Hikvision DS-PDP18-EG2(B) AX HYBRID PRO Wired PIR Motion Detector – 18m
The Hikvision DS-PDP18-EG2(B) AX HYBRID PRO Wired PIR Motion Detector is a professional indoor intrusion detector designed to provide reliable motion detection for residential and commercial alarm systems.
Featuring an extended 18-metre detection range, an 85.9° detection angle and advanced digital signal processing, the DS-PDP18-EG2(B) is suitable for monitoring rooms, corridors, offices, retail premises and other protected indoor areas.
The detector uses passive infrared (PIR) technology to detect qualifying changes in infrared energy associated with movement across its detection zones.
Its digital processing technology, automatic sensitivity adjustment and temperature compensation help maintain dependable detection performance under varying indoor conditions.
The DS-PDP18-EG2(B) provides three selectable sensitivity modes: High, Auto and Low.
These settings allow professional installers to configure detection sensitivity according to the protected environment and required pet immunity.
Hikvision specifies pet immunity of up to 5kg in High mode, 10kg in Auto mode and 15kg in Low mode, subject to correct installation.
Pet immunity applies within the manufacturer's specified coverage area of up to 10 metres and should not be assumed across the full 18-metre detection range.
The detector incorporates digital temperature compensation, helping maintain detection performance as indoor temperatures change.
Its sealed optical design helps protect the PIR sensing components from contamination, while creep-zone protection supports detection close to the installed detector.
A 6500 lux white light filter helps reduce unwanted interference from strong visible light sources.
The DS-PDP18-EG2(B) is a hardwired security detector designed for connection to compatible wired alarm control panels.
It features a normally closed alarm output and selectable end-of-line resistor options to support professional alarm wiring configurations.
The detector supports conventional alarm wiring and supervised zone arrangements, subject to the connected alarm panel's requirements.
Its selectable resistor options allow installers to configure suitable alarm and tamper resistance values without relying exclusively on separately installed resistors.
The detector includes front tamper protection to help identify unauthorised opening of the detector housing.
An integrated blue alarm LED provides visual indication during detection and commissioning. The LED can be enabled or disabled using the detector's internal setting.
The DS-PDP18-EG2(B) operates from a 9–16V DC power supply, with a nominal operating voltage of 12V DC.
Its maximum specified current consumption is 12mA, making it suitable for compatible low-voltage wired alarm systems.
Because the detector is hardwired, it does not require batteries or wireless communication.
Designed for indoor applications, the detector supports operating temperatures from -10°C to +55°C.
Its compact housing measures 65.4 × 86.8 × 45.5mm and weighs approximately 68g.
Hikvision specifies an installation height of 1.8–2.4 metres, with approximately 2.1 metres identified as a typical mounting height in the installation manual.
Optional compatible wall and ceiling mounting brackets are available separately.
The DS-PDP18-EG2(B) is suitable for professional Hikvision AX HYBRID PRO installations and other compatible wired alarm systems supporting its power and zone wiring requirements.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Important: The DS-PDP18-EG2(B) is an indoor wired PIR motion detector. It does not contain a camera, microwave sensor or wireless transmitter. It requires a compatible wired alarm control panel and suitable DC power supply.
2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.
Key Features
- 18m PIR Detection Range: Extended motion detection for suitable indoor environments.
- 85.9° Detection Angle: Wide coverage for rooms and internal areas.
- Digital PIR Technology: Microprocessor-based passive infrared motion detection.
- 0.3–2m/s Detection Speed: Detects qualifying movement within the monitored area.
- Three Sensitivity Modes: High, Auto and Low.
- Adjustable Pet Immunity: Up to 5kg, 10kg or 15kg depending on sensitivity mode.
- Digital Temperature Compensation: Helps maintain reliable detection as temperatures change.
- Automatic Sensitivity: Supports adaptive detection in Auto mode.
- Sealed Optics: Helps protect the PIR sensing components.
- Creep Zone Protection: Supports motion detection close to the detector.
- 6500 Lux White Light Filter: Helps reduce interference from strong visible light.
- Wired Alarm Connection: Suitable for compatible conventional wired alarm zones.
- Normally Closed Alarm Output: Supports compatible alarm control panels.
- Selectable EOL Resistors: Professional alarm and tamper wiring configuration.
- NC, SEOL and DEOL Configurations: Supported according to the alarm panel's wiring requirements.
- Front Tamper Protection: Helps detect unauthorised housing opening.
- Blue Alarm LED: Visual detection indication.
- LED Enable/Disable: Internal configuration option.
- 9–16V DC Operation: Compatible with suitable low-voltage alarm power supplies.
- 12mA Maximum Consumption: Low-current wired operation.
- No Batteries Required: Powered through the alarm system's wiring.
- Compact Housing: 65.4 × 86.8 × 45.5mm.
- Lightweight Design: Approximately 68g.
- Indoor Installation: Designed for protected internal environments.
- Mounting Height: 1.8–2.4m.
- Optional Brackets: Compatible wall and ceiling accessories available separately.
- Professional Alarm Compatibility: Suitable for compatible Hikvision AX HYBRID PRO and conventional wired alarm installations.
Technical Specifications
Detailed Features & Benefits
18-Metre PIR Motion Detection
The DS-PDP18-EG2(B) provides passive infrared motion detection across a specified range of up to 18 metres.
Its wide detection angle makes it suitable for protecting indoor rooms and circulation areas.
Advanced Digital PIR Processing
The detector incorporates digital microprocessor-based technology to process infrared detection signals.
This supports reliable motion detection when the detector is installed and configured correctly.
85.9° Detection Coverage
The wide PIR detection angle provides coverage across suitable indoor spaces.
Correct positioning is essential to ensure movement occurs across the detector's intended detection pattern.
High, Auto and Low Sensitivity
Three sensitivity settings allow installers to select the appropriate detection response.
High sensitivity provides the most responsive setting, while Low sensitivity can help reduce unwanted alarms in suitable environments.
Adjustable Pet Immunity
Pet immunity depends on the selected sensitivity mode:
- High: Up to 5kg.
- Auto: Up to 10kg.
- Low: Up to 15kg.
Pet immunity is specified within 10 metres and requires correct mounting and configuration.
Digital Temperature Compensation
Digital temperature compensation helps maintain PIR detection performance as ambient indoor temperatures change.
Automatic Sensitivity Adjustment
Auto mode supports adaptive sensitivity for suitable environments.
Sealed Optical Design
Sealed optics help protect the detector's internal sensing components.
Creep Zone Protection
Creep-zone protection helps extend detection coverage into the area close to the detector.
6500 Lux White Light Filtering
The detector incorporates a white light filter rated at 6500 lux.
This helps reduce interference from strong visible lighting.
Professional Wired Alarm Integration
The DS-PDP18-EG2(B) uses a conventional wired alarm connection.
It is suitable for compatible wired and hybrid alarm systems supporting its normally closed output and power requirements.
Selectable End-of-Line Resistors
Integrated resistor selection allows installers to configure supported alarm and tamper resistance values.
The selected values must match the connected alarm panel's zone configuration.
NC, SEOL and DEOL Wiring
The detector supports normally closed, single end-of-line and double end-of-line wiring arrangements.
Installation must follow the official Hikvision wiring diagrams.
Front Tamper Protection
The detector incorporates a front tamper mechanism to help identify unauthorised opening of its housing.
Blue Alarm LED
An integrated blue LED provides visual alarm indication during operation and commissioning.
Selectable LED Operation
The LED can be enabled or disabled using the detector's internal configuration.
9–16V DC Power Supply
The detector operates from a suitable regulated 9–16V DC power supply.
The nominal operating voltage is 12V DC.
Low Current Consumption
With maximum current consumption of 12mA, the detector is suitable for compatible professional alarm power supplies.
No Battery Maintenance
As a wired detector, the DS-PDP18-EG2(B) does not require replaceable detector batteries.
Compact Housing
The detector measures 65.4 × 86.8 × 45.5mm and weighs approximately 68g.
Flexible Mounting
Hikvision specifies installation heights between 1.8 and 2.4 metres.
Optional compatible wall and ceiling brackets are available separately.
Professional AX HYBRID PRO Compatibility
The detector is suitable for compatible AX HYBRID PRO installations with conventional wired zone inputs.
Compatibility with the exact alarm control panel should be confirmed before installation.
Ideal Applications
- Residential Alarm Systems: Indoor motion detection for suitable rooms.
- Commercial Offices: Protecting internal office spaces.
- Retail Stores: Motion detection in protected shop areas.
- Warehouses: Monitoring suitable indoor zones.
- Showrooms: Detecting qualifying movement in protected areas.
- Hallways and Corridors: Monitoring internal movement routes.
- Wired Alarm Upgrades: Replacing compatible conventional PIR detectors.
- AX HYBRID PRO Systems: Professional wired motion detection.
- Commercial Security Installations: Low-current wired intrusion detection.
Compatibility & Installation
Manufacturer: Hikvision.
Model: DS-PDP18-EG2(B).
Series: AX HYBRID PRO.
Detection: Passive Infrared.
Range: 18m.
Angle: 85.9°.
Connection: Conventional wired alarm zone.
Alarm Output: Normally closed.
Power: 9–16V DC.
Mounting: Indoor installation.
Installation Height: 1.8–2.4m.
Professional Installation: Recommended.
Recommended Installation Procedure
- Confirm compatibility with the intended alarm control panel.
- Review the official Hikvision datasheet and installation manual.
- Identify the indoor area requiring motion detection.
- Assess the required detection coverage.
- Select a suitable mounting position between 1.8 and 2.4 metres.
- Use approximately 2.1 metres where appropriate.
- Avoid mounting near unsuitable heat sources or direct sunlight.
- Avoid locations where moving objects may cause unwanted alarms.
- Position the detector to monitor the intended movement routes.
- Consider the required pet immunity and sensitivity setting.
- Confirm that pet immunity is only specified within 10 metres.
- Prepare suitable alarm cabling.
- Confirm the alarm panel provides a suitable 9–16V DC supply.
- Check the complete alarm system's power budget.
- Mount the detector securely.
- Connect the alarm, tamper and power terminals according to Hikvision's wiring diagrams.
- Select the appropriate EOL resistor configuration.
- Ensure the selected resistor values match the alarm panel's zone programming.
- Configure High, Auto or Low sensitivity.
- Enable or disable the alarm LED as required.
- Apply power and allow the detector to complete its self-test.
- Perform the manufacturer's recommended walk test.
- Verify motion detection throughout the intended coverage area.
- Confirm the alarm control panel receives the expected alarm events.
- Test front tamper operation.
- Check for unacceptable unwanted alarms.
- Record the final sensitivity and wiring settings.
- Complete commissioning and provide operating information to the system owner.
Installation Notice: This is an indoor detector. Do not install it outdoors or in areas exposed to rain or excessive moisture.
Pet Immunity Notice: Pet immunity depends on the selected sensitivity mode, correct installation and the manufacturer's specified coverage limitations.
Wiring Notice: The detector uses conventional alarm wiring. It is not a Speed-X bus detector and must not be connected directly to a Speed-X interface.
Power Notice: The DS-PDP18-EG2(B) requires low-voltage DC power. Do not connect it directly to 230V AC mains power.
Package Contents
- 1 × Hikvision DS-PDP18-EG2(B) Wired PIR Motion Detector
Package Contents Notice: Mounting hardware and printed documentation may vary by supplied packaging. Alarm control panel, cabling, power supply and optional brackets are sold separately unless otherwise specified.
Frequently Asked Questions
What is the Hikvision DS-PDP18-EG2(B)?
It is a wired passive infrared motion detector designed for compatible indoor alarm systems.
Is it part of the AX HYBRID PRO range?
It is suitable for compatible Hikvision AX HYBRID PRO installations using conventional wired alarm zones.
What is the maximum detection range?
18 metres.
What is the detection angle?
85.9°.
What movement speed can it detect?
0.3–2m/s.
Does it use PIR technology?
Yes. It uses passive infrared motion detection.
Does it include microwave detection?
No. This model uses PIR technology.
Does it include a camera?
No. It is a motion detector without an integrated camera.
Does it detect glass breaking?
No. It does not include an acoustic glass-break sensor.
Is the detector wireless?
No. It is a wired detector.
Does it support pet immunity?
Yes. Pet immunity depends on the selected sensitivity mode.
What is the pet immunity in High mode?
Up to 5kg.
What is the pet immunity in Auto mode?
Up to 10kg.
What is the pet immunity in Low mode?
Up to 15kg.
Does pet immunity apply across the full 18m range?
No. Hikvision specifies pet immunity within 10 metres.
Will it ignore every pet below the specified weight?
No. Pet immunity depends on installation, sensitivity and animal movement.
What sensitivity modes are available?
High, Auto and Low.
Does it support automatic sensitivity?
Yes.
Does it support digital temperature compensation?
Yes.
Does it have sealed optics?
Yes.
Does it support creep-zone protection?
Yes.
What is the white light filter rating?
6500 lux.
Can it connect to AX HYBRID PRO?
Yes, provided the control panel supports its conventional wired alarm connection and power requirements.
Can it connect to a third-party wired alarm panel?
It may be compatible with suitable third-party alarm panels supporting its normally closed output and power requirements.
Does it use Speed-X bus communication?
No. This model uses conventional wired alarm signalling.
What type of alarm output does it provide?
Normally closed.
Does it support end-of-line resistors?
Yes. Selectable alarm and tamper resistor options are provided.
Can it support double end-of-line wiring?
Yes. Hikvision documents DEOL wiring arrangements.
Does it have tamper protection?
Yes. Front tamper protection is supported.
Does it have rear tamper protection?
Rear tamper protection is not specified for this model.
What colour is the alarm LED?
Blue.
Can the LED be disabled?
Yes. The installation manual documents an LED on/off setting.
What power supply does it require?
9–16V DC.
What is the nominal operating voltage?
12V DC.
What is the maximum current consumption?
12mA.
Does it require batteries?
No. It operates from a wired DC power supply.
What is the recommended mounting height?
Between 1.8 and 2.4 metres.
What is the typical mounting height?
Approximately 2.1 metres.
Can it be installed outdoors?
No. It is intended for indoor installation.
Can it be installed on a ceiling?
Optional compatible ceiling mounting accessories are available. Installation must follow Hikvision's instructions.
Are mounting brackets included?
Hikvision lists wall and ceiling brackets as optional accessories.
What is the operating temperature range?
-10°C to +55°C.
What are the dimensions?
65.4 × 86.8 × 45.5mm.
How much does it weigh?
Approximately 68g.
Does it support EN Grade 2 installations?
Hikvision's installation documentation identifies Security Grade 2 and Environmental Class II. Compliance of the complete system must be assessed separately.
Can it send smartphone notifications?
Notifications depend on the connected alarm control panel and its configuration.
Does it require professional installation?
Professional installation is recommended to ensure correct wiring, detector placement and sensitivity adjustment.
Does Civic Electronic provide alarm monitoring?
No. Civic Electronic supplies security equipment and technical support but does not provide alarm monitoring services.
Where can I buy the Hikvision DS-PDP18-EG2(B) in Australia?
Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.
- Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
- Hikvision Training Centre: Professional product knowledge and installer training.
- Australian Warranty Support: Warranty assistance for eligible Hikvision products.
- Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
- Technical Support: Assistance with compatible Hikvision equipment selection.
- Professional Installer Support: Support for security technicians and system integrators.
- Australia-Wide Delivery: Shipping available throughout Australia.
- Free Standard Shipping: Available on eligible orders of $300 or more.
- 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For Hikvision AX HYBRID PRO wired PIR detectors, alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.
Official Hikvision Manufacturer Documentation
Review the official Hikvision DS-PDP18-EG2(B) datasheet and installation manual for complete PIR detection specifications, sensitivity settings, pet immunity limitations, EOL resistor wiring and installation instructions.
Download Official Hikvision DS-PDP18-EG2(B) Datasheet (PDF)
Download Official Hikvision DS-PDP18-EG2 Installation Manual (PDF)
Important: The DS-PDP18-EG2(B) is an indoor wired PIR motion detector featuring 18m detection, 85.9° coverage, selectable sensitivity and mode-dependent pet immunity. It operates from 9–16V DC and supports conventional wired alarm zones with selectable EOL resistors. Confirm compatibility with the intended control panel and perform a complete walk test before commissioning.
Genuine Product Assurance, We are officially an authorized reseller of Hikvision
Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.
Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.
1. Free and Express Shipping
- Free Standard Shipping applies to all orders valued at $300 or more.
- Express Shipping is available for an additional $65 per order.
Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:
2. Order Processing
- Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
- Orders are processed Monday to Friday, excluding weekends and public holidays.
- Tracking information will be provided via email after 11:00 AM on the day the order is shipped.
All orders are dispatched using the most efficient postage method available to ensure timely delivery.
3. Delivery Timeframes
- Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
- Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
- Standard Shipping: Please allow up to 10 business days from dispatch.
If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.
4. Delivery Requirements and Limitations
- All deliveries require a signature upon receipt.
- Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
- If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
- We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.
Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.
We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.
If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.
5. Tracking Your Order
Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.
To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.
6. Additional Information
We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.
Price Beat Guarantee
At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.
How It Works
If you find a cheaper price, simply:
- Provide a link to the competitor's advertised product
- Confirm the seller is an authorised Australian reseller
- Submit your request before placing your order
Our team will verify the details and respond promptly.
Eligibility Requirements
To qualify for our Price Beat Guarantee, the following conditions must be met:
- The competitor must be an authorised Australian reseller
- The seller must operate as a legitimate Australian retail business
- The item must be identical (same brand, model number and specifications)
- The product must be brand new and currently in stock
- The price must be publicly advertised (not a private quote or member-only offer)
- The advertised price must include GST
- Shipping costs must be included in the total comparison
- The competitor must supply Australian warranty support
Exclusions
Our Price Beat Guarantee does not apply to:
- Dropshippers or intermediary sellers who do not physically stock the product
- Sellers operating without a verifiable Australian retail presence
- Businesses with no registered retail location or identifiable trading address
- Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
- Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
- Refurbished, used or open-box items
- Pricing errors or misprints
- Bundle deals, bonus offers or cashback promotions
- Trade, bulk or special contract pricing
Important Conditions
- Price Beat requests must be approved prior to purchase
- Approved offers are valid for 24 hours only
- Civic Electronic reserves the right to verify reseller authorisation status
- We reserve the right to decline requests that do not meet the above criteria
- This policy may be modified or withdrawn at any time without notice
Why Buy From Civic Electronic?
- 100% Genuine Products
- Authorised Australian Reseller
- Local Australian Warranty
- Real Stock, Not Dropshipped
- Expert Technical Support
- Fast & Secure Dispatch
Our Range of Accessories
Surveillance/CCTV Hard Drive for DVR/NVR 2TB
Western DigitalSurveillance Hard Drive for DVR/NVR 2TB Product brand is subject to change depending on stock availability. This product is supplied as an add-o...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 4TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 4TB Product brand is subject to change depending on stock availab...
View full detailsCAT6 Patch Lead Network Cable 20m
Cable AUCAT6 Patch Lead Network Cable Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmissio...
View full detailsCAT6 Patch Lead Network Cable 30m
Cable AUCAT6 Patch Lead Network Cable 30m Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmi...
View full detailsSurveillance/CCTV Hard Drive for DVR/NVR 3TB
Western DigitalWestern Digital WD Purple Or Seagate Skyhawk Surveillance Hard Drive for DVR/NVR 3TB Product brand is subject to change depending on stock availab...
View full details