Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDC10AM-EG2-WB AX PRO Wireless PIR AM Curtain Detector – 10m, Anti-Masking, 433MHz

Save 13% Save 13%
Original price $85.00
Original price $85.00 - Original price $85.00
Original price $85.00
Current price $74.00
$74.00 - $74.00
Current price $74.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDC10AM-EG2-WB AX PRO Wireless PIR AM Curtain Detector – 10m, Anti-Masking, 433MHz

The Hikvision DS-PDC10AM-EG2-WB AX PRO Wireless PIR Anti-Masking Curtain Detector is a professional indoor and outdoor intrusion detector designed to protect windows, doorways, entrances and other defined security areas.

Featuring passive infrared motion detection, active infrared anti-masking protection and Hikvision 433MHz Tri-X wireless communication, the DS-PDC10AM-EG2-WB provides a flexible solution for compatible Hikvision AX PRO wireless alarm systems.

Unlike conventional wide-angle PIR detectors, this model uses a narrow 5-degree curtain detection pattern to monitor specific areas without unnecessarily covering an entire room.

The detector supports a maximum detection range of 10 metres when wall-mounted and 5 metres when ceiling-mounted.

Its slim housing makes it particularly suitable for installation near window frames, door frames and narrow building openings.

The DS-PDC10AM-EG2-WB incorporates an advanced PIR sensor designed to detect qualifying infrared changes associated with movement across the protected area.

With 32 detection zones and support for detectable movement speeds between 0.3 and 2 metres per second, the detector provides focused intrusion detection within its specified coverage pattern.

A major advantage of this model is its active infrared anti-masking technology, which helps detect attempts to obstruct the detector's sensing area.

Anti-masking protection adds an additional layer of security by helping identify deliberate interference with the detector.

The detector also supports directional detection, allowing professional installers to configure suitable movement-direction detection through compatible alarm equipment.

For appropriate wall-mounted installations, Hikvision specifies pet immunity up to 12kg.

Pet immunity is not supported when the detector is ceiling-mounted.

Selectable Auto and Pet sensitivity modes allow installers to configure the detector according to the protected environment.

Additional detection technologies include digital temperature compensation, digital signal processing, sealed optics and creep-zone protection.

A 6,500 lux white light filter helps reduce interference from strong visible light sources.

The detector communicates with compatible Hikvision AX PRO alarm equipment using Tri-X two-way wireless technology operating at 433MHz.

Hikvision specifies wireless communication of up to 1 kilometre in free-space conditions.

Actual wireless range depends on building materials, installation position, environmental conditions and radio interference.

Wireless communication incorporates AES-128 encryption and frequency hopping to help protect transmitted information and maintain reliable communication.

The DS-PDC10AM-EG2-WB includes front and rear tamper protection, helping identify unauthorised opening or removal of the detector.

Its LED indicators provide visual feedback during supported alarm and masking events.

  • Blue LED: Alarm indication.
  • Green and Orange LEDs: Anti-masking indication.

The detector supports wireless signal strength indication and environmental temperature indication through compatible system functionality.

Multiple enrolment methods are supported, including power-up registration, remote device ID and QR code enrolment.

Powered by two CR123A 3V batteries, the detector offers manufacturer-specified battery endurance of up to five years in standby conditions.

Actual battery life depends on operating temperature, alarm activity, wireless communication and battery condition.

With an IP65 weather-resistance rating, the DS-PDC10AM-EG2-WB is suitable for appropriately installed indoor and outdoor applications.

The detector operates within a temperature range of -25°C to +60°C.

Its compact housing measures 29.2 × 134.4 × 39.5mm and weighs approximately 118.5g.

Hikvision specifies a mounting height between 2 and 3.5 metres.

The detector supports both wall and ceiling installation, with an L-shaped mounting adapter included according to the manufacturer.

The DS-PDC10AM-EG2-WB is an excellent choice for professional security installers requiring narrow-area wireless PIR intrusion detection with active anti-masking protection.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDC10AM-EG2-WB is a PIR-only anti-masking curtain detector. It does not include microwave sensing. For PIR and microwave dual-technology detection, refer to the separate Hikvision DS-PDC10DM-EG2-WB model.

Hikvision DS-PDC10AM-EG2-WB AX PRO Wireless PIR Anti-Masking Curtain Detector 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.

Key Features

  • Passive Infrared Detection: Professional PIR motion detection technology.
  • Active Infrared Anti-Masking: Helps identify attempts to obstruct the detector.
  • 10m Wall-Mounted Detection: Suitable for protecting defined entry points.
  • 5m Ceiling-Mounted Detection: Narrow curtain coverage from an overhead position.
  • 5° Detection Angle: Focused curtain-style intrusion detection.
  • 32 Detection Zones: Structured motion detection coverage.
  • Directional Detection: Supports movement-direction detection.
  • Up to 12kg Pet Immunity: For suitable wall-mounted installations only.
  • Auto and Pet Sensitivity: Selectable detection settings.
  • Digital Temperature Compensation: Helps maintain PIR detection performance.
  • Digital Signal Processing: Advanced processing of detection signals.
  • Sealed Optics: Helps protect internal sensing components.
  • Creep-Zone Protection: Supports detection close to the detector.
  • 6,500 Lux White Light Filter: Helps reduce visible-light interference.
  • 433MHz Tri-X Wireless: Designed for compatible Hikvision AX PRO systems.
  • Two-Way RF Communication: Wireless communication with compatible alarm equipment.
  • Up to 1km Free-Space Wireless Range: Manufacturer-specified maximum under suitable conditions.
  • AES-128 Encryption: Helps secure wireless communication.
  • Frequency Hopping: Supports wireless communication reliability.
  • Front and Rear Tamper Protection: Helps detect unauthorised interference.
  • Environmental Temperature Indication: Supported through compatible system functionality.
  • Signal Strength Indication: Assists with installation and commissioning.
  • Blue Alarm LED: Visual alarm indication.
  • Green and Orange Masking LEDs: Visual anti-masking indication.
  • Multiple Enrolment Methods: Power-up, remote ID and QR code.
  • Battery Powered: Uses two CR123A batteries.
  • Up to Five-Year Standby Battery Life: Manufacturer-specified endurance.
  • IP65 Weather Resistance: Suitable for appropriately installed outdoor applications.
  • -25°C to +60°C Operation: Wide operating temperature range.
  • Slim Housing: 29.2 × 134.4 × 39.5mm.
  • Wall or Ceiling Mounting: Flexible installation options.
  • L-Shaped Mounting Adapter: Included according to Hikvision.

Technical Specifications

Brand Hikvision
Model DS-PDC10AM-EG2-WB
Product Series AX PRO
Product Type Wireless PIR Anti-Masking Curtain Detector
Detection Method Passive Infrared
PIR Sensor SFG323-711
Wall-Mounted Detection Range 10m
Ceiling-Mounted Detection Range 5m
Detection Angle 5°
Detection Zones 32
Detectable Movement Speed 0.3–2m/s
Sensitivity Auto / Pet
Wall-Mounted Pet Immunity Up to 12kg
Ceiling-Mounted Pet Immunity Not Supported
Anti-Masking Active Infrared
Directional Detection Supported
White Light Filter 6,500 Lux
Digital Temperature Compensation Supported
Digital Processing Supported
Sealed Optics Supported
Creep-Zone Protection Supported
Tamper Protection Front and Rear
Environmental Temperature Indication Supported
Signal Strength Indication Supported
Alarm LED Blue
Masking LED Green + Orange
Wireless Technology Hikvision Tri-X
Transmission Method Two-Way RF
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 1km Free Space
Frequency Hopping Supported
Enrolment Power-Up / Remote ID / QR Code
Power Supply Battery Powered
Battery Type 2 × CR123A
Typical Voltage 3V
Battery Life Up to 5 Years Standby
Operating Temperature -25°C to +60°C
Storage Temperature -25°C to +60°C
Operating Humidity 10%–90%
Weather Resistance IP65
Dimensions (W × H × D) 29.2 × 134.4 × 39.5mm
Weight 118.5g
Mounting Height 2–3.5m
Mounting Method Wall / Ceiling
Application Indoor / Outdoor
Included Mounting Adapter L-Shaped Adapter

Detailed Features & Benefits

Professional PIR Curtain Detection

The DS-PDC10AM-EG2-WB uses passive infrared sensing to monitor movement across a narrow curtain-shaped detection area.

This makes it suitable for protecting windows, doorways and defined building openings.

Active Infrared Anti-Masking Protection

Integrated active infrared anti-masking technology helps detect attempts to obstruct the detector's sensing area.

This provides an additional security feature for professional intrusion detection applications.

10-Metre Wall-Mounted Detection Range

When installed on a suitable wall, the detector provides a maximum specified detection range of 10 metres.

The actual coverage pattern must be confirmed using Hikvision's installation instructions.

5-Metre Ceiling-Mounted Detection Range

The detector also supports ceiling installation, with a specified detection range of 5 metres.

Ceiling mounting changes the effective coverage area and does not support pet immunity.

Narrow 5-Degree Curtain Coverage

The 5-degree detection angle helps concentrate monitoring on a defined security area.

This can be particularly useful where a wide-angle motion detector would cover unnecessary areas.

32 Detection Zones

The detector incorporates 32 detection zones for structured PIR motion detection.

Directional Detection

Directional detection is supported for suitable intrusion detection configurations.

Installers should verify the required movement direction and detection response during commissioning.

Up to 12kg Wall-Mounted Pet Immunity

Hikvision specifies pet immunity up to 12kg for suitable wall-mounted installations.

Pet immunity depends on installation position, detector settings and environmental conditions.

Ceiling-mounted pet immunity is not supported.

Auto and Pet Sensitivity Modes

Auto and Pet sensitivity modes provide configuration flexibility for professional security installers.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance as ambient temperatures change.

Advanced Digital Processing

Digital processing technology helps analyse PIR detection signals.

Sealed Optical Design

Sealed optics help protect internal sensing components from contamination.

Creep-Zone Protection

Creep-zone protection supports detection close to the installed detector.

6,500 Lux White Light Filtering

The integrated white light filter helps reduce interference from strong visible light sources.

Hikvision 433MHz Tri-X Wireless

The detector communicates with compatible Hikvision AX PRO systems using two-way Tri-X wireless technology.

The WB variant operates at 433MHz.

Long-Range Wireless Communication

Hikvision specifies wireless transmission up to 1 kilometre in free-space conditions.

Actual range depends on installation conditions and must be verified on site.

AES-128 Wireless Encryption

AES-128 encryption helps protect wireless communication between the detector and compatible alarm equipment.

Frequency Hopping

Frequency hopping supports wireless communication reliability in suitable radio environments.

Front and Rear Tamper Protection

Front and rear tamper protection help identify unauthorised opening or removal of the detector.

Blue Alarm LED

The blue LED provides visual alarm indication during supported operation and testing.

Anti-Masking LED Indication

Green and orange LED indication helps identify supported masking events.

Wireless Signal Strength Indication

Signal strength indication assists professional installers in selecting a suitable mounting location.

Environmental Temperature Indication

The detector supports environmental temperature indication through compatible system functionality.

Multiple Enrolment Methods

Supported registration methods include power-up, remote ID and QR code enrolment.

Battery-Powered Operation

The detector operates from two CR123A 3V batteries.

Wireless communication eliminates the need for dedicated alarm cabling at the detector location.

Up to Five-Year Standby Battery Life

Hikvision specifies battery endurance of up to five years in standby conditions.

Battery life may be significantly reduced at low temperatures.

IP65 Weather Resistance

The IP65 rating provides protection against dust ingress and water jets under the applicable test conditions.

Outdoor installation must follow Hikvision's mounting and sealing instructions.

Wide Operating Temperature Range

The detector is specified for operation from -25°C to +60°C.

Slim Window and Door Frame Design

Its narrow 29.2mm-wide housing makes the detector suitable for discreet installation near suitable window and door frames.

Wall and Ceiling Mounting

Both wall and ceiling mounting are supported.

An L-shaped mounting adapter is included according to Hikvision's manufacturer documentation.

Ideal Applications

  • Window Protection: Narrow curtain detection across suitable windows.
  • Doorway Protection: Intrusion detection at designated entrances.
  • Building Perimeters: Monitoring suitable external access points.
  • Residential Security: Wireless PIR detection for homes.
  • Commercial Offices: Protecting entry points and defined passages.
  • Retail Premises: Monitoring vulnerable doors and windows.
  • Showrooms: Defined perimeter and access-point detection.
  • Corridors: Narrow-area intrusion detection.
  • Outdoor Entrances: IP65-rated detection where installation conditions are suitable.
  • AX PRO Alarm Upgrades: Adding a compatible wireless anti-masking curtain detector.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDC10AM-EG2-WB.

Series: AX PRO.

Detection Technology: Passive Infrared.

Anti-Masking: Active Infrared.

Wall-Mounted Detection Range: 10m.

Ceiling-Mounted Detection Range: 5m.

Detection Angle: 5°.

Wireless Frequency: 433MHz.

Wireless Technology: Tri-X.

Battery: 2 × CR123A.

Mounting Height: 2–3.5m.

Mounting: Wall or Ceiling.

Environment: Indoor / Outdoor, IP65.

Compatible Systems: Supported Hikvision AX PRO alarm panels and compatible 433MHz wireless receivers.

Recommended Installation Procedure

  • Confirm compatibility with the intended Hikvision AX PRO control panel.
  • Verify that the system supports the 433MHz WB detector variant.
  • Review the official Hikvision datasheet and installation instructions.
  • Identify the window, doorway or perimeter area requiring protection.
  • Determine whether wall or ceiling mounting is appropriate.
  • Use the correct detection range for the selected mounting method.
  • Confirm the mounting height is between 2 and 3.5 metres.
  • Assess the narrow 5-degree curtain detection pattern.
  • Consider the required movement direction.
  • Avoid unsuitable heat sources and environmental disturbances.
  • Check wireless signal strength at the proposed installation location.
  • Confirm the mounting surface is suitable and secure.
  • For outdoor installations, assess water exposure and environmental conditions.
  • Mount the detector according to Hikvision's instructions.
  • Use the supplied L-shaped adapter where appropriate.
  • Ensure the rear tamper mechanism operates correctly.
  • Install the specified CR123A batteries with correct polarity.
  • Enrol the detector using a supported registration method.
  • Confirm communication with the AX PRO control panel.
  • Configure the required alarm zone settings.
  • Select the appropriate sensitivity mode.
  • Configure directional detection where required.
  • Configure and test anti-masking functionality.
  • Perform the manufacturer's recommended walk test.
  • Test the intended curtain detection area.
  • Confirm the alarm control panel receives the expected events.
  • Test front and rear tamper reporting.
  • Verify wireless communication reliability.
  • Check for unwanted alarms under normal environmental conditions.
  • Secure the detector housing and verify weather-resistant installation.
  • Record the final configuration.
  • Complete system commissioning.

Detection Range Notice: Wall-mounted range is 10m; ceiling-mounted range is 5m. The 5-degree curtain detection pattern must be considered when positioning the detector.

Pet Immunity Notice: Pet immunity up to 12kg applies only to suitable wall-mounted installations. Ceiling-mounted pet immunity is not supported.

Outdoor Installation Notice: IP65 weather resistance does not eliminate the need for correct mounting, sealing and environmental assessment.

Wireless Compatibility Notice: The WB model operates at 433MHz. Compatibility with 868MHz-only AX PRO equipment must not be assumed.

Technology Notice: This is a PIR-only detector. It does not incorporate microwave detection.

Battery Notice: Use the specified battery type and follow Hikvision's battery replacement instructions. Keep lithium batteries away from children.

Package Contents

  • 1 × Hikvision DS-PDC10AM-EG2-WB Wireless PIR Anti-Masking Curtain Detector
  • 1 × L-Shaped Mounting Adapter

Package Contents Notice: The detector requires two CR123A batteries. Confirm battery inclusion against the supplied retail packaging. Printed documentation and additional mounting hardware may vary. The AX PRO control panel is sold separately unless otherwise specified.

Frequently Asked Questions

What is the Hikvision DS-PDC10AM-EG2-WB?

It is a wireless PIR anti-masking curtain detector designed for compatible Hikvision AX PRO alarm systems.

Is this a dual-tech detector?

No. It uses passive infrared technology only.

What does AM mean?

AM stands for anti-masking.

Does it support active anti-masking?

Yes. It incorporates active infrared anti-masking protection.

What is the wall-mounted detection range?

10 metres.

What is the ceiling-mounted detection range?

5 metres.

What is the detection angle?

5 degrees.

What is curtain detection?

Curtain detection uses a narrow sensing pattern to monitor defined areas such as windows and doorways.

How many detection zones does it have?

32.

Does it support directional detection?

Yes.

Does it include microwave detection?

No. The DS-PDC10AM-EG2-WB is a PIR-only detector.

Which model includes microwave detection?

The Hikvision DS-PDC10DM-EG2-WB is the separate dual-technology PIR and microwave curtain detector.

Does it support pet immunity?

Yes, up to 12kg in suitable wall-mounted installations.

Does pet immunity work when ceiling-mounted?

No. Hikvision specifies no pet immunity for ceiling mounting.

What sensitivity settings are available?

Auto and Pet.

Does it support digital temperature compensation?

Yes.

Does it have sealed optics?

Yes.

Does it support creep-zone protection?

Yes.

What is the white light filter rating?

6,500 lux.

Is the detector wireless?

Yes. It uses Hikvision Tri-X two-way wireless communication.

What wireless frequency does it use?

433MHz.

What is the maximum wireless range?

Up to 1km in free-space conditions.

Will it work 1km away through walls?

Not necessarily. Actual wireless range depends on building materials and environmental conditions.

Does it support encryption?

Yes. AES-128 encryption is specified.

Does it support frequency hopping?

Yes.

Is it compatible with AX PRO?

Yes, with compatible 433MHz Hikvision AX PRO control panels or supported receivers.

Will it work with an 868MHz-only AX PRO panel?

Compatibility must not be assumed because this WB model operates at 433MHz.

Does it require alarm cabling?

No. It communicates wirelessly with compatible alarm equipment.

What batteries does it use?

Two CR123A batteries.

What is the battery voltage?

3V.

How long does the battery last?

Hikvision specifies up to five years of standby battery life under suitable conditions.

Does cold weather affect battery life?

Yes. Battery life can be significantly reduced at low temperatures.

Are batteries included?

Battery inclusion should be confirmed against the supplied retail packaging.

Does it have tamper protection?

Yes. Front and rear tamper protection are supported.

Does it support signal strength indication?

Yes.

Does it support environmental temperature indication?

Yes.

What colour indicates an alarm?

Blue.

What colours indicate masking?

Green and orange.

Can it be installed outdoors?

Yes. Hikvision specifies indoor and outdoor applications with IP65 weather resistance.

What does IP65 mean?

It indicates protection against dust ingress and water jets under the applicable test conditions.

Can it be installed in direct rain?

It is weather-resistant, but installation must follow Hikvision's mounting and sealing requirements.

What is the operating temperature range?

-25°C to +60°C.

What is the recommended mounting height?

Between 2 and 3.5 metres.

Can it be wall-mounted?

Yes.

Can it be ceiling-mounted?

Yes, with a maximum specified detection range of 5m.

Is a mounting adapter included?

Yes. Hikvision specifies an included L-shaped adapter.

What are the dimensions?

29.2 × 134.4 × 39.5mm.

How much does it weigh?

Approximately 118.5g.

Can it protect windows?

Yes. Its narrow curtain pattern is suitable for appropriately positioned window protection.

Can it protect doorways?

Yes. It can monitor defined doorway areas.

Can it be used for outdoor perimeter protection?

Yes, where the mounting position, detection pattern and environmental conditions are suitable.

Does it include a camera?

No.

Does it record video?

No. It is an intrusion alarm detector.

Does it send smartphone notifications?

Notifications depend on the connected alarm control panel and its configuration.

Does it require professional installation?

Professional installation is recommended to ensure correct positioning, anti-masking operation and wireless communication.

What is the difference between DS-PDC10AM-EG2-WB and DS-PDC10DM-EG2-WB?

The DS-PDC10AM-EG2-WB uses PIR detection with anti-masking, while the DS-PDC10DM-EG2-WB combines PIR and microwave detection.

What is the difference between WB and WE versions?

The WB version operates at 433MHz, while the WE version is intended for compatible 868MHz wireless systems.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDC10AM-EG2-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless curtain detectors, intrusion alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDC10AM-EG2-WB datasheet for complete PIR detection specifications, active anti-masking functionality, wireless communication, battery requirements and installation guidance.

Download Official Hikvision DS-PDC10AM-EG2-WB Datasheet (PDF)

View Official Hikvision AX HYBRID PRO Device Compatibility List

Important: The DS-PDC10AM-EG2-WB is a 433MHz wireless PIR curtain detector with active infrared anti-masking. It supports 10m wall-mounted detection, 5m ceiling-mounted detection, a 5° detection angle and IP65 weather resistance. Pet immunity up to 12kg applies only to suitable wall-mounted installations. This model does not incorporate microwave sensing. Confirm alarm panel compatibility before installation.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch