Hikvision HiLook HA-ALARM-PIR1 Wired PIR Motion Detector – 18m, 85.9° Detection & Pet Immunity
The Hikvision HiLook HA-ALARM-PIR1 Wired PIR Motion Detector is a professional indoor intrusion detection sensor designed for compatible wired and hybrid alarm systems.
Featuring an impressive 18-metre detection range and 85.9° detection angle, the HA-ALARM-PIR1 provides reliable motion detection for residential homes, offices, retail stores, warehouses and commercial premises.
The detector uses passive infrared (PIR) technology to detect movement by identifying changes in infrared energy within its monitored area.
Advanced 3D optics, digital temperature compensation, automatic sensitivity adjustment and IFT technology help maintain detection performance while reducing unwanted alarms.
The HA-ALARM-PIR1 features adjustable pet immunity, supporting up to 5kg in High sensitivity mode, 10kg in Auto mode and 15kg in Low sensitivity mode under suitable installation conditions.
Its integrated creep-zone protection helps improve detection coverage close to the detector, reducing potential blind spots.
Selectable end-of-line resistors provide flexible alarm and tamper wiring options for compatible intrusion alarm control panels.
The detector operates from a 9–16V DC power supply, with a typical voltage of 12V DC and maximum current consumption of approximately 12mA.
Designed for professional installation, the HA-ALARM-PIR1 supports wall mounting at a recommended height of 1.8–2.4 metres, with optional compatible wall and ceiling mounting accessories available separately.
The detector forms part of the HiLook Hybrid Alarm range and is suitable for compatible installations using the HA-ALARM-P48 control panel.
HiLook is a Hikvision product brand, providing professional intrusion detection equipment for Australian residential and commercial security installations.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Important: The HA-ALARM-PIR1 is a wired indoor PIR detector. It requires a compatible alarm control panel, suitable DC power supply and professional installation. Pet immunity depends on the selected sensitivity setting, mounting position and environmental conditions.
Australian Warranty Support – Subject to applicable product warranty terms and Australian Consumer Law.
Key Features
-
18m Detection Range: Extended indoor motion detection coverage.
-
85.9° Detection Angle: Wide-area intrusion detection.
-
Passive Infrared Technology: Detects movement through changes in infrared energy.
-
Adjustable Pet Immunity: Up to 5kg, 10kg or 15kg depending on sensitivity.
-
Three Sensitivity Modes: High, Auto and Low.
-
Advanced 3D Optics: Improved infrared signal focusing.
-
Creep-Zone Protection: Helps reduce blind spots directly beneath the detector.
-
Digital Temperature Compensation: Maintains detection performance as temperatures change.
-
Automatic Sensitivity Adjustment: Adapts to changing environmental conditions.
-
IFT Technology: Helps minimise false alarms caused by interference.
-
Anti-Insect Protection: Optical design helps minimise insect-related interference.
-
Selectable EOL Resistors: Flexible alarm and tamper wiring.
-
Front Tamper Protection: Detects unauthorised opening of the detector housing.
-
Blue Alarm LED: Visual indication of detector activation.
-
6500 Lux White Light Filter: Improved resistance to unwanted light interference.
-
9–16V DC Operation: Wide operating voltage range.
-
Low Current Consumption: Maximum 12mA at 12V DC.
-
Reverse Polarity Protection: Helps protect against incorrect DC polarity.
-
1.8–2.4m Mounting Height: Suitable for professional wall installations.
-
Optional Mounting Bracket: Compatible wall and ceiling accessories available separately.
-
Compact Housing: 65.4 × 86.8 × 45.5mm.
-
Indoor Installation: Suitable for residential and commercial security systems.
Technical Specifications
| Brand |
HiLook by Hikvision |
| Model |
HA-ALARM-PIR1 |
| Product Type |
Wired PIR Motion Detector |
| Detection Technology |
Passive Infrared (PIR) |
| Detection Range |
18m |
| Detection Angle |
85.9° |
| Detectable Speed |
0.3–2m/s |
| Sensitivity Adjustment |
High / Auto / Low |
| Pet Immunity – High |
Up to 5kg |
| Pet Immunity – Auto |
Up to 10kg |
| Pet Immunity – Low |
Up to 15kg |
| White Light Filter |
6500 Lux |
| Digital Temperature Compensation |
Supported |
| Creep-Zone Protection |
Supported |
| Optical Technology |
3D Optics |
| IFT Technology |
Supported |
| EOL Resistors |
Selectable Alarm and Tamper Resistors |
| Alarm Resistor Values |
1K / 2K2 / 4K7 / 5K6 / 8K2 |
| Tamper Resistor Values |
1K / 2K2 / 4K7 / 5K6 |
| Tamper Protection |
Front Cover |
| Alarm Indicator |
Blue LED |
| Connection |
Wired |
| Power Supply |
9–16V DC |
| Typical Voltage |
12V DC |
| Maximum Current |
12mA at 12V DC |
| Reverse Polarity Protection |
Supported |
| Operating Temperature |
−10°C to +55°C |
| Certified Operating Temperature |
−10°C to +40°C |
| Storage Temperature |
−20°C to +60°C |
| Operating Humidity |
10–90% RH |
| Dimensions (W × H × D) |
65.4 × 86.8 × 45.5mm |
| Weight |
68g |
| Housing Material |
PC + ABS |
| Recommended Mounting Height |
1.8–2.4m |
| Mounting |
Wall / Optional Ceiling Bracket |
| Application |
Indoor |
Detailed Features & Benefits
Extended 18-Metre Detection Coverage
The HA-ALARM-PIR1 provides up to 18 metres of detection coverage, making it suitable for larger indoor spaces and professional security installations.
85.9° Wide-Angle Detection
The detector's wide detection angle allows suitable coverage across rooms, hallways and other internal areas.
Advanced Passive Infrared Technology
PIR sensing detects changes in infrared energy caused by movement within the detector's coverage area.
Adjustable Pet Immunity
Three sensitivity modes provide different pet immunity settings: 5kg in High mode, 10kg in Auto mode and 15kg in Low mode.
Digital Temperature Compensation
The detector automatically adjusts sensitivity to help maintain performance as ambient temperatures approach human body temperature.
Automatic Sensitivity Adjustment
Automatic sensitivity technology helps maintain stable detection performance under changing environmental conditions.
Advanced 3D Optics
Three-dimensional optical design improves infrared signal focusing and detection of moving targets.
Creep-Zone Protection
Additional coverage near the detector helps reduce potential blind spots immediately below the mounting location.
IFT Interference Reduction
IFT technology helps prevent unwanted alarms by adjusting detection thresholds when electrical or electromagnetic interference occurs.
Anti-Insect Optical Protection
The optical design helps minimise insect-related interference and unwanted reflections within the detector housing.
Selectable End-of-Line Resistors
Selectable EOL resistors simplify integration with compatible alarm panels and support suitable alarm and tamper supervision.
Front-Cover Tamper Protection
The front tamper mechanism supports detection of unauthorised housing opening when correctly connected to the alarm system.
Low Power Consumption
The detector draws a maximum of approximately 12mA at 12V DC, making it suitable for professional wired alarm installations.
Wide Operating Voltage
Support for 9–16V DC provides flexibility when integrating the detector with compatible alarm control panels.
Compact Indoor Design
The housing measures 65.4 × 86.8 × 45.5mm, providing a compact and unobtrusive installation.
Ideal Applications
-
Residential Homes: Motion detection in living areas and hallways.
-
Pet-Friendly Properties: Suitable applications using correctly configured pet immunity.
-
Commercial Offices: Intrusion detection in reception areas and workspaces.
-
Retail Stores: Monitoring entrances, stockrooms and sales areas.
-
Showrooms: Protection of display areas.
-
Warehouses: Suitable indoor detection applications.
-
Workshops: Professional wired intrusion detection.
-
Alarm System Upgrades: Replacement of compatible existing PIR detectors.
-
New Alarm Installations: HiLook hybrid and compatible wired security systems.
Compatibility & Installation
The HiLook HA-ALARM-PIR1 is a wired passive infrared detector designed for compatible intrusion alarm control panels.
It is suitable for compatible HiLook Hybrid Alarm installations, including systems using the HA-ALARM-P48 control panel.
Recommended Installation Procedure
- Confirm compatibility with the intended alarm control panel.
- Review the official detector datasheet and installation instructions.
- Select a suitable indoor mounting location.
- Mount the detector at a height of 1.8–2.4 metres.
- Confirm the required coverage is within the 18m / 85.9° detection pattern.
- Avoid unsuitable locations with excessive heat or environmental interference.
- Consider pet movement and furniture placement.
- Secure the detector using suitable mounting hardware.
- Use a compatible optional mounting bracket where required.
- Connect the detector to a suitable 9–16V DC power supply.
- Connect the detector alarm output to the appropriate wired alarm zone.
- Configure the EOL resistors according to the control panel requirements.
- Connect and configure the tamper circuit where supported.
- Select High, Auto or Low sensitivity as appropriate.
- Restore power and check the detector's blue alarm indicator.
- Perform a complete detector walk test.
- Verify the alarm panel receives detector activation.
- Test the intended coverage area.
- Confirm suitable operation in the presence of household pets where applicable.
- Complete professional commissioning and handover.
Pet Immunity Notice: The detector's pet immunity varies by sensitivity mode. The stated weight limits do not guarantee immunity in every installation.
Power Notice: The HA-ALARM-PIR1 requires a wired 9–16V DC power supply. It is not a wireless battery-powered detector.
Mounting Notice: The recommended mounting height is 1.8–2.4m. Optional wall and ceiling mounting accessories are available separately.
Compatibility Notice: Confirm alarm wiring, EOL resistor values, tamper configuration and available power capacity before installation.
Indoor Use Notice: The detector is designed for indoor environments and should not be installed outdoors.
Professional Installation Notice: Installation and commissioning by a suitably licensed security technician are recommended.
Package Contents
- 1 × Hikvision HiLook HA-ALARM-PIR1 Wired PIR Motion Detector
Package Contents Notice: The alarm control panel, optional HA-ALARM-BKT mounting bracket, power supply, alarm cabling and installation services are not included unless expressly specified. Confirm supplied mounting hardware against the product packaging.
Frequently Asked Questions
What is the HiLook HA-ALARM-PIR1?
It is a wired passive infrared motion detector designed for compatible indoor alarm systems.
What is the detection range?
Up to 18 metres.
What is the detection angle?
85.9°.
Does the HA-ALARM-PIR1 have pet immunity?
Yes, with adjustable pet immunity depending on the selected sensitivity mode.
What are the pet immunity settings?
Up to 5kg in High mode, 10kg in Auto mode and 15kg in Low mode.
Will a 15kg dog always be ignored?
No. Pet immunity depends on correct installation, sensitivity settings and animal behaviour.
Does it use microwave detection?
No. The HA-ALARM-PIR1 uses passive infrared detection. The HA-ALARM-PIR2 is the dual-technology PIR and microwave model.
Does it support digital temperature compensation?
Yes.
Does it have creep-zone protection?
Yes.
Does it use 3D optics?
Yes.
Does it support selectable EOL resistors?
Yes.
Does it have tamper protection?
Yes, front-cover tamper protection.
What colour is the alarm indicator?
Blue.
Is it wired or wireless?
Wired.
What power supply does it require?
9–16V DC, with a typical operating voltage of 12V DC.
What is the maximum current consumption?
12mA at 12V DC.
Does it require batteries?
No. It uses a wired DC power supply.
Does it work with the HiLook HA-ALARM-P48?
It is suitable for compatible HA-ALARM-P48 installations when correctly wired and configured.
Can it work with other wired alarm panels?
Potentially, where the panel supports the detector's electrical and alarm output requirements.
Can it connect directly to a wireless AX PRO alarm panel?
No. A compatible wired input interface would be required where supported.
What mounting height is recommended?
1.8–2.4 metres.
Can it be wall mounted?
Yes.
Can it be ceiling mounted?
Yes, using a suitable optional mounting accessory.
Is a PIR bracket available?
Yes. The compatible HiLook HA-ALARM-BKT mounting accessory is available separately, subject to mounting compatibility.
Can it be installed outdoors?
No. It is intended for indoor use.
What are its dimensions?
65.4 × 86.8 × 45.5mm.
What is its weight?
Approximately 68g.
What is its operating temperature range?
−10°C to +55°C.
Is it suitable for homes?
Yes.
Is it suitable for offices and shops?
Yes, when installed within its specified coverage and environmental conditions.
Does it include an alarm control panel?
No.
Does it include professional alarm monitoring?
No.
Does it require professional installation?
Professional installation is recommended to ensure correct positioning, wiring, sensitivity configuration and walk testing.
Where can I buy the HiLook HA-ALARM-PIR1 in Australia?
Civic Electronic supplies genuine Australian Hikvision and HiLook security equipment with professional installer and trade support.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We supply genuine Australian Hikvision and HiLook alarm systems, CCTV equipment, video intercoms, access control and professional security accessories.
-
Authorised Hikvision Sales Partner: Genuine Australian Hikvision and HiLook equipment.
-
Hikvision Training Centre: Professional product knowledge and installer training.
-
Australian Warranty Support: Warranty assistance for eligible products.
-
Competitive Trade Pricing: Wholesale opportunities for eligible installers.
-
Technical Support: Assistance selecting compatible alarm equipment.
-
Professional Installer Support: Support for security technicians and system integrators.
-
Australia-Wide Delivery: Shipping available throughout Australia.
-
Free Standard Shipping: Available on eligible orders of $300 or more.
-
2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For HiLook HA-ALARM-PIR1 detectors, compatible HA-ALARM-BKT brackets and professional installer support, contact Civic Electronic on 1300 024 842.
Showroom: Unit 16, 2 Money Close, Rouse Hill NSW 2155.
Official Hikvision Manufacturer Documentation
Review Hikvision's official Australian HiLook alarm brochure for the HA-ALARM-PIR1 features, including digital temperature compensation, adjustable sensitivity and onboard EOL resistors.
Download Official Hikvision HiLook Alarm Brochure (PDF)
For detailed electrical specifications, detection coverage, sensitivity settings and mounting requirements, consult the HA-ALARM-PIR1 manufacturer datasheet.
Download HA-ALARM-PIR1 Manufacturer Datasheet (PDF)
Important: The HA-ALARM-PIR1 is a wired indoor PIR motion detector featuring 18m detection range, 85.9° coverage, adjustable pet immunity and 9–16V DC operation. Professional installation and walk testing are recommended.
