Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDP18-HM-WB AX PRO Wireless Outdoor Double PIR Detector – 18m, IP65, 433MHz

Save 22% Save 22%
Original price $186.00
Original price $186.00 - Original price $186.00
Original price $186.00
Current price $146.00
$146.00 - $146.00
Current price $146.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDP18-HM-WB AX PRO Wireless Outdoor Double PIR Detector – 18m, IP65, 433MHz

The Hikvision DS-PDP18-HM-WB AX PRO Wireless Double PIR Detector is a professional indoor and outdoor intrusion detector designed to provide reliable motion detection across residential, commercial and industrial security applications.

Featuring dual passive infrared (PIR) detection technology, an extended 18-metre detection range, 90° detection coverage and an IP65 weather-resistant housing, the DS-PDP18-HM-WB is suitable for protecting external areas, building approaches and other vulnerable locations.

Unlike conventional single PIR detectors, the double PIR design incorporates two passive infrared sensing elements to support dependable detection of qualifying movement within the protected area.

The detector provides 118 detection zones and supports movement detection speeds from 0.3 to 2 metres per second.

Hikvision specifies a maximum detection distance of 18 metres, with a 16-metre detection distance referenced under EN 50131-2-2.

Its flexible installation design supports both high and low mounting configurations, allowing professional installers to select an appropriate detection pattern according to the protected environment.

High mounting supports installation between 2.5 and 3 metres, with a typical installation height of 2.7 metres.

Low mounting supports installation between 0.8 and 1.2 metres, with a typical installation height of 1 metre.

The detector incorporates a dedicated mounting-height adjustment mechanism to support these configurations.

The DS-PDP18-HM-WB also features pet immunity up to 24kg, helping reduce unwanted alarms caused by suitable animals when the detector is correctly positioned and configured.

Its selectable Auto and Pet sensitivity modes allow installers to adapt PIR detection to the intended environment.

Additional detection technologies include digital temperature compensation, digital signal processing, sealed optics and a 20,000 lux white light filter.

These features help support stable detection performance in environments exposed to changing temperatures and strong ambient lighting.

The detector also supports directional detection, allowing compatible system configurations to distinguish qualifying movement direction according to the manufacturer's supported functionality.

For wireless communication, the DS-PDP18-HM-WB uses Hikvision's Tri-X two-way wireless technology operating at 433MHz.

The manufacturer specifies a wireless communication distance of up to 1 kilometre in free-space conditions.

Actual transmission range depends on building materials, mounting position, radio interference and surrounding environmental conditions.

Wireless communication incorporates AES-128 encryption and frequency hopping to support secure and reliable communication with compatible Hikvision alarm equipment.

The detector supports multiple enrolment methods, including power-up registration, remote device ID and QR code enrolment.

Its wireless signal strength indication helps professional installers identify suitable mounting positions before completing installation.

The DS-PDP18-HM-WB includes front and rear tamper protection, helping identify interference with the detector housing or mounting arrangement.

An integrated blue LED provides visual alarm indication during supported testing and operation.

The detector is powered by two CR123A batteries, with a manufacturer-specified battery life of up to 5 years under the stated operating conditions.

Its battery-powered design eliminates the need to install a dedicated power cable at the detector location.

The robust IP65-rated housing provides protection against dust ingress and water jets, making the detector suitable for appropriately installed outdoor applications.

Hikvision specifies an operating temperature range of -25°C to +60°C, supporting installation in a wide range of environmental conditions.

The detector measures 67.3 × 141.6 × 60mm and weighs approximately 301g.

An adjustment bracket is included, providing additional flexibility when positioning the detector for the intended coverage area.

The DS-PDP18-HM-WB is suitable for compatible Hikvision AX PRO security systems supporting the 433MHz WB wireless detector range.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDP18-HM-WB is a 433MHz wireless double PIR detector. It is not a microwave detector, PIR camera or standalone alarm system. Confirm compatibility with the intended Hikvision control panel before installation.

Hikvision DS-PDP18-HM-WB AX PRO Wireless Double PIR Detector 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.

Key Features

  • Double PIR Detection: Two passive infrared sensing elements for professional intrusion detection.
  • 18m Detection Range: Extended motion detection coverage for suitable indoor and outdoor environments.
  • 90° Detection Angle: Wide-area motion detection.
  • 118 Detection Zones: Structured PIR detection coverage.
  • 16m EN Detection Reference: Detection distance specified under EN 50131-2-2.
  • 0.3–2m/s Detectable Speed: Designed to detect qualifying movement.
  • Up to 24kg Pet Immunity: Helps reduce unwanted alarms caused by suitable animals.
  • Auto and Pet Sensitivity: Selectable PIR sensitivity modes.
  • Directional Detection: Supports directional motion detection functionality.
  • High and Low Mounting: Flexible installation-height configurations.
  • High Mounting Height: 2.5–3m.
  • Low Mounting Height: 0.8–1.2m.
  • Mounting Adjustment Lever: Supports the selected installation configuration.
  • IP65 Weather Resistance: Protection against dust and water jets.
  • 20,000 Lux White Light Filter: Helps reduce interference from strong visible light.
  • Digital Temperature Compensation: Supports detection performance across changing temperatures.
  • Digital Signal Processing: Helps improve PIR detection reliability.
  • Sealed Optics: Protects the optical detection components.
  • 433MHz Tri-X Wireless: Designed for compatible Hikvision AX PRO systems.
  • Two-Way RF Communication: Supports communication with the alarm control panel.
  • Up to 1km Wireless Range: Manufacturer-specified free-space transmission distance.
  • AES-128 Encryption: Secures supported wireless communication.
  • Frequency Hopping: Supports reliable wireless transmission.
  • Multiple Enrolment Methods: Power-up, remote ID and QR code.
  • Front and Rear Tamper Protection: Helps detect interference with the detector.
  • Signal Strength Indication: Assists with installation and commissioning.
  • Environmental Temperature Indication: Supported detector function.
  • Blue Alarm LED: Visual alarm indication.
  • Battery Powered: Uses two CR123A batteries.
  • Up to 5-Year Battery Life: Manufacturer-specified operating endurance.
  • Wide Operating Temperature: -25°C to +60°C.
  • Adjustment Bracket Included: Supports professional installation.
  • Indoor and Outdoor Applications: Suitable for correctly installed protected areas.

Technical Specifications

Brand Hikvision
Model DS-PDP18-HM-WB
Product Series AX PRO
Product Type Wireless Double PIR Detector
Detection Method Double Passive Infrared
Detection Range 18m
EN 50131-2-2 Detection Range 16m
Detection Angle 90°
Detection Zones 118
Detectable Movement Speed 0.3–2m/s
Sensitivity Auto / Pet
Pet Immunity Up to 24kg
Directional Detection Supported
White Light Filter 20,000 Lux
Digital Temperature Compensation Supported
Digital Processing Supported
Sealed Optics Supported
Tamper Protection Front and Rear
Environmental Temperature Indication Supported
Signal Strength Indication Supported
LED Indicator Blue (Alarm)
Wireless Technology Hikvision Tri-X
Communication Method Two-Way RF Wireless
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 1km (Free Space)
Frequency Hopping Supported
Enrolment Methods Power-Up / Remote ID / QR Code
Power Supply Battery Powered
Battery Type 2 × CR123A
Typical Voltage 3V
Battery Life Up to 5 Years
IP Rating IP65
Operating Temperature -25°C to +60°C
Storage Temperature -25°C to +60°C
Operating Humidity 10%–90%
Dimensions (W × H × D) 67.3 × 141.6 × 60mm
Weight 301g
High Mounting Height 2.5–3m (Typical 2.7m)
Low Mounting Height 0.8–1.2m (Typical 1m)
Mounting Method Wall
Installation Environment Indoor / Outdoor
Adjustment Bracket Included

Detailed Features & Benefits

Advanced Double PIR Detection Technology

The DS-PDP18-HM-WB incorporates dual passive infrared sensing elements to provide professional motion detection.

The double PIR design helps improve detection performance when monitoring suitable indoor and outdoor environments.

Correct mounting, sensitivity configuration and testing remain essential for dependable operation.

Extended 18-Metre Detection Range

The detector provides motion detection coverage up to 18 metres.

This extended range makes it suitable for monitoring building approaches, outdoor walkways, residential yards and other appropriate protected areas.

Hikvision also specifies a 16-metre detection distance under EN 50131-2-2.

Wide 90° Detection Coverage

The detector provides a 90° detection angle.

Its 118 detection zones help provide structured motion detection across the protected area.

High and Low Mounting Configurations

The DS-PDP18-HM-WB supports two installation-height configurations.

High mounting: 2.5–3m, with a typical height of 2.7m.

Low mounting: 0.8–1.2m, with a typical height of 1m.

The detector includes a mounting-height adjustment mechanism that must be configured for the selected installation.

Directional Detection

The detector supports directional detection functionality.

This allows compatible alarm system configurations to use supported directional movement detection features.

Available options depend on the connected control panel and firmware.

Up to 24kg Pet Immunity

Hikvision specifies pet immunity up to 24kg.

This helps reduce unwanted motion alarms from suitable animals when the detector is correctly installed and configured.

Pet immunity does not guarantee that every animal movement will be ignored.

Auto and Pet Sensitivity Settings

The detector supports Auto and Pet PIR sensitivity modes.

Professional installers can select the appropriate setting according to the protected environment.

IP65 Weather-Resistant Housing

The DS-PDP18-HM-WB features an IP65-rated enclosure.

This provides protection against dust ingress and water jets, supporting suitable outdoor installations.

IP65 does not mean the detector is designed for immersion in water.

Wide Operating Temperature Range

The detector supports operating temperatures from -25°C to +60°C.

This allows installation in a wide range of suitable indoor and outdoor environments.

20,000 Lux White Light Filtering

The detector incorporates white light filtering rated at 20,000 lux.

This helps reduce interference caused by strong visible light.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance as ambient temperatures change.

Digital Signal Processing

The detector incorporates digital processing technology to support reliable intrusion detection.

Sealed Optical Design

Sealed optics help protect the detector's optical sensing components from environmental contamination.

Hikvision Tri-X Wireless Communication

The DS-PDP18-HM-WB uses Hikvision Tri-X two-way wireless technology.

It is designed to communicate with compatible Hikvision alarm control panels operating at 433MHz.

Up to 1km Wireless Transmission

Hikvision specifies a wireless communication range of up to 1 kilometre in free-space conditions.

Actual wireless performance depends on installation conditions, obstacles and radio interference.

AES-128 Wireless Encryption

The detector supports AES-128 encryption to help protect supported wireless communication.

Frequency Hopping

Frequency hopping supports wireless communication reliability in suitable environments.

Multiple Enrolment Methods

The detector supports power-up, remote ID and QR code enrolment.

Available enrolment methods depend on the compatible alarm system.

Wireless Signal Strength Indication

The integrated signal strength indication helps installers assess communication quality before completing installation.

Front and Rear Tamper Protection

The detector includes front and rear tamper protection.

These functions help identify interference with the detector housing or mounting arrangement.

Blue Alarm LED

An integrated blue LED provides visual alarm indication during supported operation and testing.

Up to Five Years of Battery Life

The detector operates using two CR123A batteries.

Hikvision specifies battery endurance of up to five years under the manufacturer's stated conditions.

Actual battery life depends on detection activity, wireless conditions, environmental temperature and battery characteristics.

Adjustment Bracket Included

An adjustment bracket is included with the detector.

This provides flexibility when positioning the device for the required detection coverage.

Professional AX PRO Integration

The DS-PDP18-HM-WB is intended for compatible Hikvision AX PRO wireless alarm installations.

The exact alarm panel must support the 433MHz WB model and the required detector features.

Ideal Applications

  • Residential Perimeter Security: Monitoring suitable outdoor approaches to homes.
  • Building Entrances: Detecting qualifying movement near external access points.
  • Driveways: Monitoring appropriate driveway approaches within the detector's coverage.
  • Outdoor Walkways: Detecting movement along protected pedestrian routes.
  • Commercial Premises: Additional intrusion detection around buildings.
  • Warehouses: Monitoring suitable internal or external areas.
  • Industrial Facilities: Wireless motion detection in appropriate protected locations.
  • Residential Yards: Additional intrusion detection where correct coverage can be achieved.
  • AX PRO Alarm Upgrades: Adding outdoor double PIR detection to compatible systems.
  • Professional Security Installations: Extended-range wireless motion detection.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDP18-HM-WB.

Series: AX PRO.

Detection Technology: Double passive infrared.

Detection Range: 18m.

Detection Angle: 90°.

Wireless Frequency: 433MHz.

Wireless Technology: Tri-X.

Power: 2 × CR123A batteries.

Weather Resistance: IP65.

Mounting: Indoor or outdoor wall installation.

High Mounting: 2.5–3m.

Low Mounting: 0.8–1.2m.

Compatible Systems: Supported Hikvision AX PRO alarm control panels with compatible 433MHz wireless communication.

Recommended Installation Procedure

  • Confirm compatibility with the intended Hikvision AX PRO control panel.
  • Verify support for the DS-PDP18-HM-WB 433MHz model.
  • Review Hikvision's official datasheet and installation guide.
  • Identify the area requiring intrusion detection.
  • Assess the intended detection range and coverage angle.
  • Determine whether high or low mounting is appropriate.
  • For high mounting, select a height between 2.5 and 3m.
  • For low mounting, select a height between 0.8 and 1.2m.
  • Configure the detector's mounting-height adjustment mechanism.
  • Select a secure and stable mounting surface.
  • Avoid positions where moving vegetation may cause unwanted alarms.
  • Consider nearby heat sources and rapidly changing environmental conditions.
  • Avoid directing the detector towards unsuitable reflective or moving objects.
  • Confirm that the detector has an appropriate view of the protected area.
  • Assess the wireless signal strength at the intended mounting location.
  • Install the mounting base or supplied adjustment bracket according to Hikvision's instructions.
  • Ensure the rear tamper mechanism is correctly engaged.
  • Install the specified CR123A batteries according to the manufacturer's instructions.
  • Enrol the detector using a supported registration method.
  • Confirm successful communication with the alarm control panel.
  • Configure the required PIR sensitivity.
  • Configure supported directional detection settings where appropriate.
  • Enable Pet sensitivity where suitable for the installation.
  • Perform the manufacturer's recommended walk test.
  • Verify detection performance across the intended coverage area.
  • Confirm that the alarm control panel receives detection events.
  • Verify front and rear tamper reporting.
  • Confirm that environmental conditions do not cause unacceptable unwanted alarms.
  • Ensure the detector housing is properly closed and sealed.
  • Record the final installation settings.
  • Provide the system owner with operating and maintenance information.

Mounting Notice: High and low mounting configurations have different detection patterns. Select the appropriate setting and installation height according to Hikvision's instructions.

Pet Immunity Notice: The 24kg pet immunity specification is conditional on correct installation and configuration.

Weather Resistance Notice: IP65 protection requires correct installation and an intact enclosure. The detector must not be submerged.

Wireless Notice: The 1km transmission range is specified for free-space conditions and is not guaranteed through buildings or other obstructions.

Compatibility Notice: The DS-PDP18-HM-WB operates at 433MHz. Compatibility with 868MHz-only alarm panels must not be assumed.

Package Contents

  • 1 × Hikvision DS-PDP18-HM-WB Wireless Double PIR Detector
  • 1 × Adjustment Bracket

Package Contents Notice: The detector uses two CR123A batteries. Confirm battery inclusion and any additional mounting hardware against the supplied retail packaging. The AX PRO alarm control panel is sold separately unless otherwise specified.

Frequently Asked Questions

What is the Hikvision DS-PDP18-HM-WB?

It is a wireless double PIR motion detector designed for compatible Hikvision AX PRO alarm systems.

Is this an outdoor PIR detector?

Yes. It has an IP65-rated housing and supports indoor and outdoor installation.

What does double PIR mean?

It means the detector incorporates two passive infrared sensing elements.

Does it use microwave detection?

No. This model uses passive infrared detection.

Does it include a camera?

No. It is a motion detector without an integrated camera.

What is the maximum detection range?

18 metres.

Why does the manual also mention 16 metres?

The manual specifies 16 metres under EN 50131-2-2, while the general maximum detection range is 18 metres.

What is the detection angle?

90°.

How many detection zones are provided?

118.

What movement speed can it detect?

0.3–2m/s.

Does it support pet immunity?

Yes. Hikvision specifies pet immunity up to 24kg.

Will it ignore every animal weighing less than 24kg?

No. Pet immunity depends on installation, sensitivity settings and animal movement.

What sensitivity modes are available?

Auto and Pet.

Does it support directional detection?

Yes. Directional detection is a manufacturer-specified feature.

What is the high mounting height?

2.5–3 metres, with a typical mounting height of 2.7 metres.

What is the low mounting height?

0.8–1.2 metres, with a typical mounting height of 1 metre.

Can I install it at any height?

No. Installation should follow the manufacturer's supported high or low mounting configurations.

Does it include an adjustment bracket?

Yes. Hikvision specifies that an adjustment bracket is included.

What is the IP rating?

IP65.

Is IP65 suitable for outdoor installation?

Yes, when the detector is installed correctly and environmental conditions remain within its specifications.

Can it be submerged in water?

No. IP65 does not provide protection against immersion.

What is the operating temperature range?

-25°C to +60°C.

Does it support digital temperature compensation?

Yes.

Does it have sealed optics?

Yes.

What is the white light filter rating?

20,000 lux.

Is the DS-PDP18-HM-WB wireless?

Yes. It uses Hikvision Tri-X two-way wireless technology.

What wireless frequency does it use?

433MHz.

What is the difference between the WB and WE versions?

The WB version operates at 433MHz, while the WE version operates at 868MHz. Confirm compatibility with the intended alarm panel.

What is the maximum wireless range?

Up to 1km in free-space conditions.

Does it support AES encryption?

Yes. AES-128 encryption is specified.

Does it support frequency hopping?

Yes.

Can it connect to Hikvision AX PRO?

Yes, provided the exact control panel supports the 433MHz DS-PDP18-HM-WB model.

Can it work without an alarm hub?

A compatible alarm control panel is required for normal AX PRO system operation.

How is the detector enrolled?

Supported methods include power-up, remote ID and QR code enrolment.

Does it have a wireless signal strength indicator?

Yes.

Does it support environmental temperature indication?

Yes.

What batteries does it use?

Two CR123A batteries.

How long do the batteries last?

Hikvision specifies up to five years under its stated operating conditions.

Are the batteries replaceable?

Yes.

Does it require mains power?

No. The detector is battery-powered.

Does it have tamper protection?

Yes. Front and rear tamper protection are supported.

What colour is the alarm LED?

Blue.

What are the detector dimensions?

67.3 × 141.6 × 60mm.

How much does it weigh?

Approximately 301g.

Can it be used for driveway security?

It may be suitable for monitoring a driveway approach when the detector can be positioned within its supported detection coverage.

Can it be installed on an external wall?

Yes, provided the mounting surface and environmental conditions are suitable.

Can it send smartphone notifications?

Supported notifications depend on the connected alarm control panel and its configuration.

Does it record video?

No. It is a PIR motion detector, not a CCTV camera.

Does it require professional installation?

Professional installation is recommended to ensure correct mounting height, detection coverage and wireless communication.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDP18-HM-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO outdoor PIR detectors, alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDP18-HM-WB datasheet and quick start guide for detection coverage, mounting configurations, wireless specifications, battery information and installation instructions.

Download Official Hikvision DS-PDP18-HM-WB Datasheet (PDF)

Download Official Hikvision DS-PDP18-HM-WB Quick Start Guide (PDF)

Important: The DS-PDP18-HM-WB is an IP65-rated wireless double PIR detector featuring 18m detection, 90° coverage, 24kg pet immunity, high and low mounting configurations and 433MHz Tri-X communication. It uses two CR123A batteries and requires a compatible Hikvision alarm control panel. Confirm wireless frequency compatibility and perform a complete walk test before commissioning.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch