equipment only.
It must not be used as a substitute for a conventional 12V alarm detector power supply.
Three CR123 Batteries
The transmitter operates using three CR123 batteries.
Its battery-powered design eliminates the need for a dedicated mains power supply at the transmitter location.
Battery installation and replacement must follow the manufacturer's instructions.
Up to 5-Year Standby Battery Life
The manufacturer specifies a battery life of up to five years under standby conditions.
Actual battery life depends on alarm activity, wireless communication conditions, ambient temperature and any connected auxiliary load.
Low Quiescent Current
The DS-PM1-I1-WB has a manufacturer-specified quiescent current of approximately 40.29µA.
Its maximum current consumption is specified as 47.85mA.
These specifications support the transmitter's low-power battery-operated design.
Alarm and Tamper LED Indicator
The transmitter includes a red LED indicator for alarm and tamper conditions.
This provides useful visual information during installation and testing.
Fault LED Indicator
An amber LED indicator provides fault information.
This assists professional installers when diagnosing supported device conditions.
Wireless Signal Indicator
The DS-PM1-I1-WB includes a green/red wireless signal indicator.
This helps installers assess communication status during registration and commissioning.
Compact Detector Enclosure Installation
The transmitter measures 102 × 41 × 20mm.
Hikvision specifies installation inside a suitable wireless-ready detector enclosure.
Installers must confirm sufficient internal space, appropriate mounting arrangements and suitable electrical connections.
Residential Security Upgrades
The DS-PM1-I1-WB can be used in compatible residential AX PRO installations where a suitable existing wired detector needs to be retained.
This can help simplify certain alarm upgrade projects without replacing every compatible detection device.
Commercial Security Integration
The transmitter may also be used in compatible commercial security installations.
Applications include integrating suitable existing wired detectors into a supported AX PRO alarm system.
2-Year Australian Warranty
The Hikvision DS-PM1-I1-WB supplied by Civic Electronic includes a 2-year Australian warranty, subject to applicable warranty terms.
Ideal Applications
- AX PRO Alarm Systems: Integration of a compatible wired detector into a supported wireless alarm system.
- Residential Alarm Upgrades: Retaining suitable existing wired detection equipment.
- Commercial Security: Connecting compatible third-party wired detectors.
- Wired PIR Integration: Suitable PIR detectors with compatible signalling and power arrangements.
- Magnetic Contact Integration: Connecting compatible wired door or window contacts.
- Anti-Masking Detector Integration: Supported applications using the configurable AM terminal.
- Alarm System Modernisation: Introducing AX PRO wireless communication to suitable wired detection equipment.
- Single-Zone Expansion: Adding one compatible wired alarm input.
- Professional Security Installers: Wired-to-wireless detector integration projects.
Compatibility & Installation
Manufacturer: Hikvision.
Model: DS-PM1-I1-WB.
Product Type: Wireless Single Input Transmitter.
Compatible Platform: Selected Hikvision AX PRO control panels.
Wireless Frequency: 433MHz.
Wireless Communication: Two-way.
Wireless Range: Up to 1,300m in open areas.
Wired Alarm Input: One.
Tamper Input: One.
AM/Output Terminal: One configurable connection.
Auxiliary Power: 3.3V DC nominal, maximum 10mA.
Battery Requirement: Three CR123 batteries.
Installation: Inside a suitable wireless-ready detector enclosure.
Professional Installation: Recommended.
Recommended Installation Procedure
- Confirm compatibility with the exact Hikvision AX PRO control panel.
- Verify that the control panel supports 433MHz WB-series wireless equipment.
- Check the required control panel firmware and device capacity.
- Review the official Hikvision DS-PM1-I1-WB installation manual.
- Identify the wired detector to be connected.
- Confirm the detector's alarm signalling and tamper wiring requirements.
- Verify whether the detector requires an external power supply.
- Do not connect a conventional 12V detector to the transmitter's 3.3V auxiliary output.
- Confirm that any connected 3.3V peripheral draws no more than 10mA.
- Inspect existing detector wiring and terminals.
- Confirm that the selected detector enclosure provides sufficient internal space.
- Select a suitable protected installation location.
- Check the expected wireless communication path to the alarm control panel.
- Install the transmitter according to the manufacturer's mounting instructions.
- Connect the detector's alarm circuit to the appropriate input terminals.
- Connect the tamper circuit where required.
- Configure the AM/Output connection only where supported.
- Install the required CR123 batteries according to the manufacturer's instructions.
- Verify battery polarity and secure connections.
- Switch on the transmitter.
- Register the transmitter with the compatible AX PRO control panel.
- Confirm successful wireless registration.
- Configure the required alarm zone type.
- Configure supported tamper and anti-masking functions where applicable.
- Check wireless signal strength.
- Test the connected wired detector.
- Verify alarm reporting to the AX PRO control panel.
- Test the tamper input where connected.
- Verify supported fault reporting.
- Secure the detector enclosure.
- Complete final alarm system commissioning.
Compatibility Notice: The DS-PM1-I1-WB operates on 433MHz. Compatibility with 868MHz AX PRO equipment must not be assumed.
Detector Power Notice: The transmitter provides only a 3.3V auxiliary output rated at 10mA. Detectors requiring higher voltage or current need an appropriate separately designed power arrangement.
Installation Notice: Hikvision specifies installation inside a suitable wireless-ready detector. Confirm enclosure dimensions, wiring requirements and wireless performance before installation.
Package Contents
- 1 × Hikvision DS-PM1-I1-WB AX PRO Wireless Single Input Transmitter
Package Contents Notice: This listing is for the wireless transmitter only. The AX PRO alarm control panel, external wired detector and installation materials are not included unless separately specified. Confirm whether CR123 batteries and any accessories are supplied with the packaged product.
Frequently Asked Questions
What is the Hikvision DS-PM1-I1-WB?
It is a wireless single input transmitter designed to connect a suitable wired detector to a compatible Hikvision AX PRO alarm system.
What does a single input transmitter do?
It converts supported wired detector alarm signals into wireless communication for a compatible alarm control panel.
How many wired alarm inputs does it provide?
One dedicated wired alarm input.
Does the DS-PM1-I1-WB have a tamper input?
Yes. It includes one dedicated tamper input.
Does it support anti-masking?
It includes a configurable AM/Output terminal for supported anti-masking or output functions.
Is the transmitter compatible with AX PRO?
Yes. It is designed for compatible Hikvision AX PRO alarm systems.
Does it work with every AX PRO control panel?
Compatibility depends on the exact control panel model, wireless frequency and firmware.
What wireless frequency does it use?
433MHz.
Is it compatible with 868MHz AX PRO equipment?
Compatibility must not be assumed. The DS-PM1-I1-WB is the 433MHz version.
Does it support two-way wireless communication?
Yes. It supports two-way wireless communication.
What is the maximum wireless transmission range?
Up to 1,300 metres in open areas.
Will the wireless range be 1,300 metres inside a building?
Not necessarily. Walls, building materials and interference can significantly reduce the actual range.
Can I connect an existing wired alarm detector?
Yes, where the detector's electrical and signalling requirements are compatible.
Can I connect a wired PIR detector?
Yes, if its alarm output is compatible and its power requirements are met separately where necessary.
Can the transmitter power a 12V PIR detector?
No. Its auxiliary power output is rated at only 3.3V DC and 10mA.
Can I connect a magnetic door contact?
Yes. A suitable wired magnetic contact may be connected to the alarm input.
Can I connect a third-party wired detector?
Yes. The transmitter is designed for integration with suitable third-party wired alarm detectors.
Does the transmitter provide an auxiliary power output?
Yes. It provides one nominal 3.3V DC output rated at up to 10mA.
What is the maximum auxiliary output current?
10mA.
Does the transmitter require mains power?
No. It operates using three CR123 batteries.
How many batteries does it require?
Three CR123 batteries.
What is the expected battery life?
Up to five years under the manufacturer's specified standby conditions. Actual life varies with usage.
Are batteries included?
Battery inclusion should be confirmed against the supplied product packaging.
What is the quiescent current?
Approximately 40.29µA.
What is the maximum current consumption?
Approximately 47.85mA.
Does the transmitter include LED indicators?
Yes. It includes three LED indicators.
What does the red LED indicate?
The red LED is used for supported alarm and tamper indications.
What does the amber LED indicate?
The amber LED provides fault information.
What does the green/red LED indicate?
It provides wireless signal information.
Does it include a power switch?
Yes. It includes one power switch.
Does it include a serial port?
Yes. The manufacturer specifies one serial port.
Can the transmitter work without an AX PRO control panel?
Its intended wireless alarm integration functions require a compatible AX PRO control panel.
Can it connect more than one alarm zone?
No. It provides one dedicated wired alarm input. Its separate tamper and configurable AM/Output terminals have different functions.
Can I use it to upgrade an older alarm system?
Yes. It can help retain a suitable existing wired detector when upgrading to a compatible AX PRO system.
Where should the transmitter be installed?
Hikvision specifies installation inside a suitable wireless-ready detector enclosure.
Can it be installed outdoors?
Outdoor suitability should not be assumed. The transmitter must be protected within an enclosure appropriate for the installation environment.
What are the dimensions?
102 × 41 × 20mm.
How much does it weigh?
Approximately 35g without batteries and 90g with batteries.
What is the operating temperature range?
-10°C to +55°C.
What is the operating humidity range?
10% to 90% relative humidity.
Does it include an AX PRO alarm hub?
No. The alarm control panel is sold separately.
Does it include an external wired detector?
No. External wired detectors must be purchased separately unless otherwise specified.
Does the transmitter provide alarm monitoring?
No. It provides wired detector integration with a compatible alarm system. Professional alarm monitoring is a separate service.
Is professional installation recommended?
Yes. Professional installation is recommended to ensure correct detector wiring, power compatibility and wireless alarm configuration.
What warranty applies to the DS-PM1-I1-WB?
The product includes a 2-year Australian warranty through Civic Electronic, subject to applicable terms.
Where can I buy the Hikvision DS-PM1-I1-WB in Australia?
Civic Electronic supplies genuine Australian Hikvision AX PRO alarm equipment and accessories with professional installer and trade support.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.
- Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
- Hikvision Training Centre: Professional product knowledge and installer training.
- 2-Year Australian Warranty: Warranty support for eligible Hikvision alarm equipment.
- Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
- Technical Support: Assistance with compatible Hikvision equipment selection.
- Professional Installer Support: Support for security technicians and system integrators.
- Australia-Wide Delivery: Shipping available throughout Australia.
- Free Standard Shipping: Available on eligible orders of $300 or more.
- 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For Hikvision AX PRO wireless alarm systems, single input transmitters and professional installer support, contact Civic Electronic on 1300 024 842.
Official Hikvision Manufacturer Documentation
Review the official Hikvision DS-PM1-I1-WB documentation for complete wireless specifications, alarm and tamper inputs, auxiliary power limits, battery requirements, dimensions and installation instructions.
Download Official Hikvision DS-PM1-I1-WB Datasheet (PDF)
Download Official Hikvision DS-PM1-I1-WB User Manual (PDF)
Important: The DS-PM1-I1-WB is a 433MHz wireless single input transmitter designed for compatible AX PRO alarm control panels. It provides one wired alarm input, one tamper input, one configurable AM/Output terminal and a 3.3V auxiliary output rated at a maximum of 10mA. It operates using three CR123 batteries. Confirm panel compatibility, detector power requirements and installation conditions before purchasing.
Genuine Product Assurance, We are officially an authorized reseller of Hikvision
Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.
Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.
1. Free and Express Shipping
- Free Standard Shipping applies to all orders valued at $300 or more.
- Express Shipping is available for an additional $65 per order.
Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:
2. Order Processing
- Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
- Orders are processed Monday to Friday, excluding weekends and public holidays.
- Tracking information will be provided via email after 11:00 AM on the day the order is shipped.
All orders are dispatched using the most efficient postage method available to ensure timely delivery.
3. Delivery Timeframes
- Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
- Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
- Standard Shipping: Please allow up to 10 business days from dispatch.
If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.
4. Delivery Requirements and Limitations
- All deliveries require a signature upon receipt.
- Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
- If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
- We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.
Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.
We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.
If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.
5. Tracking Your Order
Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.
To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.
6. Additional Information
We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.
Price Beat Guarantee
At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.
How It Works
If you find a cheaper price, simply:
- Provide a link to the competitor's advertised product
- Confirm the seller is an authorised Australian reseller
- Submit your request before placing your order
Our team will verify the details and respond promptly.
Eligibility Requirements
To qualify for our Price Beat Guarantee, the following conditions must be met:
- The competitor must be an authorised Australian reseller
- The seller must operate as a legitimate Australian retail business
- The item must be identical (same brand, model number and specifications)
- The product must be brand new and currently in stock
- The price must be publicly advertised (not a private quote or member-only offer)
- The advertised price must include GST
- Shipping costs must be included in the total comparison
- The competitor must supply Australian warranty support
Exclusions
Our Price Beat Guarantee does not apply to:
- Dropshippers or intermediary sellers who do not physically stock the product
- Sellers operating without a verifiable Australian retail presence
- Businesses with no registered retail location or identifiable trading address
- Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
- Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
- Refurbished, used or open-box items
- Pricing errors or misprints
- Bundle deals, bonus offers or cashback promotions
- Trade, bulk or special contract pricing
Important Conditions
- Price Beat requests must be approved prior to purchase
- Approved offers are valid for 24 hours only
- Civic Electronic reserves the right to verify reseller authorisation status
- We reserve the right to decline requests that do not meet the above criteria
- This policy may be modified or withdrawn at any time without notice
Why Buy From Civic Electronic?
- 100% Genuine Products
- Authorised Australian Reseller
- Local Australian Warranty
- Real Stock, Not Dropshipped
- Expert Technical Support
- Fast & Secure Dispatch
Our Range of Accessories
Surveillance/CCTV Hard Drive for DVR/NVR 2TB
Western DigitalSurveillance Hard Drive for DVR/NVR 2TB Product brand is subject to change depending on stock availability. This product is supplied as an add-o...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 4TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 4TB Product brand is subject to change depending on stock availab...
View full detailsCAT6 Patch Lead Network Cable 20m
Cable AUCAT6 Patch Lead Network Cable Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmissio...
View full detailsCAT6 Patch Lead Network Cable 30m
Cable AUCAT6 Patch Lead Network Cable 30m Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmi...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 3TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 3TB Product brand is subject to change depending on stock availab...
View full details