Hikvision HiLook HA-ALARM-BKT Hybrid Alarm PIR Mounting Bracket
The Hikvision HiLook HA-ALARM-BKT Hybrid Alarm PIR Bracket is a mounting accessory designed for compatible HiLook wired PIR motion detectors used in professional intrusion alarm installations.
Part of the HiLook AX Hybrid Pro alarm accessory range, this bracket provides a practical mounting solution for suitable motion detectors in residential and commercial security applications.
Correct PIR detector positioning is essential for effective intrusion detection. The HA-ALARM-BKT assists professional installers in positioning compatible detectors according to the security requirements and layout of the premises.
The bracket is suitable for use in compatible HiLook alarm installations, including systems built around the HA-ALARM-P48 Hybrid Alarm Control Panel.
Hikvision lists the HA-ALARM-BKT alongside its HA-ALARM-PIR1 wired PIR detector and HA-ALARM-PIR2 wired dual-technology detector.
The bracket is particularly useful for installations requiring an alternative mounting arrangement to direct detector mounting.
It may be used in suitable residential properties, retail stores, offices, workshops and other commercial premises.
Professional installers should select the mounting location according to the detector's specified detection pattern, installation height and environmental requirements.
Detector compatibility and any available mounting adjustments should be confirmed before installation.
The HA-ALARM-BKT is a mechanical mounting accessory and does not require an electrical power supply or alarm system programming.
HiLook is a Hikvision product brand, offering professional security equipment and accessories for Australian security installations.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Important: This product is a PIR mounting bracket only. The PIR motion detector, alarm control panel, cabling and installation services are not included.
Australian Accessories Warranty – Subject to applicable product warranty terms and Australian Consumer Law.
Key Features
-
Genuine HiLook Accessory: Official Hikvision HiLook alarm mounting bracket.
-
Model HA-ALARM-BKT: Dedicated PIR detector mounting accessory.
-
PIR Detector Mounting: Designed for compatible intrusion detection equipment.
-
Professional Installation: Suitable for security installers and alarm technicians.
-
HiLook Alarm Range: Listed alongside HiLook wired PIR and dual-technology detectors.
-
Alternative Mounting Solution: Provides an additional installation option where suitable.
-
Detector Positioning: Helps installers position compatible detectors for the intended coverage area.
-
Residential Applications: Suitable for compatible home alarm installations.
-
Commercial Applications: Suitable for offices, retail premises and workshops.
-
Alarm System Upgrades: Useful when relocating compatible PIR detectors.
-
Replacement Accessory: Suitable for replacing compatible mounting hardware.
-
No Electrical Connection: Mechanical mounting accessory requiring no power supply.
-
No Programming Required: The bracket itself does not require alarm configuration.
-
Professional Installer Support: Available through Civic Electronic.
Technical Specifications
| Brand |
HiLook by Hikvision |
| Model |
HA-ALARM-BKT |
| Product Name |
HiLook Hybrid Alarm PIR Bracket |
| Product Type |
PIR Detector Mounting Bracket |
| Product Category |
Intrusion Alarm Mounting Accessory |
| Alarm Product Range |
HiLook Hybrid Alarm |
| Primary Application |
Mounting Compatible PIR Motion Detectors |
| Associated Detector Range |
HiLook HA-ALARM-PIR1 / HA-ALARM-PIR2 |
| Detector Compatibility |
Confirm Mounting Interface Against Detector Model |
| Mounting Application |
Professional Detector Installation |
| Adjustment Range |
Not Published in Available Manufacturer Brochure |
| Bracket Dimensions |
Confirm Against Supplied Product |
| Material |
Confirm Against Manufacturer Specification |
| Colour |
Confirm Against Supplied Product |
| Power Supply |
Not Required |
| Alarm Wiring |
Not Required for Bracket |
| Programming |
Not Required for Bracket |
| PIR Detector Included |
No |
| Alarm Panel Included |
No |
| Recommended Installation |
Professional Security Installer |
Detailed Features & Benefits
Dedicated HiLook PIR Mounting Accessory
The HA-ALARM-BKT is identified in Hikvision's Australian HiLook product catalogue as a PIR bracket for the HiLook alarm equipment range.
Professional Detector Positioning
Correct detector placement is essential for achieving the intended PIR detection coverage. A suitable mounting bracket can provide additional installation flexibility compared with direct mounting.
Suitable for HiLook Alarm Installations
The bracket is part of the HiLook hybrid alarm accessory range and can be considered for compatible wired PIR detector installations.
HA-ALARM-PIR1 Applications
The HiLook HA-ALARM-PIR1 is a wired PIR motion detector listed in the same manufacturer alarm product range. Confirm the detector's mounting compatibility before installation.
HA-ALARM-PIR2 Applications
The HiLook HA-ALARM-PIR2 is a wired dual-technology detector listed alongside the bracket in Hikvision's HiLook alarm catalogue. Confirm the physical mounting interface before installation.
Residential Security Installations
The bracket is suitable for compatible PIR detector mounting applications in residential security systems.
Commercial Security Installations
Professional installers can use compatible PIR mounting accessories in offices, shops, workshops and other suitable commercial premises.
Alarm System Maintenance
The HA-ALARM-BKT may be used when replacing suitable existing detector mounting hardware or repositioning compatible detectors.
No Electrical Power Required
The bracket is a mechanical accessory and does not require a separate electrical power supply.
No Alarm Programming Required
The mounting bracket itself requires no programming. Any detector relocation should be followed by appropriate alarm testing and commissioning.
Genuine Hikvision HiLook Accessory
HiLook is a Hikvision product brand offering professional intrusion alarm equipment and installation accessories.
Ideal Applications
-
Residential Homes: Mounting compatible PIR detectors in suitable internal locations.
-
Townhouses: Professional alarm detector installations.
-
Retail Stores: PIR detector positioning for compatible intrusion alarm systems.
-
Commercial Offices: Suitable detector mounting applications.
-
Warehouses: Compatible motion detector mounting in protected locations.
-
Workshops: Professional alarm detector installation.
-
Alarm System Upgrades: Repositioning compatible PIR detectors.
-
Replacement Mounting Hardware: Replacing compatible detector brackets.
-
New Security Installations: Mounting accessories for compatible HiLook alarm detectors.
Compatibility & Installation
Manufacturer: Hikvision HiLook.
Model: HA-ALARM-BKT.
Product Type: PIR Detector Mounting Bracket.
Associated Product Range: HiLook Hybrid Alarm.
Associated Detector Models: HA-ALARM-PIR1 and HA-ALARM-PIR2.
Compatibility: Confirm the bracket's mounting interface against the exact PIR detector model before installation.
Recommended Installation Procedure
- Confirm the bracket model is HA-ALARM-BKT.
- Check compatibility with the intended PIR detector.
- Review the PIR detector's official installation instructions.
- Identify the required detection coverage.
- Select a suitable mounting location.
- Confirm the detector's recommended installation height.
- Check for obstructions within the detection area.
- Avoid unsuitable locations exposed to excessive heat or environmental interference.
- Confirm the mounting surface can support the detector and bracket.
- Inspect the bracket for damage before installation.
- Confirm the required mounting hardware is available.
- Position the bracket according to the detector's mounting requirements.
- Secure the bracket using appropriate fixings.
- Attach the compatible PIR detector according to its instructions.
- Ensure the detector is firmly mounted.
- Check that the detector's tamper protection operates correctly.
- Complete the detector wiring where applicable.
- Configure the connected alarm zone.
- Adjust the detector position only within the bracket's supported mechanical limits.
- Perform a complete detector walk test.
- Confirm the required detection coverage.
- Check for unwanted detection or blind spots.
- Verify the detector remains securely positioned.
- Complete professional commissioning.
Compatibility Notice: The HA-ALARM-BKT is listed in Hikvision's HiLook alarm range alongside the HA-ALARM-PIR1 and HA-ALARM-PIR2. Confirm physical mounting compatibility before installation.
Detector Coverage Notice: The bracket does not increase a PIR detector's rated detection distance or detection angle.
Mounting Notice: Follow the detector manufacturer's recommended mounting height and orientation.
Environmental Notice: Confirm that the selected mounting location is suitable for the detector's environmental rating.
Adjustment Notice: Do not force the bracket beyond its supported mechanical adjustment limits.
Installation Notice: Appropriate wall or ceiling fixings must be selected for the mounting surface.
Testing Notice: Perform a detector walk test after installation or repositioning.
Professional Installation Notice: Installation by a suitably qualified security technician is recommended.
Package Contents
- 1 × Hikvision HiLook HA-ALARM-BKT PIR Mounting Bracket
Package Contents Notice: This listing is for the PIR bracket only. A PIR motion detector, alarm control panel, cabling and installation services are not included. Confirm mounting screws and other hardware against the supplied packaging.
Frequently Asked Questions
What is the Hikvision HiLook HA-ALARM-BKT?
It is a PIR detector mounting bracket in Hikvision's HiLook alarm accessory range.
What is the model number?
HA-ALARM-BKT.
Is HiLook a Hikvision brand?
Yes. HiLook is a Hikvision product brand.
What is the bracket used for?
It provides a mounting solution for compatible PIR motion detectors.
Is it compatible with the HA-ALARM-PIR1?
The bracket and detector are listed in the same HiLook alarm product range. Confirm the mounting interface before installation.
Is it compatible with the HA-ALARM-PIR2?
The bracket and dual-technology detector are listed in the same HiLook alarm product range. Confirm the mounting interface before installation.
Does the bracket include a PIR detector?
No.
Does it include an alarm control panel?
No.
Does the bracket detect movement?
No. Motion detection is performed by a compatible PIR detector mounted separately.
Does it require power?
No.
Does it require alarm wiring?
The bracket itself does not require wiring. The installed detector may require wiring.
Does it require programming?
No. The bracket itself requires no programming.
Can the bracket improve detector positioning?
It can provide a suitable mounting option when compatible with the detector and installation requirements.
Does it increase PIR detection range?
No. Detection range is determined by the detector's specifications and installation conditions.
Can it be used in a house?
Yes, for compatible detector installations.
Can it be used in an office?
Yes.
Can it be used in a retail store?
Yes.
Can it be used in a warehouse?
Yes, where the detector and mounting arrangement are suitable.
Can it be installed outdoors?
Outdoor suitability has not been confirmed for this bracket. Follow the detector and bracket manufacturer's environmental requirements.
Is it suitable for all Hikvision PIR detectors?
Universal compatibility has not been established. Check the exact detector model before purchase.
Can it be used with wireless PIR detectors?
Only where the specific wireless detector's mounting interface is compatible.
Can it be used with dual-technology detectors?
Potentially, where the specific detector supports the bracket.
Does it include mounting screws?
Confirm the supplied mounting hardware against the product packaging.
Does it require a professional installer?
Professional installation is recommended to ensure correct detector placement and alarm coverage.
Can I use the bracket to relocate an existing PIR?
Yes, if the detector is compatible and the new location provides suitable detection coverage.
Should the PIR detector be tested after installation?
Yes. A complete walk test should be performed after mounting or repositioning.
Where can I buy the HiLook HA-ALARM-BKT in Australia?
Civic Electronic supplies genuine Australian Hikvision and HiLook alarm equipment and accessories.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We specialise in genuine Australian Hikvision and HiLook security products, including wired and hybrid alarm systems, CCTV equipment, video intercoms, access control and professional security accessories.
-
Authorised Hikvision Sales Partner: Genuine Australian Hikvision and HiLook equipment.
-
Hikvision Training Centre: Professional product knowledge and installer training.
-
Australian Warranty Support: Warranty assistance for eligible products.
-
Competitive Trade Pricing: Wholesale opportunities for eligible professional installers.
-
Technical Support: Assistance selecting compatible HiLook alarm accessories.
-
Professional Installer Support: Support for security technicians and system integrators.
-
Australia-Wide Delivery: Shipping available throughout Australia.
-
Free Standard Shipping: Available on eligible orders of $300 or more.
-
2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For HiLook HA-ALARM-BKT PIR brackets, HA-ALARM-PIR1 and HA-ALARM-PIR2 detectors, contact Civic Electronic on 1300 024 842.
Showroom: Unit 16, 2 Money Close, Rouse Hill NSW 2155.
Official Hikvision Manufacturer Documentation
Hikvision's official Australian HiLook alarm brochure identifies the HA-ALARM-BKT as a PIR mounting bracket in the HiLook alarm accessory range.
Download Official Hikvision HiLook Alarm Brochure (PDF)
Hikvision's product family catalogue also lists the HA-ALARM-BKT alongside the HA-ALARM-PIR1 and HA-ALARM-PIR2 detectors.
View Official Hikvision HiLook Product Family Brochure (PDF)
Important: The HA-ALARM-BKT is an official HiLook PIR bracket accessory. Confirm the physical mounting interface, supported detector models, mounting dimensions and adjustment range before installation. The PIR detector is sold separately.
