Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDP15P-EG2-WB AX PRO Wireless PIR Motion Detector – 15m, Pet Immune, 433MHz

Save 29% Save 29%
Original price $77.00
Original price $77.00 - Original price $77.00
Original price $77.00
Current price $55.00
$55.00 - $55.00
Current price $55.00
Availability:
in stock, ready to be shipped

Hikvision AX PRO DS-PDP15P-EG2-WB Wireless PIR Motion Detector – 15m, 30kg Pet Immunity, 433MHz

The Hikvision DS-PDP15P-EG2-WB AX PRO Wireless PIR Detector is a professional indoor motion detector designed for compatible Hikvision AX PRO wireless intrusion alarm systems.

Featuring a 15-metre detection range, 85.9-degree detection angle and pet immunity up to 30kg, this wireless PIR detector provides reliable motion detection for suitable residential and commercial security installations.

The DS-PDP15P-EG2-WB uses advanced passive infrared sensing technology to identify changes in infrared energy caused by movement within the protected area.

Unlike dual-technology detectors, this model uses passive infrared detection only and does not incorporate a microwave sensor.

The detector incorporates 52 detection zones and Hikvision's advanced digital signal processing technology to support accurate intrusion detection.

Its Smart Environmental Control (SEC) technology combines advanced digital processing and optical design to help improve detection performance in suitable indoor environments.

With pet immunity up to 30kg, the detector can help reduce unwanted alarms caused by suitable household pets when installed and configured according to the manufacturer's instructions.

The DS-PDP15P-EG2-WB supports three sensitivity modes: Auto, High and Pet.

These options allow professional installers to select appropriate detection settings for different protected environments.

The detector also incorporates digital temperature compensation, helping maintain detection performance as ambient conditions change.

Its 6,500 lux white light filter helps reduce unwanted interference caused by strong visible light.

Advanced sealed optics help protect the detector's internal sensing components against contamination and insect-related interference.

Integrated creep-zone protection helps detect movement close to the detector, reducing potential gaps in the protected area.

For wireless communication, the DS-PDP15P-EG2-WB uses Hikvision's advanced 433MHz Tri-X wireless technology.

The detector supports two-way RF communication with compatible Hikvision AX PRO control panels.

Its wireless communication incorporates AES-128 encryption and frequency hopping to help maintain secure and reliable communication.

Hikvision specifies a maximum wireless transmission range of up to 1.2 kilometres in unobstructed free-space conditions.

Actual wireless range depends on building construction, installation position, radio interference and other environmental factors.

The detector supports multiple enrolment methods, including power-up enrolment, Remote ID and QR code registration.

These methods provide flexibility for professional installers configuring compatible AX PRO alarm systems.

The DS-PDP15P-EG2-WB is powered by a single 3V CR123A lithium battery.

Hikvision specifies a standard standby battery life of up to five years under defined operating conditions.

Actual battery life depends on environmental temperature, detection activity, wireless signal conditions and system configuration.

The detector supports low-battery reporting through compatible alarm systems, helping users identify when battery replacement is required.

Integrated front and rear tamper protection helps detect unauthorised opening or removal of the detector.

The device also supports wireless signal strength indication, allowing installers to assess communication quality during commissioning.

Environmental temperature indication is supported for compatible system management functions.

A blue LED indicator provides local alarm indication during supported testing and operation.

The detector is designed for indoor wall-mounted installation at a height of approximately 1.8 to 2.4 metres.

Optional wall and ceiling mounting accessories are available for supported installation arrangements.

With compact dimensions of 65.5 × 103 × 48.5mm and a weight of approximately 128g, the detector offers discreet installation in homes, offices, retail stores and other suitable indoor environments.

The DS-PDP15P-EG2-WB is suitable for new Hikvision AX PRO installations and compatible system expansions requiring wireless motion detection.

It is also useful for professional alarm upgrades where installing new detector signal cabling would be difficult or undesirable.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDP15P-EG2-WB is a 433MHz wireless PIR detector. It requires a compatible Hikvision AX PRO control panel and cannot operate as a standalone alarm system.

Hikvision DS-PDP15P-EG2-WB AX PRO Wireless PIR Detector 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.

Key Features

  • Hikvision AX PRO Compatible: Designed for compatible Hikvision wireless alarm systems.
  • 15m Detection Range: Suitable for a wide range of indoor intrusion detection applications.
  • 85.9° Detection Angle: Broad motion detection coverage.
  • 52 Detection Zones: Advanced optical detection pattern.
  • 30kg Pet Immunity: Helps reduce unwanted alarms from suitable household pets.
  • Passive Infrared Detection: PIR motion sensing without microwave technology.
  • Smart Environmental Control: Advanced digital signal processing and optics.
  • Auto Sensitivity: Automatic sensitivity option.
  • High Sensitivity: Additional selectable detection mode.
  • Pet Sensitivity: Dedicated pet immunity configuration.
  • Digital Temperature Compensation: Supports consistent detection performance.
  • 6,500 Lux White Light Filter: Helps reduce strong-light interference.
  • Sealed Optics: Helps protect internal sensing components.
  • Creep-Zone Protection: Helps detect movement near the detector.
  • 433MHz Tri-X Wireless: Advanced Hikvision wireless communication.
  • Two-Way RF Communication: Supervised wireless communication with compatible panels.
  • AES-128 Encryption: Helps protect wireless transmissions.
  • Frequency Hopping: Helps improve wireless communication reliability.
  • Up to 1.2km Free-Space Range: Manufacturer-specified maximum transmission distance.
  • Multiple Enrolment Methods: Power-up, Remote ID and QR code.
  • Remote Configuration: Supported through compatible Hikvision system management tools.
  • Single CR123A Battery: 3V lithium battery operation.
  • Up to 5 Years Battery Life: Manufacturer-specified standby duration.
  • Low-Battery Reporting: Supports battery condition supervision.
  • Front Tamper Protection: Helps identify unauthorised opening.
  • Rear Tamper Protection: Helps identify removal from the mounting surface.
  • Signal Strength Indication: Useful for wireless installation testing.
  • Environmental Temperature Indication: Supported system information.
  • Blue Alarm LED: Local alarm indication.
  • Indoor Installation: Designed for protected indoor environments.
  • Compact Housing: 65.5 × 103 × 48.5mm.
  • Professional Installer Friendly: Suitable for new AX PRO installations and compatible expansions.

Technical Specifications

Brand Hikvision
Model DS-PDP15P-EG2-WB
Series AX PRO
Product Type Wireless PIR Motion Detector
Detection Method Passive Infrared (PIR)
Detection Range 15m
Detection Angle 85.9°
Detection Zones 52
Detectable Movement Speed 0.3–2m/s
Pet Immunity Up to 30kg
Sensitivity Auto / High / Pet
Smart Environmental Control Supported
Digital Processing Supported
Digital Temperature Compensation Supported
White Light Filter 6,500 Lux
Creep-Zone Protection Supported
Sealed Optics Supported
Tamper Protection Front and Rear
Environmental Temperature Indication Supported
Wireless Signal Strength Indication Supported
LED Indicator Blue (Alarm)
Wireless Technology Hikvision Tri-X
Transmission Method Two-Way RF Wireless
Wireless Frequency 433MHz
Transmission Security AES-128 Encryption
Frequency Hopping Supported
Wireless Range Up to 1.2km (Free Space)
Enrolment Methods Power-Up / Remote ID / QR Code
Power Supply Battery Powered
Battery Type 1 × CR123A Lithium
Battery Voltage 3V
Battery Life Up to 5 Years Standby
Low-Battery Reporting Supported
Operating Temperature -10°C to +55°C
Storage Temperature -20°C to +60°C
Operating Humidity 10%–90%
Dimensions (W × H × D) 65.5 × 103 × 48.5mm
Weight 128g
Mounting Height 1.8–2.4m
Mounting Method Wall
Optional Mounting Accessory Wall / Ceiling Bracket
Installation Environment Indoor

Detailed Features & Benefits

Professional Hikvision AX PRO Wireless Motion Detection

The DS-PDP15P-EG2-WB provides wireless indoor motion detection for compatible Hikvision AX PRO alarm systems.

Its battery-powered design reduces the need for detector signal cabling.

15-Metre PIR Detection Range

The detector provides a maximum specified detection range of 15 metres.

This makes it suitable for a variety of appropriately sized indoor areas.

Wide 85.9-Degree Detection Angle

The 85.9-degree detection pattern provides broad motion detection coverage when correctly positioned.

52 Detection Zones

The detector incorporates 52 detection zones to support detailed motion sensing across its specified coverage area.

Up to 30kg Pet Immunity

Pet immunity helps reduce unwanted alarms caused by suitable household pets when installed according to the manufacturer's instructions.

Correct mounting height, sensitivity configuration and furniture placement remain essential.

Smart Environmental Control Technology

Hikvision's Smart Environmental Control technology combines advanced digital signal processing and optical design to support reliable motion detection.

Three Sensitivity Modes

Auto, High and Pet sensitivity settings allow installers to configure detection behaviour for suitable environments.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance across changing ambient temperatures.

6,500 Lux White Light Filter

The white light filter helps reduce interference caused by strong visible light.

Advanced Sealed Optics

Sealed optics help protect the internal sensing components against contamination and insect-related interference.

Creep-Zone Protection

Creep-zone protection helps detect movement close to the installed detector.

433MHz Hikvision Tri-X Wireless

Tri-X wireless technology provides two-way communication with compatible Hikvision AX PRO alarm control panels.

AES-128 Wireless Encryption

AES-128 encryption helps protect wireless communication between the detector and compatible control panel.

Frequency Hopping

Frequency hopping helps maintain reliable communication in suitable radio environments.

Up to 1.2km Free-Space Wireless Range

Hikvision specifies a maximum transmission distance of 1.2km in unobstructed free-space conditions.

Indoor wireless range depends on walls, building materials, interference and installation conditions.

Convenient Wireless Enrolment

The detector supports power-up, Remote ID and QR code enrolment methods.

Remote Configuration

Supported detector settings can be managed through compatible Hikvision AX PRO system tools.

Up to Five Years Standby Battery Life

The detector uses one 3V CR123A lithium battery and supports up to five years of standby operation under manufacturer-specified conditions.

Low-Battery Supervision

Compatible alarm panels can report low-battery conditions to assist with planned maintenance.

Front and Rear Tamper Protection

Integrated tamper protection helps identify unauthorised opening or removal of the detector.

Wireless Signal Strength Indication

Signal strength information helps installers verify communication quality during commissioning.

Environmental Temperature Indication

The detector supports environmental temperature indication through compatible system functions.

Blue Alarm LED

The integrated blue LED provides local alarm indication during supported testing and operation.

Compact Indoor Housing

The detector measures 65.5 × 103 × 48.5mm and weighs approximately 128g.

Professional Wall Installation

The detector is designed for wall mounting at a height of 1.8–2.4 metres.

Optional Mounting Accessories

Optional wall and ceiling mounting accessories provide additional supported installation flexibility.

Suitable for Wireless Alarm Expansions

The DS-PDP15P-EG2-WB is suitable for expanding compatible AX PRO alarm installations without installing additional detector signal cables.

Ideal Applications

  • Residential Homes: Indoor motion detection for compatible AX PRO alarm systems.
  • Pet-Friendly Properties: Up to 30kg pet immunity under suitable installation conditions.
  • Commercial Offices: Wireless motion detection for protected workspaces.
  • Retail Stores: After-hours intrusion detection.
  • Showrooms: Motion detection across suitable display areas.
  • Warehouses: Protection of appropriately sized indoor areas.
  • Reception Areas: Wireless motion detection near designated entrances.
  • Corridors: Motion detection across suitable passageways.
  • AX PRO System Expansions: Adding compatible wireless alarm zones.
  • Alarm System Upgrades: Suitable where detector signal cabling is difficult.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDP15P-EG2-WB.

Series: AX PRO.

Detector Type: Wireless PIR.

Detection Range: 15m.

Pet Immunity: Up to 30kg.

Wireless Frequency: 433MHz.

Wireless Protocol: Hikvision Tri-X.

Power: 1 × CR123A 3V lithium battery.

Mounting Height: 1.8–2.4m.

Installation Environment: Indoor.

Compatible Systems: Supported Hikvision AX PRO 433MHz wireless control panels.

Recommended Installation Procedure

  • Confirm compatibility with the intended AX PRO control panel.
  • Verify that the alarm panel uses the appropriate 433MHz wireless frequency.
  • Review the official Hikvision datasheet and user manual.
  • Confirm the control panel firmware supports the detector.
  • Identify the required alarm zone.
  • Review the manufacturer's detection coverage diagram.
  • Select a suitable indoor mounting location.
  • Confirm the mounting height is between 1.8 and 2.4 metres.
  • Position the detector to cover the intended intrusion area.
  • Avoid unsuitable direct sunlight and strong heat sources.
  • Consider air-conditioning outlets and moving curtains.
  • Assess furniture placement and potential detection obstructions.
  • Consider pet movement where pet immunity is required.
  • Avoid positioning that allows pets to approach the detector at elevated heights.
  • Confirm the detector is within suitable wireless range.
  • Check for nearby radio interference sources.
  • Use the specified mounting method and accessories.
  • Securely mount the detector.
  • Confirm the CR123A battery is correctly installed.
  • Activate the detector according to the manufacturer's instructions.
  • Enrol the detector using power-up, Remote ID or QR code.
  • Assign the detector to the appropriate alarm zone.
  • Configure the required sensitivity setting.
  • Enable Pet mode where appropriate.
  • Verify communication with the AX PRO control panel.
  • Check wireless signal strength.
  • Confirm detector supervision is operating correctly.
  • Test front tamper protection.
  • Test rear tamper protection.
  • Perform a complete walk test.
  • Verify the intended detection coverage.
  • Confirm alarm events are correctly received by the control panel.
  • Check low-battery supervision.
  • Verify the detector operates correctly when the alarm system is armed.
  • Record the detector configuration.
  • Complete professional commissioning.

Wireless Compatibility Notice: The DS-PDP15P-EG2-WB operates at 433MHz. Compatibility with 868MHz-only AX PRO devices must not be assumed.

Wireless Range Notice: The 1.2km maximum transmission range applies to unobstructed free-space conditions. Actual indoor range will be lower depending on the installation environment.

Pet Immunity Notice: Pet immunity up to 30kg depends on correct installation and configuration. It does not guarantee that all animal movement will be ignored.

Battery Notice: Up to five years of standby battery life is a manufacturer specification under defined conditions. Actual battery life varies.

Outdoor Use Notice: The detector is designed for indoor installation and should not be exposed directly to outdoor weather conditions.

Professional Installation Notice: Installation by a suitably qualified security technician is recommended.

Package Contents

  • 1 × Hikvision DS-PDP15P-EG2-WB AX PRO Wireless PIR Detector
  • 1 × CR123A 3V Lithium Battery – Manufacturer-listed as included.

Package Contents Notice: Mounting screws, printed documentation and other accessories may vary according to supplied packaging. Optional mounting brackets and the AX PRO control panel are not included unless expressly specified.

Frequently Asked Questions

What is the Hikvision DS-PDP15P-EG2-WB?

It is a 433MHz AX PRO wireless PIR motion detector designed for compatible Hikvision alarm systems.

Is this a wireless detector?

Yes. It communicates wirelessly with a compatible AX PRO control panel.

Is it a PIR or dual-tech detector?

It is a PIR-only detector and does not incorporate a microwave sensor.

What is the detection range?

15 metres.

What is the detection angle?

85.9 degrees.

How many detection zones does it have?

52.

Does it support pet immunity?

Yes, up to 30kg under suitable installation conditions.

Will it ignore every pet under 30kg?

No. Pet immunity depends on mounting height, sensitivity settings, furniture placement and animal behaviour.

Does it have a Pet sensitivity mode?

Yes.

Does it support automatic sensitivity?

Yes.

Does it have a High sensitivity setting?

Yes.

What is Smart Environmental Control?

Hikvision's Smart Environmental Control technology combines digital processing and optical design to support reliable detection.

Does it support digital temperature compensation?

Yes.

What is the white light filter rating?

6,500 lux.

Does it have sealed optics?

Yes.

Does it support creep-zone protection?

Yes.

What wireless frequency does it use?

433MHz.

Does it use Hikvision Tri-X?

Yes.

Does it support two-way wireless communication?

Yes.

Does it support AES-128 encryption?

Yes.

Does it support frequency hopping?

Yes.

What is the maximum wireless transmission range?

Up to 1.2km in unobstructed free-space conditions.

Will it communicate over 1.2km inside a building?

Not necessarily. Building materials and radio interference can significantly reduce wireless range.

Can it connect to a Hikvision AX PRO control panel?

Yes, where the panel supports this 433MHz detector and its firmware.

Can it connect to the DS-PWA96-M-WB?

Yes, subject to compatible hardware and firmware.

Can it connect to an 868MHz-only panel?

Compatibility should not be assumed because this detector operates at 433MHz.

Can it operate without an alarm control panel?

No. It requires a compatible alarm system.

Does it connect directly to Wi-Fi?

No. It communicates using Hikvision's proprietary Tri-X wireless protocol.

Does it require alarm signal cables?

No. Alarm communication is wireless.

Does it require a battery?

Yes, one CR123A lithium battery.

What battery voltage does it use?

3V.

Is the battery included?

Yes. Hikvision's user manual lists one CR123A battery as included.

What is the expected battery life?

Up to five years standby under manufacturer-specified conditions.

Does it report low battery?

Yes, through compatible AX PRO system supervision.

Can the battery be replaced?

Yes, using the specified battery type and the manufacturer's replacement procedure.

Does it have front tamper protection?

Yes.

Does it have rear tamper protection?

Yes.

Does it support signal strength indication?

Yes.

Does it support environmental temperature indication?

Yes.

Does it have an LED indicator?

Yes, a blue alarm LED.

Can it be configured remotely?

Supported settings can be configured through compatible Hikvision alarm system tools.

How is the detector enrolled?

Using supported power-up, Remote ID or QR code enrolment methods.

Is it suitable for residential properties?

Yes, as part of a compatible indoor AX PRO alarm installation.

Can it be used in commercial offices?

Yes.

Can it be used in retail stores?

Yes.

Can it be used in warehouses?

Yes, for suitable indoor areas within the specified detection range.

Can it be installed outdoors?

No. It is intended for indoor installation.

What is the operating temperature range?

-10°C to +55°C.

What is the operating humidity range?

10–90%.

What is the recommended mounting height?

1.8–2.4 metres.

Can it be wall-mounted?

Yes.

Can it be ceiling-mounted?

Optional mounting accessories may support alternative mounting arrangements. Confirm the manufacturer's instructions before installation.

Are mounting brackets included?

Optional mounting brackets are not included unless expressly specified.

What are the detector dimensions?

65.5 × 103 × 48.5mm.

How much does it weigh?

Approximately 128g.

Does it contain a camera?

No. It is a PIR motion detector without an imaging sensor.

Does it record video?

No.

Does it provide smartphone notifications?

Notifications depend on the connected AX PRO panel and configured services.

Can it replace a wired PIR detector?

It can provide wireless motion detection as part of a compatible AX PRO system, but it does not directly connect to a conventional wired alarm zone.

Does it require professional installation?

Professional installation is recommended to ensure correct detector placement, wireless enrolment and alarm commissioning.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDP15P-EG2-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision alarm equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision alarm equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless PIR detectors, alarm control panels and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDP15P-EG2-WB datasheet and user manual for detection performance, wireless specifications, battery requirements and installation instructions.

Download Official Hikvision DS-PDP15P-EG2-WB Datasheet (PDF)

Download Official Hikvision Wireless PIR Detector User Manual (PDF)

View Official Hikvision Australia AX HYBRID PRO Compatibility List

Important: The DS-PDP15P-EG2-WB is a 433MHz wireless PIR detector with a 15m detection range, 85.9° detection angle and up to 30kg pet immunity. It supports Hikvision Tri-X two-way wireless communication, AES-128 encryption, frequency hopping and up to five years of standby battery life. A compatible Hikvision AX PRO control panel is required. Specifications and supported features may vary by hardware revision and firmware.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch