Hikvision DS-PDPC12P-EG2 AX HYBRID PRO Wired PIR Camera Detector – 12m, 1080P
The Hikvision DS-PDPC12P-EG2 AX HYBRID PRO Wired PIR Camera Detector combines advanced passive infrared motion detection with a built-in high-definition camera to provide professional intrusion detection and visual alarm verification.
Designed specifically for compatible Hikvision AX HYBRID PRO alarm systems, this intelligent detector uses Hikvision's high-speed Speed-X wired bus technology to transmit alarm events and captured images to the connected alarm control panel.
Unlike conventional PIR detectors that only report movement, the DS-PDPC12P-EG2 can capture images associated with an alarm event, helping users and security personnel visually assess activity within the protected area.
The detector provides a 12-metre PIR detection range with an 85.9° detection angle and 52 detection zones.
Its integrated camera supports image resolutions of 1920 × 1080 (Full HD), 1280 × 720 and 640 × 480, allowing supported image verification settings to be selected according to the system configuration.
The camera features a wide 109° horizontal and 60° vertical field of view, providing visual coverage of the protected area.
For low-light environments, the detector incorporates infrared illumination with a specified range of up to 12 metres.
The integrated day/night function supports colour imaging during suitable lighting conditions and black-and-white imaging when infrared illumination is required.
The DS-PDPC12P-EG2 supports pet immunity up to 30kg, helping reduce unwanted motion alarms from suitable household pets when installed and configured correctly.
Its Smart Environmental Control (SEC) technology combines advanced digital signal processing and 3D optics to help maintain reliable detection performance under varying indoor conditions.
The detector also includes digital temperature compensation, sealed optics, creep zone protection and a 6500 lux white light filter.
Three selectable PIR sensitivity modes—Auto, High and Pet—allow professional installers to configure detection according to the installation environment.
The built-in camera uses a polarising infrared lens design intended to provide more uniform infrared illumination and improved image quality during low-light alarm events.
An integrated image memory buffer supports temporary storage of captured images as part of the detector's alarm verification functions.
Supported alarm images can be delivered through a compatible AX HYBRID PRO system to authorised users or an appropriately configured alarm receiving centre.
Image delivery and remote viewing depend on the control panel, firmware, network connection, application configuration and any separately arranged monitoring services.
The detector uses AES-128 encryption to protect supported communication over its wired Speed-X bus connection.
Hikvision specifies a maximum transmission distance of 1 kilometre for the detector's bus interface, subject to the applicable installation requirements.
The DS-PDPC12P-EG2 operates from a 9–16V DC power supply, with a nominal voltage of 12V DC and maximum current consumption of 100mA.
Its wired design eliminates the need for detector batteries and is suitable for professional security installations where reliable alarm cabling is available.
The detector includes front and rear tamper protection to help identify unauthorised opening or removal of the device.
Its compact housing measures 73 × 130.5 × 56.7mm and weighs approximately 195g.
Hikvision specifies indoor wall mounting at a height of 1.8–2.4 metres, with approximately 2.2 metres recommended in the installation manual.
The DS-PDPC12P-EG2 is ideal for professional residential, commercial and retail security applications requiring motion detection with visual alarm verification.
Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.
Important: The DS-PDPC12P-EG2 is a wired Speed-X bus PIR camera detector. It is not a standalone CCTV camera, conventional analogue PIR detector or wireless AX PRO device. A compatible AX HYBRID PRO control panel and correct bus connection are required.
2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.
Key Features
- Genuine Hikvision AX HYBRID PRO Detector: Designed for compatible professional hybrid alarm systems.
- Integrated PIR Camera: Combines motion detection and visual alarm verification.
- 12m PIR Detection Range: Suitable for monitoring indoor rooms and protected areas.
- 85.9° PIR Detection Angle: Wide motion detection coverage.
- 52 Detection Zones: Structured passive infrared detection.
- Full HD 1080P Images: Supports image resolution up to 1920 × 1080.
- Additional Image Resolutions: 1280 × 720 and 640 × 480.
- Wide Camera Field of View: 109° horizontal and 60° vertical.
- Infrared Night Illumination: Up to 12m IR fill range.
- Colour and Black-and-White Imaging: Supports day/night operation.
- JPEG Image Format: Captures still images for supported alarm verification functions.
- Visual Alarm Verification: Helps users assess alarm events using captured images.
- Up to 30kg Pet Immunity: Helps reduce unwanted PIR alarms caused by suitable pets.
- Three PIR Sensitivity Modes: Auto, High and Pet.
- Smart Environmental Control: Advanced digital processing and 3D optics.
- Digital Temperature Compensation: Supports reliable detection across changing indoor temperatures.
- Creep Zone Protection: Provides supported detection close to the device.
- Sealed Optics: Helps protect the PIR optical components.
- 6500 Lux White Light Filtering: Helps reduce interference from strong visible light.
- Polarising IR Lens: Designed for more uniform infrared illumination.
- Integrated Image Buffer: Supports temporary image storage.
- Speed-X Wired Bus: High-speed communication with compatible AX HYBRID PRO equipment.
- AES-128 Encryption: Protects supported bus communication.
- Up to 1km Bus Transmission: Subject to manufacturer installation requirements.
- Remote Configuration: Supported through compatible Hikvision applications.
- Front and Rear Tamper Protection: Helps detect interference with the detector.
- Blue Alarm LED: Visual alarm indication.
- Orange Fault LED: Visual fault indication.
- 9–16V DC Power: Suitable for compatible low-voltage security systems.
- 100mA Maximum Current: Professional wired operation.
- No Detector Batteries: Powered through a suitable wired connection.
- Compact Indoor Design: 73 × 130.5 × 56.7mm.
- Recommended Mounting Height: 1.8–2.4m.
Technical Specifications
Detailed Features & Benefits
Integrated PIR Motion Detection and Camera
The DS-PDPC12P-EG2 combines two important security functions in one device: passive infrared intrusion detection and visual alarm verification.
When a qualifying motion event occurs, the detector can capture images associated with the alarm.
This provides additional information compared with a conventional PIR detector that only reports movement.
Full HD 1080P Image Verification
The integrated camera supports image resolution up to 1920 × 1080 pixels.
Additional supported resolutions include 1280 × 720 and 640 × 480.
The selected resolution and image delivery functions depend on the compatible alarm system configuration.
Visual Alarm Verification
Visual verification allows authorised users to review images associated with supported alarm events.
This can help determine whether an alarm requires further investigation.
Image verification does not guarantee identification of a person or confirmation of every intrusion event.
12-Metre PIR Detection Range
The detector provides PIR coverage of up to 12 metres.
Its 85.9° detection angle and 52 detection zones support monitoring of suitable indoor rooms and circulation areas.
Wide-Angle Camera Coverage
The built-in camera features a 109° horizontal and 60° vertical field of view.
This provides a wider visual perspective than the specified PIR detection angle.
The camera field of view and PIR detection coverage are separate specifications and should both be considered during installation.
Infrared Night Imaging
The DS-PDPC12P-EG2 incorporates infrared illumination with a specified range of up to 12 metres.
This supports image capture in low-light conditions.
Actual image clarity depends on the installation environment, distance and reflective surfaces.
Polarising Infrared Lens Design
Hikvision specifies a polarising infrared lens design intended to provide more uniform night illumination.
This helps improve image quality during supported low-light alarm verification events.
Colour and Black-and-White Imaging
The detector supports colour imaging under suitable lighting conditions and black-and-white imaging during infrared operation.
Up to 30kg Pet Immunity
The PIR sensor supports pet immunity up to 30kg.
This helps reduce unwanted alarms from suitable household pets when the detector is installed and configured correctly.
Pet immunity is conditional and does not guarantee that all animal movement will be ignored.
Three PIR Sensitivity Modes
The detector supports Auto, High and Pet sensitivity settings.
These options allow professional installers to configure motion detection according to the protected environment.
Smart Environmental Control
Hikvision's Smart Environmental Control technology combines advanced digital signal processing with 3D optics.
This helps improve motion detection performance under varying environmental conditions.
Digital Temperature Compensation
Digital temperature compensation supports consistent PIR detection performance as indoor temperatures change.
6500 Lux White Light Filtering
The detector incorporates white light filtering rated at 6500 lux.
This helps reduce interference caused by strong visible light.
Creep Zone Protection
Creep zone protection supports detection close to the detector when it is correctly installed.
Sealed Optical Design
The PIR optical system incorporates sealed optics to help protect the detection components.
Integrated Image Memory Buffer
The detector includes an internal image memory buffer.
This supports temporary image storage as part of its visual verification functionality.
The manufacturer does not describe this product as a standalone continuous video recorder.
Hikvision Speed-X Wired Bus
The DS-PDPC12P-EG2 uses Hikvision Speed-X wired bus communication.
This high-speed connection supports alarm signalling and image transmission through compatible AX HYBRID PRO equipment.
It does not use a conventional PIR relay connection or wireless Tri-X communication.
Up to 1km Bus Transmission
Hikvision specifies a maximum transmission distance of 1 kilometre for this detector.
Actual supported wiring distance depends on cable characteristics, system topology, power requirements and manufacturer installation instructions.
AES-128 Encrypted Communication
The detector supports AES-128 encryption for its wired communication interface.
This helps protect supported data transmission between the detector and compatible control equipment.
Configurable Bus Address
The detector supports bus addresses from 0 to 63.
Its address is configured using DIP switches.
Each detector on the relevant bus must use an appropriate unique address.
Remote Configuration
Supported detector settings can be managed through compatible Hikvision applications.
Available configuration options depend on the connected control panel and firmware.
Front and Rear Tamper Protection
The DS-PDPC12P-EG2 supports front and rear tamper detection.
These functions help identify interference with the housing or mounting arrangement.
Alarm and Fault LED Indicators
The detector includes a blue alarm LED and orange fault LED.
These indicators assist with installation, commissioning and troubleshooting.
9–16V DC Operation
The detector operates from a suitable 9–16V DC power supply.
Its nominal operating voltage is 12V DC, with maximum current consumption of 100mA.
The complete Speed-X bus power budget should be checked before installation.
No Battery Replacement Required
Unlike wireless PIR camera detectors, this model operates from wired power.
There are no detector batteries to replace during normal operation.
Compact Indoor Installation
The detector measures 73 × 130.5 × 56.7mm and weighs approximately 195g.
It is designed for indoor wall mounting at a height of 1.8–2.4 metres.
Security Grade 2
Hikvision's installation manual identifies the detector as EN 50131 Security Grade 2, Environmental Class II.
The compliance classification of the complete alarm installation must be assessed separately.
Ideal Applications
- Residential Security: Motion detection with image verification in suitable indoor areas.
- Commercial Offices: Visual assessment of supported intrusion alarm events.
- Retail Stores: PIR detection and alarm images for protected internal spaces.
- Showrooms: Motion detection with supplementary visual information.
- Warehouses: Monitoring suitable internal areas within the specified detection range.
- Business Premises: Additional alarm verification through compatible AX HYBRID PRO systems.
- Professional Alarm Installations: Wired PIR camera detection using Speed-X bus communication.
- AX HYBRID PRO Upgrades: Adding image verification to compatible alarm installations.
Compatibility & Installation
Manufacturer: Hikvision.
Model: DS-PDPC12P-EG2.
Series: AX HYBRID PRO.
Detection: PIR motion with image verification.
PIR Range: 12m / 85.9°.
Camera: Up to 1920 × 1080 JPEG images.
Night Illumination: Infrared, up to 12m.
Communication: Wired Speed-X Bus.
Power: 9–16V DC.
Mounting: Indoor wall mounting.
Mounting Height: 1.8–2.4m.
Recommended Height: 2.2m.
Professional Installation: Recommended.
Recommended Installation Procedure
- Confirm compatibility with the intended Hikvision AX HYBRID PRO control panel.
- Verify that the control panel supports the DS-PDPC12P-EG2 and Speed-X image verification.
- Review the official Hikvision datasheet and user manual.
- Plan the Speed-X bus wiring and detector power requirements.
- Confirm the supported bus topology and cable distance.
- Assess the total current requirements of all connected bus devices.
- Select a suitable indoor mounting position.
- Maintain the specified mounting height of 1.8–2.4m.
- Use approximately 2.2m where appropriate for the installation.
- Position the detector to provide the required PIR coverage.
- Consider the camera's separate 109° horizontal field of view.
- Avoid obstructions within the PIR detection area.
- Avoid unsuitable locations exposed to direct sunlight or rapid temperature changes.
- Ensure the camera has an appropriate view of the protected area.
- Consider reflective surfaces that may affect infrared night images.
- Mount the detector securely according to Hikvision's instructions.
- Configure a suitable unique Speed-X bus address using the DIP switches.
- Complete address configuration before powering on the system.
- Connect the bus communication terminals according to the manufacturer's wiring diagram.
- Connect the required DC power supply.
- Check wiring polarity and continuity.
- Power the detector and allow it to initialise.
- Confirm successful communication with the control panel.
- Complete device enrolment where required.
- Configure PIR sensitivity for the protected environment.
- Configure supported image verification settings.
- Perform the manufacturer's recommended PIR walk test.
- Confirm that qualifying alarm events are received by the control panel.
- Verify that the detector captures the expected alarm images.
- Check image quality under normal lighting conditions.
- Check infrared image quality under suitable low-light conditions.
- Confirm any configured application notifications operate correctly.
- Test front and rear tamper reporting.
- Check the alarm and fault LED indications.
- Record the final detector address and configuration.
- Complete system commissioning and provide operating instructions to the system owner.
Speed-X Compatibility Notice: This detector requires a compatible Speed-X bus interface. It must not be connected as a conventional normally closed PIR detector.
Power Notice: The DS-PDPC12P-EG2 requires 9–16V DC. Do not connect it directly to 230V AC mains power.
Image Verification Notice: The integrated camera is intended for supported alarm image verification. It is not a substitute for a dedicated CCTV camera or continuous video recording system.
Privacy Notice: Install and configure the camera in accordance with applicable privacy, workplace and surveillance requirements.
Pet Immunity Notice: The 30kg pet immunity specification depends on correct installation and configuration.
Package Contents
- 1 × Hikvision DS-PDPC12P-EG2 Wired PIR Camera Detector
Package Contents Notice: Mounting accessories and printed documentation may vary by supplied packaging. The AX HYBRID PRO control panel, power supply and installation cabling are sold separately unless otherwise specified.
Frequently Asked Questions
What is the Hikvision DS-PDPC12P-EG2?
It is a wired PIR motion detector with an integrated camera for visual alarm verification.
Is it designed for AX HYBRID PRO?
Yes. It is designed for compatible Hikvision AX HYBRID PRO alarm systems.
Does it detect motion?
Yes. It uses passive infrared technology to detect qualifying movement.
Does it include a camera?
Yes. The detector incorporates an image verification camera.
What is the maximum image resolution?
1920 × 1080 pixels.
Does it support Full HD images?
Yes. It supports 1080P image capture.
What other image resolutions are available?
1280 × 720 and 640 × 480.
What image format does it use?
JPEG.
Does it record continuous video?
Continuous CCTV recording is not specified. The camera is intended for alarm image verification.
What is visual alarm verification?
It allows authorised users to review images associated with supported intrusion alarm events.
Can it send alarm images to a smartphone?
Supported image delivery depends on the compatible alarm control panel, application and system configuration.
Does it support night images?
Yes. It includes infrared illumination.
What is the infrared range?
Up to 12 metres.
Does it capture colour images?
Yes, under suitable lighting conditions.
Does it support black-and-white night images?
Yes.
What is the camera field of view?
109° horizontally and 60° vertically.
What is the PIR detection range?
Up to 12 metres.
What is the PIR detection angle?
85.9°.
How many PIR detection zones are provided?
52.
What movement speed can it detect?
0.3–2m/s.
Does it support pet immunity?
Yes. Hikvision specifies pet immunity up to 30kg.
Will it ignore every pet under 30kg?
No. Pet immunity depends on mounting position, sensitivity settings and animal movement.
What sensitivity modes are available?
Auto, High and Pet.
What is Smart Environmental Control?
It is Hikvision's combination of advanced digital signal processing and optical technology designed to support reliable detection.
Does it support digital temperature compensation?
Yes.
Does it support creep zone protection?
Yes.
Does it include sealed optics?
Yes.
What is the white light filter rating?
6500 lux.
Is the DS-PDPC12P-EG2 wireless?
No. It is a wired detector.
What communication technology does it use?
Hikvision Speed-X wired bus.
Can it connect to a conventional NC alarm zone?
Not directly. It requires a compatible Speed-X bus connection.
Does it use RS485-style bus wiring?
It uses Hikvision's proprietary Speed-X bus interface. Wiring must follow Hikvision's official documentation.
What is the maximum specified transmission distance?
Up to 1 kilometre, subject to installation requirements.
Is the communication encrypted?
Yes. AES-128 encryption is specified.
How is the detector address configured?
Using the integrated DIP switches.
What address range is supported?
0–63.
Can two detectors use the same bus address?
Each detector must have an appropriate unique address on the relevant bus.
Does it require batteries?
No. It operates from a wired DC power supply.
What power supply does it require?
9–16V DC.
What is the nominal operating voltage?
12V DC.
How much current does it consume?
Up to 100mA.
Does it have tamper protection?
Yes. Front and rear tamper protection are supported.
What do the LED indicators mean?
Blue indicates alarm and orange indicates fault.
Does it have an image memory buffer?
Yes. Hikvision specifies an integrated image buffer.
Can it be configured remotely?
Supported settings can be configured through compatible Hikvision applications.
What is the recommended mounting height?
Hikvision specifies 1.8–2.4m, with approximately 2.2m recommended.
Can it be installed outdoors?
No. It is designed for indoor use.
What is the operating temperature range?
-10°C to +55°C.
What are the detector dimensions?
73 × 130.5 × 56.7mm.
How much does it weigh?
Approximately 195g.
Is it an EN Grade 2 detector?
Hikvision's user manual identifies EN 50131 Security Grade 2.
Can it replace a conventional CCTV camera?
No. It is intended for PIR motion detection and alarm image verification rather than continuous CCTV surveillance.
Can images be sent to an alarm receiving centre?
Supported alarm image delivery depends on the compatible system and any separately arranged monitoring service.
Does Civic Electronic provide alarm monitoring?
No. Civic Electronic supplies security equipment and professional technical support but does not provide alarm monitoring services.
Does it require professional installation?
Professional installation is recommended because correct Speed-X wiring, addressing and image verification configuration are essential.
Where can I buy the Hikvision DS-PDPC12P-EG2 in Australia?
Civic Electronic supplies genuine Australian Hikvision alarm equipment with professional installer and trade support.
Why Buy from Civic Electronic?
Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.
We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.
- Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
- Hikvision Training Centre: Professional product knowledge and installer training.
- Australian Warranty Support: Warranty assistance for eligible Hikvision products.
- Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
- Technical Support: Assistance with compatible Hikvision equipment selection.
- Professional Installer Support: Support for security technicians and system integrators.
- Australia-Wide Delivery: Shipping available throughout Australia.
- Free Standard Shipping: Available on eligible orders of $300 or more.
- 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.
For Hikvision AX HYBRID PRO PIR camera detectors, alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.
Official Hikvision Manufacturer Documentation
Review the official Hikvision DS-PDPC12P-EG2 datasheet and user manual for complete PIR detection specifications, camera resolution, Speed-X bus communication, wiring, addressing, installation and commissioning instructions.
Download Official Hikvision DS-PDPC12P-EG2 Datasheet (PDF)
Download Official Hikvision DS-PDPC12P-EG2 User Manual (PDF)
Important: The DS-PDPC12P-EG2 is a wired Speed-X bus PIR camera detector featuring 12m PIR detection, 1080P image verification, up to 30kg pet immunity, infrared illumination and AES-128 encrypted communication. It requires a compatible AX HYBRID PRO system and 9–16V DC power. It is not a wireless detector or standalone CCTV camera.
Genuine Product Assurance, We are officially an authorized reseller of Hikvision
Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.
Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.
1. Free and Express Shipping
- Free Standard Shipping applies to all orders valued at $300 or more.
- Express Shipping is available for an additional $65 per order.
Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:
2. Order Processing
- Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
- Orders are processed Monday to Friday, excluding weekends and public holidays.
- Tracking information will be provided via email after 11:00 AM on the day the order is shipped.
All orders are dispatched using the most efficient postage method available to ensure timely delivery.
3. Delivery Timeframes
- Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
- Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
- Standard Shipping: Please allow up to 10 business days from dispatch.
If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.
4. Delivery Requirements and Limitations
- All deliveries require a signature upon receipt.
- Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
- If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
- We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.
Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.
We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.
If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.
5. Tracking Your Order
Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.
To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.
6. Additional Information
We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.
Price Beat Guarantee
At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.
How It Works
If you find a cheaper price, simply:
- Provide a link to the competitor's advertised product
- Confirm the seller is an authorised Australian reseller
- Submit your request before placing your order
Our team will verify the details and respond promptly.
Eligibility Requirements
To qualify for our Price Beat Guarantee, the following conditions must be met:
- The competitor must be an authorised Australian reseller
- The seller must operate as a legitimate Australian retail business
- The item must be identical (same brand, model number and specifications)
- The product must be brand new and currently in stock
- The price must be publicly advertised (not a private quote or member-only offer)
- The advertised price must include GST
- Shipping costs must be included in the total comparison
- The competitor must supply Australian warranty support
Exclusions
Our Price Beat Guarantee does not apply to:
- Dropshippers or intermediary sellers who do not physically stock the product
- Sellers operating without a verifiable Australian retail presence
- Businesses with no registered retail location or identifiable trading address
- Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
- Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
- Refurbished, used or open-box items
- Pricing errors or misprints
- Bundle deals, bonus offers or cashback promotions
- Trade, bulk or special contract pricing
Important Conditions
- Price Beat requests must be approved prior to purchase
- Approved offers are valid for 24 hours only
- Civic Electronic reserves the right to verify reseller authorisation status
- We reserve the right to decline requests that do not meet the above criteria
- This policy may be modified or withdrawn at any time without notice
Why Buy From Civic Electronic?
- 100% Genuine Products
- Authorised Australian Reseller
- Local Australian Warranty
- Real Stock, Not Dropshipped
- Expert Technical Support
- Fast & Secure Dispatch
Our Range of Accessories
4TB Surveillance Hard Drive for CCTV DVR/NVR – WD Purple, Seagate SkyHawk or Toshiba
Western Digital4TB Surveillance Hard Drive for CCTV DVR/NVR – WD Purple, Seagate SkyHawk or Toshiba Expand your CCTV security system's recording capacity wi...
View full details2TB Surveillance Hard Drive for CCTV DVR/NVR – WD Purple, Seagate SkyHawk or Toshiba
Western Digital2TB Surveillance Hard Drive for CCTV DVR/NVR – WD Purple, Seagate SkyHawk or Toshiba Expand your CCTV system's recording storage with a 2TB S...
View full detailsCAT6 Patch Lead Network Cable 20m
Cable AUCAT6 Patch Lead Network Cable Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmissio...
View full detailsCAT6 Patch Lead Network Cable 30m
Cable AUCAT6 Patch Lead Network Cable 30m Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmi...
View full detailsCAT6 Patch Lead Network Cable 15m
Cable AUCAT6 Patch Lead Network Cable 15m Perfect in conjunction with 10 and 100 Base-T50 micron gold plated connectors to ensure a clean and clear transmi...
View full details