HiLook HA-ALARM-KIT1 Wired Alarm Kit – IP Alarm Panel, 2 PIR Sensors, Keypad, Sirens & Backup Battery

Hikvision HiLook HA-ALARM-KIT1 Wired Alarm Kit with Sirens, PSU & Backup Battery

The Hikvision HiLook HA-ALARM-KIT1 Wired Alarm Kit is a comprehensive intrusion alarm package designed for professional installation in residential and small commercial properties.

Combining a HiLook AX Hybrid Pro alarm control panel, wired LCD keypad, two PIR motion detectors, indoor screamer, outdoor siren, 15V power supply and 12V 7Ah backup battery, this package provides the essential components for a professionally installed security alarm system.

Unlike basic alarm starter kits, this Civic Electronic package includes both internal and external audible alarm devices, together with the power supply and backup battery required for the intended installation.

The included alarm panel features eight onboard wired detection zones, allowing installers to connect compatible motion detectors, magnetic contacts and other supported wired security sensors.

For larger installations, the system supports expansion to up to 48 zones using compatible expansion equipment and system configurations.

The panel also provides four onboard outputs, comprising two relay outputs and two programmable I/O outputs, supporting suitable alarm signalling and auxiliary control applications.

Built-in IP network communication enables compatible remote system management and alarm notifications through supported Hikvision applications, subject to internet connectivity and correct configuration.

The supplied wired LCD keypad provides convenient access to everyday alarm functions, including arming, disarming, system status and installer programming.

Three included RFID proximity tags provide an alternative method of operating supported alarm functions through the compatible keypad.

Two wired PIR motion detectors provide motion detection coverage for selected internal areas such as living rooms, hallways, offices and retail spaces.

The indoor screamer provides local audible notification when activated by the correctly configured alarm system.

The included outdoor siren provides an additional external audible deterrent, helping draw attention to an alarm activation.

A supplied 15V DC power supply provides operating power for the system, while the included 12V 7Ah backup battery supports continued operation during suitable mains power interruptions.

The HA-ALARM-KIT1 is particularly suitable for new security installations, renovations and replacement projects where existing alarm wiring can be reused following professional inspection.

Its wired-first architecture provides a dependable foundation for security installations while supporting compatible expansion options where required.

HiLook is a Hikvision product brand, providing practical professional security equipment for residential and commercial applications.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: This package requires professional installation, alarm cabling, network configuration where applicable, and commissioning. Alarm monitoring services are not included. Compatibility with additional detectors and accessories must be confirmed before purchase.

Australian Warranty Support – Applicable warranty periods may vary between the alarm equipment, power supply, sirens and backup battery. Australian Consumer Law rights apply.

Key Features

• Complete Wired Alarm Package: Includes the alarm panel, keypad, detectors, sirens and power components.
• HiLook AX Hybrid Pro Platform: Professional wired-first intrusion alarm system.
• 8 Onboard Wired Zones: Connect compatible wired intrusion detectors.
• Expandable to 48 Zones: Supports larger installations with suitable expansion equipment.
• 4 Onboard Outputs: Two relay outputs and two programmable I/O outputs.
• Built-In IP Module: Supports compatible network communication and remote management.
• Wired LCD Keypad: Provides system operation, status information and programming access.
• 2 Wired PIR Detectors: Motion detection for selected internal areas.
• 3 RFID Tags: Convenient proximity-based alarm operation.
• Indoor Screamer: Local audible alarm notification.
• Outdoor Siren: External audible alarm deterrence.
• 15V DC Power Supply: Included for the alarm installation.
• 12V 7Ah Backup Battery: Provides backup power during suitable mains interruptions.
• Wired Detector Communication: Suitable for professional hardwired security installations.
• Multi-Area Capability: Supports up to 16 areas, subject to configuration.
• Compatible Mobile Applications: Supports remote alarm functions through approved Hikvision applications.
• Additional Detector Support: Expand with compatible wired security devices.
• Optional Communication Expansion: Supported cellular modules may be added separately.
• Professional Installation: Designed for trained security technicians.
• Residential & Commercial Applications: Suitable for homes, offices, shops and other premises.

Detailed Features & Benefits

Complete Wired Security Alarm Package

The HA-ALARM-KIT1 bundle combines the core alarm system with two PIR detectors, indoor and outdoor sounders, a power supply and backup battery. This reduces the need to source the main components individually.

8-Zone Wired Alarm Control Panel

The HiLook control panel provides eight onboard wired zones for compatible intrusion detectors. Each zone can be configured according to the installation requirements and supported panel functions.

Expandable to 48 Zones

Compatible expansion equipment allows the system to support up to 48 zones, making it suitable for installations that may require additional detectors in the future.

Built-In IP Communication

The alarm panel includes an IP communication interface for compatible network-based management and notifications. A suitable network connection and configuration are required.

Wired LCD Keypad

The included LCD keypad provides a central user interface for arming, disarming, checking alarm status and accessing supported programming functions.

Two Wired PIR Motion Detectors

The package includes two wired passive infrared motion detectors for monitoring selected internal areas. Detector placement and coverage should be determined during professional site assessment.

Three RFID Proximity Tags

Three included RFID tags support convenient alarm operation through the compatible keypad, subject to enrolment and system permissions.

Indoor Screamer

The indoor screamer provides local audible notification when the alarm system activates its configured internal sounder output.

Outdoor Siren

The external siren provides an audible deterrent outside the premises when connected and configured correctly.

15V DC Power Supply

The supplied power unit provides the required DC operating supply for the alarm panel. The power supply must be correctly installed and sized for the connected equipment.

12V 7Ah Backup Battery

The included backup battery supports alarm system operation during mains power interruptions. Actual backup duration depends on system load, battery condition and connected accessories.

Four Onboard Outputs

Two relay outputs and two programmable I/O outputs provide flexibility for supported alarm sounders, signalling and auxiliary control functions.

Multi-Area Alarm Configuration

The system supports multiple areas, allowing professional installers to configure suitable independent security sections within a property.

Compatible Mobile App Control

Supported Hikvision applications can provide remote alarm functions and notifications when the control panel is correctly configured and connected to a suitable network.

Wired Detector Reliability

Hardwired detectors communicate through installed alarm cabling, avoiding dependence on individual wireless detector batteries for the included PIR sensors.

Flexible Security Expansion

Additional compatible wired detectors, keypads and supported expansion modules may be added according to the alarm panel's specifications.

Suitable for Professional Retrofits

The system may be suitable for replacing older wired alarm panels where existing cables and devices have been inspected and confirmed compatible.

Ideal Applications

• Residential Homes: Wired intrusion detection with internal and external audible alarms.
• Townhouses: Professionally configured security for multiple internal areas.
• Retail Stores: Motion detection and audible alarm notification for business premises.
• Commercial Offices: Security monitoring for selected rooms, entrances and corridors.
• Small Warehouses: Wired alarm protection with expansion options.
• Showrooms: Intrusion detection for display and storage areas.
• Workshops: Alarm protection for suitable commercial environments.
• Alarm System Replacements: Upgrade older wired systems where existing cabling is suitable.
• New Construction: Wired alarm installation during building or renovation works.
• Professional Security Projects: Suitable for licensed security installers and system integrators.

Compatibility & Installation

The HA-ALARM-KIT1 is designed for professional installation using suitable alarm cabling and compatible security equipment.

The included alarm control panel supports eight onboard wired zones and can be expanded with compatible equipment.

Installers should assess the site, confirm detector locations, calculate power requirements and plan the wiring before commencing installation.

Recommended Installation Procedure

• Confirm the supplied components against the Civic Electronic package contents.
• Review the official Hikvision HiLook alarm wiring guide.
• Assess the property and identify the required detection areas.
• Prepare an alarm zone schedule.
• Confirm suitable mounting locations for the control panel and keypad.
• Plan cable routes for the two PIR motion detectors.
• Select appropriate indoor screamer and outdoor siren locations.
• Confirm the outdoor siren is suitable for its intended exposure conditions.
• Install the alarm panel in a protected location.
• Install the wired LCD keypad.
• Mount the PIR detectors according to their manufacturer instructions.
• Connect detectors using suitable alarm cable.
• Configure zone termination resistors according to Hikvision requirements.
• Connect the indoor screamer to the appropriate alarm output.
• Connect the outdoor siren according to its wiring instructions.
• Confirm the combined sounder load is within the panel's output ratings.
• Install the supplied 15V DC power supply safely.
• Connect the 12V 7Ah backup battery using correct polarity.
• Confirm the power supply meets the required charging and operating specifications.
• Connect the alarm panel to the network where IP functions are required.
• Configure the wired zones and detector types.
• Configure entry and exit delays where applicable.
• Configure the alarm sounder outputs.
• Enrol the three RFID tags.
• Configure authorised users and access permissions.
• Configure supported application access if required.
• Walk-test both PIR detectors.
• Test keypad arming and disarming.
• Test each RFID tag.
• Test the indoor screamer.
• Test the outdoor siren.
• Verify tamper detection where supported and connected.
• Perform a controlled mains power failure test.
• Confirm correct battery backup operation.
• Verify system restoration after mains power returns.
• Check alarm notifications where configured.
• Document the completed system configuration.
• Provide user training and complete professional handover.

Power Supply Notice: Hikvision's Australian wiring guide specifies a 14.3–15V DC, 2.5A supply when a 12V 7Ah backup battery is installed. Confirm that the supplied PSU and total system load meet these requirements.

Battery Notice: The supplied 12V 7Ah battery provides backup power, but the operating duration is not fixed. It depends on battery condition, connected devices and total power consumption.

Wiring Notice: Alarm cable, network cable, conduit and additional installation materials are not included unless separately specified.

Detector Compatibility Notice: Additional detectors must be compatible with the control panel's zone configuration, power outputs and supported alarm functions.

Outdoor Siren Notice: Install the external siren according to its individual environmental rating and manufacturer instructions.

Network Notice: Remote application functions require a suitable internet connection and correct system configuration.

Monitoring Notice: This package does not include professional alarm monitoring or a monitoring subscription.

Professional Installation Notice: Installation should be completed by an appropriately licensed security technician. Any fixed mains electrical work must be carried out by an appropriately licensed electrician.

Package Contents

This Civic Electronic complete alarm package includes:

• 1 × HiLook Wired Alarm Control Panel with built-in IP communication module.
• 1 × HiLook Wired LCD Keypad for alarm operation and programming.
• 2 × HiLook Wired PIR Motion Detectors for indoor motion detection.
• 1 × 15V DC Power Supply Unit for the alarm system.
• 1 × 12V 7Ah Backup Battery for operation during suitable power interruptions.
• 1 × Indoor Screamer for internal audible alarm notification.
• 1 × Outdoor Siren for external audible alarm notification.
• 3 × RFID Proximity Tags for convenient system operation.

Package Contents Notice: This listing describes Civic Electronic's complete HA-ALARM-KIT1 bundle, not the manufacturer's basic starter package. Exact accessory brands, models and mounting materials should be confirmed against the supplied order. Alarm cabling and installation services are not included unless expressly specified.

Frequently Asked Questions

What is the HiLook HA-ALARM-KIT1?

It is a wired-first hybrid intrusion alarm system designed for residential and small commercial security installations.

Is this a complete alarm kit?

Yes. This Civic Electronic package includes the alarm panel, keypad, two PIR detectors, three RFID tags, indoor screamer, outdoor siren, power supply and backup battery.

Does the kit include an alarm panel?

Yes, one HiLook alarm control panel with built-in IP communication.

How many wired zones does the panel have?

Eight onboard wired zones.

Can the system be expanded?

Yes. It supports up to 48 zones with compatible expansion equipment.

How many areas does the system support?

Up to 16 areas, subject to system configuration.

Does the panel have programmable outputs?

Yes. It provides four onboard outputs, comprising two relay outputs and two programmable I/O outputs.

Does the kit include a keypad?

Yes, one wired LCD keypad.

Can the keypad arm and disarm the alarm?

Yes, when correctly configured.

Does the kit include RFID tags?

Yes, three RFID proximity tags.

Can RFID tags be used instead of a PIN?

Supported alarm functions can be operated using enrolled RFID tags through the compatible keypad.

How many PIR detectors are included?

Two wired PIR motion detectors.

What do the PIR detectors do?

They detect movement within their configured detection areas and report alarm events to the control panel.

Can additional PIR detectors be installed?

Yes, subject to available zones, power capacity and device compatibility.

Can I add wired magnetic door contacts?

Yes, compatible wired magnetic contacts can be connected to suitable alarm zones.

Can I add glass break detectors?

Compatible wired glass break detectors may be added where supported by the system.

Can I add smoke detectors?

Only compatible detectors installed and configured in accordance with the manufacturer's instructions and applicable fire safety requirements.

Does the kit include an indoor siren?

Yes, one indoor screamer.

Does the kit include an outdoor siren?

Yes, one outdoor siren.

Do the sirens activate when an alarm is triggered?

Yes, when connected to the appropriate outputs and correctly configured.

Does the kit include a power supply?

Yes, one 15V DC power supply.

Does the kit include a backup battery?

Yes, one 12V 7Ah backup battery.

Will the alarm work during a power outage?

The battery can maintain operation during a power interruption while sufficient charge remains and the system load is within the supported limits.

How long will the backup battery last?

Actual backup duration depends on the system's electrical load, battery condition and operating conditions.

Is this a wired or wireless alarm system?

It is a wired-first hybrid alarm system. The supplied PIR detectors and keypad are wired.

Does the system support wireless expansion?

Compatible wireless expansion may be supported, depending on the panel, receiver and accessory configuration.

Does the alarm panel include an IP module?

Yes, it has built-in IP communication.

Can I connect the alarm to my router?

Yes, using a suitable Ethernet connection and correct network configuration.

Can I control the alarm using a smartphone?

Supported remote functions are available through compatible Hikvision applications when correctly configured.

Can I receive alarm notifications on my phone?

Yes, where the required application, network connection and notification settings are supported and configured.

Does the system require internet access to detect intrusions?

Local wired intrusion detection does not depend on an internet connection. Remote application functions require suitable connectivity.

Does the kit include a SIM card or cellular module?

No cellular module or SIM card is specified as part of this package.

Can I add a cellular communication module?

Compatible communication modules may be available separately, subject to the panel's specifications.

Is professional monitoring included?

No. Professional alarm monitoring is not included.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic no longer provides alarm monitoring services.

Can the system be used in a house?

Yes.

Can it be used in a retail store?

Yes, where the system is suitable for the site's security requirements.

Can it be used in an office?

Yes.

Can it be used in a warehouse?

Yes, subject to the required detector coverage and system design.

Can I reuse existing alarm wiring?

Potentially. A professional installer should inspect the existing cables and confirm they are suitable.

Can I replace an older alarm panel with this kit?

Yes, where the installation requirements and existing wiring are suitable.

Are alarm cables included?

No alarm cabling is specified as included in this package.

Is installation included?

No. Installation is not included unless separately arranged.

Does the system require professional installation?

Professional installation is recommended to ensure correct wiring, detector placement, power supply configuration and alarm commissioning.

What is the difference between the basic HA-ALARM-KIT1 and this package?

The basic starter kit generally includes the panel, keypad, two PIR detectors and three RFID tags. This Civic Electronic bundle additionally includes an indoor screamer, outdoor siren, 15V power supply and 12V 7Ah battery.

Where can I buy the HiLook HA-ALARM-KIT1 in Australia?

Civic Electronic supplies genuine Australian HiLook and Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including wired alarm systems, wireless alarms, CCTV, video intercoms, access control and professional security accessories.

• Authorised Hikvision Sales Partner: Genuine Australian Hikvision and HiLook equipment.
• Hikvision Training Centre: Professional product knowledge and installer training.
• Australian Warranty Support: Warranty assistance for eligible products.
• Competitive Trade Pricing: Wholesale opportunities for eligible professional installers.
• Technical Support: Assistance selecting compatible alarm equipment.
• Professional Installer Support: Support for security technicians and system integrators.
• Australia-Wide Delivery: Shipping available throughout Australia.
• Free Standard Shipping: Available on eligible orders of $300 or more.
• 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For HiLook wired alarm kits, compatible accessories and professional installer support, contact Civic Electronic on 1300 024 842.

Showroom: Unit 16, 2 Money Close, Rouse Hill NSW 2155.