Skip to content
šŸ”„ 6% OFF Orders $1,400+ — Automatically Applied at Checkout | āœ“ Genuine AU Stock & Warranty | ⚔ 2-Hour Pickup | šŸ“ž 1300 024 842
šŸ”„ 6% OFF Orders $1,400+ — Automatically Applied at Checkout | āœ“ Genuine AU Stock & Warranty | ⚔ 2-Hour Pickup | šŸ“ž 1300 024 842

Hikvision DS-PM1-O1L-WB AX PRO Wireless Relay Module – 433MHz, 1-Channel Output Control

Save 36% Save 36%
Original price $66.00
Original price $66.00 - Original price $66.00
Original price $66.00
Current price $42.00
$42.00 - $42.00
Current price $42.00
Availability:
in stock, ready to be shipped

Hikvision DS-PM1-O1L-WB AX PRO Wireless Relay Module – 433MHz, 1-Channel Output Control

The Hikvision DS-PM1-O1L-WB AX PRO Wireless Relay Module is a compact, professional low-voltage relay controller designed for compatible Hikvision AX PRO wireless intrusion alarm systems.

Featuring one configurable normally open/normally closed relay output, the DS-PM1-O1L-WB allows professional installers to integrate supported external electrical equipment with an AX PRO security system.

The relay module is suitable for a range of low-voltage automation applications, including auxiliary lighting control, external relay activation, alarm-triggered equipment operation and other compatible electrical control functions.

Unlike a conventional standalone relay, the DS-PM1-O1L-WB can be operated through a compatible Hikvision AX PRO alarm control panel using configured system events and user commands.

Supported operating methods include manual control, scheduled operation, alarm-triggered automation, fault-triggered actions and other configured system events.

The module supports compatible remote control through the Hikvision application, wireless keypad or wireless keyfob, subject to the connected AX PRO system and its configuration.

Designed for professional security and automation integration, the DS-PM1-O1L-WB uses 433MHz two-way wireless communication to exchange commands and status information with compatible AX PRO control panels.

Advanced AES-128 wireless encryption helps protect communication between the relay module and the alarm system.

Hikvision specifies a maximum wireless transmission range of 800 metres in unobstructed open-space conditions.

Actual wireless range depends on building construction, metal structures, installation position, electrical interference and surrounding environmental conditions.

The DS-PM1-O1L-WB features one relay output supporting normally open and normally closed contact configurations.

The relay output supports a maximum specified load of 5A at up to 36V DC, subject to the manufacturer's electrical ratings.

The module is intended for low-voltage DC switching applications and must not be used to switch mains-voltage loads directly.

Where higher-voltage or higher-current equipment requires control, a suitably rated external interface or contactor must be selected and installed by a qualified professional.

For additional system integration, the module includes one configurable normally open/normally closed alarm input intended for external tamper monitoring.

This allows supported external equipment tamper conditions to be monitored through the connected alarm system.

The DS-PM1-O1L-WB incorporates three LED status indicators to assist with installation and troubleshooting.

The indicators provide information about registration and wireless signal status, power status and relay output status.

A dedicated Learn button supports enrolment and device management during professional commissioning.

The module also includes a manufacturer-designated serial debugging interface for applicable servicing functions.

The DS-PM1-O1L-WB requires an external 7–24V DC power supply.

This model is not battery-powered. A suitable regulated power supply must be provided according to the installation requirements.

Its compact housing measures just 38 Ɨ 25 Ɨ 18mm, making it suitable for installation within an appropriate protected low-voltage equipment enclosure.

With a specified weight of approximately 28.5g, the module is lightweight and convenient for professional integration.

The DS-PM1-O1L-WB supports operating temperatures from āˆ’10°C to +55°C and relative humidity from 10% to 90%.

The module is designed for protected indoor installation and should not be exposed to moisture, condensation or outdoor weather.

For professional installations, the DS-PM1-O1L-WB provides a convenient method of adding wireless low-voltage output control to compatible Hikvision AX PRO systems.

It is particularly useful where an installer needs to control suitable auxiliary equipment without running a dedicated control cable directly from the alarm panel.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: This product requires a compatible AX PRO control panel, a suitable external 7–24V DC power supply and correctly rated low-voltage equipment. It is not a standalone smart switch, battery-operated relay or direct 230V AC switching device.

Hikvision DS-PM1-O1L-WB AX PRO Wireless Relay Module Australian Warranty

2-Year Australian Warranty – Subject to confirmation of the applicable product warranty terms and Australian Consumer Law.

Key Features

  • Wireless Relay Module: Low-voltage output control for compatible Hikvision AX PRO systems.
  • Single Relay Output: One configurable relay channel.
  • NO/NC Relay Contacts: Supports normally open and normally closed switching configurations.
  • Maximum Relay Rating: Up to 5A at 36V DC.
  • External DC Power: Requires a suitable 7–24V DC supply.
  • 433MHz Wireless: Designed for compatible AX PRO wireless systems.
  • Two-Way Communication: Supports wireless commands and device status communication.
  • 2GFSK Modulation: Manufacturer-specified wireless modulation.
  • AES-128 Encryption: Helps protect wireless transmissions.
  • 800m Wireless Range: Maximum manufacturer-specified open-space distance.
  • Application Control: Supports manual operation through compatible Hikvision applications.
  • Keypad Control: Supports configured operation using compatible wireless keypads.
  • Keyfob Control: Supports configured operation using compatible wireless keyfobs.
  • Alarm-Triggered Automation: Operate the relay according to supported alarm events.
  • Fault-Triggered Automation: Supports configured fault-based scenarios.
  • Scheduled Operation: Supports configured time-based automation.
  • Manual Operation: Operate the relay through supported user controls.
  • System Operation Events: Supports compatible event-based relay scenarios.
  • External Tamper Input: One configurable NO/NC alarm input.
  • Three Status LEDs: Indicate registration/signal, power and relay status.
  • Learn Button: Supports device registration.
  • Compact Design: Small housing suitable for protected installation locations.
  • 38 Ɨ 25 Ɨ 18mm Dimensions: Space-saving module design.
  • Lightweight: Approximately 28.5g.
  • Wall Mounting: Manufacturer-supported mounting method.
  • Indoor Installation: Designed for protected indoor environments.
  • Professional Automation Integration: Suitable for compatible low-voltage control applications.

Technical Specifications

Brand Hikvision
Model DS-PM1-O1L-WB
Series AX PRO
Product Type Wireless Low-Voltage Relay Module
Relay Outputs 1
Relay Contact Configuration Normally Open / Normally Closed
Relay Switching Voltage 0–36V DC
Maximum Relay Current 5A
Alarm Inputs 1
Alarm Input Function External Tamper Monitoring
Alarm Input Configuration Normally Open / Normally Closed
Scenario Settings Alarm / Operation / Fault / Schedule / Manual
Application Control Supported Through Compatible AX PRO System
Keypad Control Supported When Configured
Keyfob Control Supported When Configured
Wireless Frequency 433MHz
Wireless Communication Two-Way RF
RF Modulation 2GFSK
Wireless Encryption AES-128
Wireless Range Up to 800m (Open Space)
Power Supply External DC Supply
Input Voltage 7–24V DC
Battery Powered No
Learn Button 1, for Registration
Serial Interface 1, Manufacturer Debugging Interface
Status Indicators 3 LEDs
Registration / Signal LED Green / Red
Power LED Green
Relay Status LED Blue
Operating Temperature āˆ’10°C to +55°C
Operating Humidity 10–90% RH
Dimensions (W Ɨ H Ɨ D) 38 Ɨ 25 Ɨ 18mm
Weight 28.5g
Housing Material Plastic
Housing Colour White
Installation Method Wall Mounting
Installation Environment Protected Indoor Location
Compatible Systems Supported Hikvision AX PRO 433MHz Control Panels

Detailed Features & Benefits

Professional Wireless Relay Control

The DS-PM1-O1L-WB enables compatible Hikvision AX PRO alarm systems to operate suitable low-voltage electrical equipment through a wireless relay interface.

Single-Channel Relay Output

One relay output provides a convenient switching interface for supported auxiliary devices.

Normally Open and Normally Closed Contacts

The relay supports NO and NC contact configurations, providing flexibility for compatible low-voltage control circuits.

5A Maximum Relay Current

The relay supports a maximum specified current of 5A within the manufacturer's 0–36V DC switching range.

7–24V DC Power Input

The module operates from a suitable external 7–24V DC power supply. It is not battery powered.

Manual Relay Operation

Supported manual control functions allow authorised users to operate the relay through a compatible AX PRO system.

Alarm-Triggered Automation

The relay can be configured to operate according to supported alarm events, allowing suitable external equipment to respond to security system activity.

Operation-Based Scenarios

Supported system operation events can be used to trigger configured relay actions.

Fault-Triggered Scenarios

The relay supports configured actions based on compatible alarm system fault events.

Scheduled Relay Operation

Supported schedules allow the relay to operate at configured times through the connected alarm system.

Compatible Application Control

The module supports manual relay control through compatible Hikvision alarm management applications.

Compatible Wireless Keypad Control

Supported keypad functions can operate the relay when correctly configured in the AX PRO system.

Compatible Wireless Keyfob Control

Supported keyfob functions can be assigned to relay control according to system configuration.

External Tamper Input

One configurable alarm input supports normally open or normally closed external tamper monitoring.

433MHz Two-Way Wireless Communication

The module communicates wirelessly with compatible Hikvision AX PRO 433MHz control panels.

AES-128 Wireless Encryption

AES-128 encryption helps protect wireless commands and status communication.

Up to 800m Open-Space Wireless Range

Hikvision specifies a maximum transmission distance of 800 metres in unobstructed open-space conditions.

Registration and Signal LED

The green/red registration and signal indicator assists with enrolment and wireless communication checks.

Power Status LED

The green power LED provides a convenient visual indication of module power status.

Relay Status LED

The blue relay status LED provides visual feedback about the relay's operating state.

Dedicated Learn Button

The Learn button supports registration and relevant device management procedures.

Compact Module Housing

Measuring only 38 Ɨ 25 Ɨ 18mm, the module is suitable for installation in appropriately protected low-voltage equipment locations.

Lightweight Construction

At approximately 28.5g, the module is compact and easy to integrate into suitable professional installations.

Professional Low-Voltage Automation

The DS-PM1-O1L-WB provides a practical solution for extending compatible AX PRO alarm systems with low-voltage relay-controlled functions.

Ideal Applications

  • Low-Voltage Lighting Control: Switching suitable DC lighting circuits within the relay's electrical rating.
  • Auxiliary Alarm Equipment: Operating compatible external security devices.
  • Alarm-Triggered Automation: Activating suitable equipment following configured alarm events.
  • Scheduled Automation: Operating compatible devices according to supported schedules.
  • External Relay Activation: Controlling suitable low-voltage interface relays.
  • Commercial Security Systems: Additional output control for supported equipment.
  • Residential Alarm Systems: Low-voltage auxiliary control through compatible AX PRO systems.
  • Retail Stores: Integration with suitable low-voltage auxiliary equipment.
  • Offices: Additional low-voltage automation functions.
  • Professional Alarm Upgrades: Adding wireless relay control to compatible AX PRO installations.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PM1-O1L-WB.

Series: AX PRO.

Product Type: Wireless Low-Voltage Relay Module.

Wireless Frequency: 433MHz.

Wireless Communication: Two-Way RF.

Maximum Wireless Range: 800m in unobstructed open space.

Power Supply: External 7–24V DC.

Relay Output: One NO/NC output, maximum 5A at 36V DC.

Alarm Input: One NO/NC external tamper input.

Mounting: Protected indoor installation.

Compatible Systems: Supported Hikvision AX PRO 433MHz control panels.

Recommended Installation Procedure

  • Confirm the exact DS-PM1-O1L-WB model and hardware revision.
  • Verify compatibility with the intended Hikvision AX PRO control panel.
  • Confirm the control panel supports 433MHz wireless relay modules.
  • Check the available wireless device capacity of the control panel.
  • Review the official Hikvision datasheet and installation guide.
  • Identify the equipment requiring relay control.
  • Confirm that the connected circuit operates within the supported low-voltage DC range.
  • Check the voltage and current requirements of the connected load.
  • Confirm the relay rating is suitable for the intended application.
  • Consider load inrush current and inductive switching requirements.
  • Select a suitable regulated 7–24V DC power supply.
  • Confirm the power supply can support the module's operating requirements.
  • Provide appropriate circuit protection according to the installation design.
  • Select a protected indoor installation location.
  • Use a suitable enclosure where required.
  • Keep the module away from moisture and condensation.
  • Keep the module away from excessive heat.
  • Consider nearby metal structures and wireless interference.
  • Confirm reliable wireless communication with the alarm control panel.
  • Isolate power before making wiring connections.
  • Connect the external DC power supply according to the manufacturer wiring diagram.
  • Connect the relay output to the intended low-voltage control circuit.
  • Select the appropriate NO or NC relay contact arrangement.
  • Connect the external tamper input if required.
  • Secure all wiring and terminal connections.
  • Check wiring polarity where applicable.
  • Confirm there are no exposed conductors or short circuits.
  • Apply power to the module.
  • Check the power LED.
  • Use the Learn button to enrol the module according to Hikvision's instructions.
  • Confirm successful registration with the AX PRO control panel.
  • Check wireless signal indication.
  • Configure the relay output function.
  • Configure manual operation if required.
  • Configure alarm-triggered automation if required.
  • Configure operation-based scenarios if required.
  • Configure fault-based scenarios if required.
  • Configure scheduled operation if required.
  • Configure supported application control.
  • Configure keypad or keyfob control where required.
  • Test the relay in a controlled manner.
  • Verify the relay status LED changes as expected.
  • Confirm the connected equipment operates correctly.
  • Check the external tamper input where installed.
  • Verify the relay returns to the intended state after system events.
  • Assess behaviour following power loss and restoration.
  • Confirm the automation does not create an unsafe operating condition.
  • Document the wiring and automation configuration.
  • Complete professional commissioning and handover.

Electrical Safety Notice: The DS-PM1-O1L-WB is a low-voltage DC relay module. Its output is rated for 0–36V DC, up to 5A. Do not connect 230V AC mains voltage directly to the relay terminals.

External Power Notice: The module requires a suitable 7–24V DC supply. It is not battery powered and does not independently provide power to connected equipment.

Relay Rating Notice: Confirm the electrical characteristics of the connected load, including any inrush or inductive current. A suitably rated external interface may be required.

Access Control Notice: Where the module is used with door release equipment, the complete system must comply with applicable access control, emergency egress and electrical safety requirements.

Wireless Compatibility Notice: The DS-PM1-O1L-WB operates at 433MHz. Compatibility with 868MHz-only AX PRO systems must not be assumed.

Wireless Range Notice: The specified 800m wireless range applies to unobstructed open-space conditions. Actual indoor range may be significantly shorter.

Installation Notice: This module is intended for protected indoor installation and must not be exposed directly to outdoor weather.

Professional Installation Notice: Installation and electrical integration should be completed by suitably qualified professionals. Any mains-related work must be performed by an appropriately licensed electrician.

Package Contents

  • 1 Ɨ Hikvision DS-PM1-O1L-WB AX PRO Wireless Relay Module

Package Contents Notice: Confirm the supplied mounting materials and documentation against the manufacturer's packaging. A suitable external 7–24V DC power supply, compatible AX PRO control panel and connected electrical equipment are not assumed to be included.

Frequently Asked Questions

What is the Hikvision DS-PM1-O1L-WB?

It is a wireless low-voltage relay module designed for compatible Hikvision AX PRO alarm systems.

What does the relay module do?

It allows a compatible AX PRO system to switch suitable external low-voltage electrical circuits through a relay output.

How many relay outputs does it have?

One.

Does it support normally open contacts?

Yes.

Does it support normally closed contacts?

Yes.

What is the maximum relay switching voltage?

36V DC.

What is the maximum relay current?

5A, subject to the manufacturer's switching specifications.

Can it directly switch 230V AC equipment?

No. The relay is specified for low-voltage DC switching and must not be connected directly to mains-voltage loads.

Can it control lighting?

Yes, suitable low-voltage DC lighting or an appropriately rated external control interface may be operated when professionally configured.

Can it control a mains-powered light through an external contactor?

A suitably designed external interface may allow this application, but all mains electrical work must be completed by an appropriately licensed electrician.

Can it control an electric door strike?

Potentially, where the complete access control design, electrical ratings and emergency egress requirements are satisfied.

Can it be used for alarm-triggered automation?

Yes.

Can it operate according to a schedule?

Yes, through supported AX PRO automation settings.

Can it operate following an alarm system fault?

Yes, where the required fault-based scenario is supported and configured.

Can it be operated manually?

Yes.

Can it be controlled through a Hikvision application?

Yes, through compatible AX PRO system functions.

Can it be controlled using a Hikvision keypad?

Yes, where supported and correctly configured.

Can it be controlled using a Hikvision keyfob?

Yes, where supported and correctly configured.

Does it have an alarm input?

Yes. It has one configurable NO/NC input intended for external tamper monitoring.

Can the alarm input be configured as normally open?

Yes.

Can the alarm input be configured as normally closed?

Yes.

Does it have status LEDs?

Yes. Three LED indicators provide registration/signal, power and relay status information.

What does the green power LED indicate?

It provides a visual indication of module power status.

What does the blue relay LED indicate?

It provides visual feedback about the relay operating state.

What does the registration/signal LED indicate?

It assists with device registration and wireless communication status.

Does it have a Learn button?

Yes, for supported device registration procedures.

Is the DS-PM1-O1L-WB wireless?

Yes. It communicates wirelessly with compatible AX PRO control panels.

Does wireless operation mean no wiring is required?

No. The module still requires wired DC power and wiring to the controlled circuit.

What wireless frequency does it use?

433MHz.

Does it support two-way wireless communication?

Yes.

Does it support AES-128 encryption?

Yes.

What is the maximum wireless range?

Up to 800 metres in unobstructed open-space conditions.

Will it achieve 800m range inside a building?

Not necessarily. Walls, metal structures and radio interference can reduce wireless range.

Can it connect to the Hikvision DS-PWA96-M-WB?

It is intended for compatible 433MHz AX PRO systems. Confirm panel firmware and device compatibility before installation.

Can it be added to a Hikvision AX PRO alarm kit?

Yes, where the included control panel supports the module and has available capacity.

Can it connect to an 868MHz-only AX PRO panel?

Compatibility should not be assumed because this module operates at 433MHz.

Can it operate without an AX PRO control panel?

Normal wireless alarm automation requires a compatible control panel.

Does it connect directly to Wi-Fi?

No. It communicates with the alarm system using its specified 433MHz wireless interface.

Is the relay module battery powered?

No.

What power supply does it require?

A suitable external 7–24V DC power supply.

Can I power it from 12V DC?

Yes. A suitable regulated 12V DC supply falls within the specified input voltage range.

Can I power it from 24V DC?

Yes, provided the supply meets the manufacturer's requirements.

Can I connect it directly to 230V AC power?

No.

Does the relay output provide power to connected equipment?

No. The relay is a switching interface. Connected equipment requires an appropriate power source.

Can it be installed inside an equipment enclosure?

Yes, in a suitable protected enclosure that allows safe wiring and reliable wireless communication.

Can it be installed near metal equipment?

Nearby metal may affect wireless performance. The installation position should be assessed and tested.

Can it be installed outdoors?

Not directly. The module requires a suitably protected installation environment.

What is the operating temperature range?

āˆ’10°C to +55°C.

What is the operating humidity range?

10–90% relative humidity.

What are the module dimensions?

38 Ɨ 25 Ɨ 18mm.

How much does it weigh?

Approximately 28.5g.

What colour is the module?

White.

What is the housing material?

Plastic.

Does it support wall mounting?

Yes.

Can it be used in residential alarm systems?

Yes, where the connected AX PRO system supports the module.

Can it be used in commercial alarm systems?

Yes, for suitable low-voltage automation applications.

Does it have a built-in PIR detector?

No.

Does it contain a camera?

No.

Does it record video?

No.

Does it include a power supply?

A power supply is not assumed to be included. Confirm the supplied package contents before ordering.

Does it include an AX PRO alarm panel?

No. A compatible control panel must be purchased separately unless included in a bundle.

Does it include professional alarm monitoring?

No.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but no longer provides alarm monitoring services.

Does it require professional installation?

Professional installation is recommended. Electrical integration must comply with applicable Australian safety and licensing requirements.

Where can I buy the Hikvision DS-PM1-O1L-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including wireless alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance selecting compatible Hikvision alarm equipment.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless relay modules, alarm control panels and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PM1-O1L-WB datasheet and installation guide for relay ratings, DC power requirements, wireless specifications and wiring instructions.

Download Official Hikvision DS-PM1-O1L-WB Datasheet (PDF)

Download Official Hikvision DS-PM1-O1L-WB Installation Guide (PDF)

Important: The Hikvision DS-PM1-O1L-WB is a 433MHz wireless relay module featuring one NO/NC output rated up to 5A at 36V DC, one configurable external tamper input, AES-128 encryption and up to 800m open-space wireless communication. It requires an external 7–24V DC power supply and a compatible AX PRO control panel. The module is not battery powered and is not suitable for directly switching 230V AC mains loads.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard ShippingĀ applies to all orders valued atĀ $300 or more.
  • Express ShippingĀ is available for an additionalĀ $65 per order.

Please note thatĀ Express ShippingĀ is not available for all postcodes. Customers are advised to confirm eligibility through theĀ Australia Post CoverageĀ link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we areĀ unable to refund shipping costsĀ for postcodes not covered by the express delivery network:

AustraliaĀ PostĀ Coverage

2. Order Processing

  • Orders placedĀ before 8:00 AM (Sydney time)Ā on a business day mayĀ packed and dispatched the same day base on stock availability.
  • Orders are processedĀ Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email afterĀ 11:00 AMĀ on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping:Ā Next business day delivery within theĀ Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post AreasĀ (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping:Ā Delivery may take betweenĀ 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping:Ā Please allow up toĀ 10 business daysĀ from dispatch.

If you have not received your order withinĀ 5 business daysĀ (express) orĀ 10 business daysĀ (standard) after receiving your shipment tracking details, please contact us with yourĀ full nameĀ andĀ order numberĀ so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check yourĀ email spam or junk folderĀ for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveriesĀ require a signature upon receipt.
  • Parcels will not be left unattendedĀ or with a ā€œsafe dropā€ unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, aĀ delivery cardĀ will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • WeĀ do not deliver to PO Boxes. Orders must be addressed to a validĀ physical delivery addressĀ within Australia.

Delivery times areĀ estimates onlyĀ and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We areĀ not liable for delays, loss, or damageĀ that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If anĀ incorrect, incomplete, or undeliverable addressĀ (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing aĀ tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, aĀ signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, aĀ collection noticeĀ will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, weĀ cannot guarantee delivery timesĀ and areĀ unable to intervene in courier operationsĀ once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch