Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDPG12P-EG2 AX HYBRID PRO Wired PIR & Glass Break Detector – 12m Dual Detection

Original price $59.00 - Original price $59.00
Original price
$59.00
$59.00 - $59.00
Current price $59.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDPG12P-EG2 AX HYBRID PRO Wired PIR & Glass Break Detector

The Hikvision DS-PDPG12P-EG2 AX HYBRID PRO Wired PIR & Glass Break Detector is a professional dual-technology intrusion detector combining passive infrared motion detection and acoustic glass-break detection in one compact, hardwired device.

Designed for professional security installations, the DS-PDPG12P-EG2 provides two complementary detection functions to help protect rooms, offices, commercial premises and other suitable indoor environments.

The integrated passive infrared (PIR) detector provides a detection range of up to 12 metres, with an 85.9° detection angle and 52 detection zones.

The built-in acoustic glass-break detector provides detection coverage of up to 8 metres, with a specified detection angle of 120°.

By combining these technologies, the detector can monitor qualifying movement within a room and detect acoustic signatures associated with breaking supported glass.

This makes the DS-PDPG12P-EG2 particularly suitable for indoor areas containing windows, glass doors, glazed shopfronts and other vulnerable glass entry points.

Unlike a conventional PIR detector, which only monitors movement, the DS-PDPG12P-EG2 provides an additional acoustic detection function to help identify potential glass-breaking intrusion attempts.

The PIR detector supports pet immunity up to 30kg when correctly installed and configured according to Hikvision's recommendations.

Pet immunity helps reduce unwanted motion alarms caused by suitable household pets, although actual performance depends on animal movement, mounting height, furniture placement and detector configuration.

The detector incorporates digital temperature compensation, advanced digital processing, sealed optics and creep zone protection to support reliable motion detection.

Its PIR sensitivity can be configured using Auto or Pet settings, allowing professional installers to adjust the detector according to the intended environment.

The acoustic glass-break detection function supports adjustable sensitivity through an integrated potentiometer.

This enables installers to adjust the glass-break detection response according to the protected glazing, room layout and acoustic conditions.

Hikvision specifies support for selected float, plate, tempered, wired, laminated, leaded and double-glazed glass, subject to the manufacturer's specified glass dimensions and installation requirements.

The detector supports glass thicknesses from 2.4mm to 6.4mm and glass sizes from 0.3 × 0.3 metres to 3 × 3 metres.

As a wired security detector, the DS-PDPG12P-EG2 provides normally closed alarm connections and selectable end-of-line resistor options for integration with compatible wired alarm control panels.

The detector's internal configuration supports professional alarm wiring arrangements, including normally closed, single end-of-line and double end-of-line configurations.

Its design allows installers to configure PIR, glass-break and tamper signalling according to the requirements of the connected alarm system.

The detector includes front tamper protection to help identify unauthorised opening or interference with its housing.

Integrated LED indicators provide visual feedback during detection and commissioning:

  • Green: PIR detection indication.
  • Red: Glass-break detection indication.
  • Blue: Alarm indication.

The DS-PDPG12P-EG2 operates from a 9–16V DC power supply, with a nominal voltage of 12V DC and maximum power consumption of 36mA.

Its wide operating voltage range provides flexibility when integrating the detector with suitable professional alarm control panels and low-voltage security power supplies.

The detector also incorporates reverse-polarity connection protection, helping protect the device against certain wiring errors.

Designed for indoor installation, the DS-PDPG12P-EG2 supports operating temperatures from -10°C to +55°C.

The compact housing measures 65.5 × 103 × 48.5mm and weighs approximately 98.5g.

Hikvision recommends wall mounting at a height of 1.8 to 2.4 metres.

Optional Hikvision wall and ceiling mounting brackets are available separately for suitable installation requirements.

The DS-PDPG12P-EG2 is designed for integration with compatible Hikvision wired and hybrid alarm systems, including supported AX HYBRID PRO installations.

Its wired alarm interface may also support integration with other compatible alarm panels that meet the detector's power and zone input requirements.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PDPG12P-EG2 is a wired detector. It does not include wireless communication, batteries or a built-in alarm control panel. Professional installation and correct wiring are recommended.

Hikvision DS-PDPG12P-EG2 AX HYBRID PRO Wired PIR Glass Break Detector 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable warranty terms and Australian Consumer Law.

Key Features

  • Dual Detection Technology: Combines PIR motion detection and acoustic glass-break sensing in one wired detector.
  • 12m PIR Detection Range: Provides motion detection coverage for suitable indoor environments.
  • 85.9° PIR Detection Angle: Wide coverage for rooms and internal areas.
  • 52 PIR Detection Zones: Structured detection coverage across the monitored area.
  • 0.3–2m/s Detectable Speed: Designed to detect qualifying movement within the specified range.
  • 8m Glass-Break Detection Range: Acoustic detection of supported glass-breaking events.
  • 120° Glass-Break Detection Angle: Wide acoustic coverage for suitable glazing.
  • Adjustable Glass-Break Sensitivity: Potentiometer adjustment for professional configuration.
  • Up to 30kg Pet Immunity: Helps reduce unwanted PIR alarms from suitable household pets.
  • Auto & Pet PIR Sensitivity: Selectable sensitivity settings.
  • Digital Temperature Compensation: Helps maintain PIR detection performance across varying temperatures.
  • Digital Signal Processing: Supports reliable detection performance.
  • Sealed PIR Optics: Helps protect the optical detection system.
  • Creep Zone Protection: Supports detection in the near-detector area.
  • 6500 Lux White Light Filter: Helps reduce interference from strong visible light.
  • Multiple Glass Types: Supports selected float, plate, tempered, wired, laminated, leaded and double-glazed glass.
  • 2.4–6.4mm Glass Thickness: Suitable for supported glazing within the manufacturer's specifications.
  • Normally Closed Alarm Output: Designed for compatible wired alarm inputs.
  • Selectable EOL Resistors: Supports professional supervised alarm wiring.
  • NC, SEOL & DEOL Wiring: Multiple connection options for compatible alarm systems.
  • Configurable PIR & Glass-Break Signalling: Supports different wired alarm configurations.
  • Front Tamper Protection: Helps detect interference with the detector housing.
  • Three LED Indicators: Green PIR, red glass break and blue alarm indications.
  • 9–16V DC Operation: Suitable for compatible low-voltage security systems.
  • 12V DC Nominal Voltage: Standard alarm-system operating voltage.
  • 36mA Maximum Consumption: Low-voltage wired operation.
  • Reverse-Polarity Protection: Helps protect against certain incorrect power connections.
  • Indoor Wall Mounting: Recommended installation height of 1.8–2.4m.
  • Compact Housing: 65.5 × 103 × 48.5mm.
  • Professional Alarm Compatibility: Designed for suitable wired and AX HYBRID PRO installations.

Technical Specifications

Brand Hikvision
Model DS-PDPG12P-EG2
Product Series AX HYBRID PRO
Product Type Wired PIR & Glass Break Detector
Detection Technology Passive Infrared + Acoustic Sensor
PIR Detection Range 12m
PIR Detection Angle 85.9°
PIR Detection Zones 52
Detectable Speed 0.3–2m/s
Pet Immunity Up to 30kg
PIR Sensitivity Auto / Pet
Glass-Break Detection Range 8m
Glass-Break Detection Angle 120°
Glass-Break Sensitivity Potentiometer Adjustment
Supported Glass Types Float, Plate, Tempered, Wired, Laminated, Leaded & Double Glazing
Supported Glass Thickness 2.4–6.4mm
Supported Glass Size 0.3 × 0.3m to 3 × 3m
White Light Filter 6500 Lux
Digital Temperature Compensation Supported
Digital Processing Supported
Sealed Optics Supported
Creep Zone Protection Supported
Tamper Protection Front
Alarm Output Normally Closed
Wiring Options NC / SEOL / DEOL
Selectable PIR Alarm Resistors 1kΩ / 2.2kΩ / 4.7kΩ / 5.6kΩ / 6.8kΩ
Selectable Glass-Break Alarm Resistors 1kΩ / 2.2kΩ / 4.7kΩ / 5.6kΩ / 6.8kΩ
Selectable Tamper Resistors 1kΩ / 2.2kΩ / 4.7kΩ / 5.6kΩ
LED Indicators Green (PIR), Red (Glass Break), Blue (Alarm)
Transmission Method Wired
Power Supply 9–16V DC
Nominal Voltage 12V DC
Power Consumption 36mA Maximum
Operating Temperature -10°C to +55°C
Storage Temperature -20°C to +60°C
Operating Humidity 10%–90%
Dimensions (W × H × D) 65.5 × 103 × 48.5mm
Weight 98.5g
Recommended Mounting Height 1.8–2.4m
Mounting Method Wall
Installation Environment Indoor
Optional Accessories Compatible Hikvision Wall & Ceiling Brackets
Security Classification EN 50131 Security Grade 2

Detailed Features & Benefits

Dual PIR and Glass-Break Detection

The DS-PDPG12P-EG2 combines passive infrared motion detection with acoustic glass-break sensing.

These complementary technologies provide additional protection for indoor environments where both movement and vulnerable glazing need to be monitored.

Both detection functions can be integrated into a suitable wired alarm system according to the manufacturer's supported wiring configurations.

12-Metre PIR Motion Detection

The integrated PIR sensor provides a detection range of up to 12 metres.

Its 85.9° detection angle and 52 detection zones help provide comprehensive coverage of suitable indoor spaces.

8-Metre Acoustic Glass-Break Detection

The acoustic sensor provides glass-break detection up to 8 metres.

It is designed to identify supported acoustic signatures associated with breaking glass.

The glass-break function is intended to supplement other intrusion detection measures rather than replace them.

Adjustable Glass-Break Sensitivity

Glass-break sensitivity is adjusted using an integrated potentiometer.

This allows installers to optimise the detection response according to the protected glass, room layout and acoustic environment.

Support for Multiple Glass Types

Hikvision specifies compatibility with selected float, plate, tempered, wired, laminated, leaded and double-glazed glass.

Supported glazing must fall within the manufacturer's specified dimensions and installation conditions.

Up to 30kg Pet Immunity

The PIR sensor supports pet immunity up to 30kg.

This helps reduce unwanted alarms from suitable pets when the detector is installed at the correct height and configured appropriately.

Pet immunity does not guarantee that every movement by a pet will be ignored.

Auto and Pet PIR Sensitivity

The detector provides Auto and Pet sensitivity options.

These settings allow professional installers to adjust the PIR function according to the monitored environment.

Digital Temperature Compensation

Digital temperature compensation helps maintain PIR detection performance as indoor temperatures change.

Advanced Digital Processing

The DS-PDPG12P-EG2 incorporates digital processing technology to support reliable motion detection.

Sealed Optical Design

The detector features sealed optics designed to help protect its PIR sensing components.

Creep Zone Protection

Creep zone protection helps provide detection coverage close to the detector.

6500 Lux White Light Filtering

The PIR detector includes white light filtering rated at 6500 lux.

This helps reduce interference from strong visible light sources.

Professional Wired Alarm Integration

The DS-PDPG12P-EG2 uses a hardwired connection rather than wireless communication.

This makes it suitable for compatible wired and hybrid alarm installations where security cabling is available.

Normally Closed Alarm Connections

The detector provides normally closed alarm signalling for integration with compatible alarm control panels.

Correct connection and configuration must follow Hikvision's official wiring instructions.

Selectable End-of-Line Resistors

The detector includes selectable end-of-line resistor values for professional alarm wiring.

This supports supervised zone configurations where the connected control panel provides the corresponding functionality.

NC, SEOL and DEOL Wiring Options

Supported wiring configurations include normally closed, single end-of-line and double end-of-line arrangements.

The selected wiring configuration must match the alarm control panel's programmed zone settings.

Configurable PIR and Glass-Break Signalling

The detector includes internal link settings that allow supported PIR, glass-break and tamper signalling arrangements.

Professional installers should review the manufacturer's wiring diagrams before connecting the detector.

Front Tamper Protection

The detector includes front tamper protection to help identify unauthorised opening of its housing.

Dedicated LED Indicators

Green, red and blue LED indications assist installers during configuration and testing.

The LEDs provide feedback for PIR detection, glass-break detection and alarm conditions.

9–16V DC Power Supply

The DS-PDPG12P-EG2 operates from a suitable regulated 9–16V DC power supply.

Its nominal voltage is 12V DC.

Low-Voltage Operation

The detector has a manufacturer-specified maximum current consumption of 36mA.

This allows integration with suitable alarm power supplies when the complete system power budget has been assessed.

Reverse-Polarity Protection

The detector incorporates reverse-polarity connection protection.

Correct polarity should nevertheless always be observed during installation.

Compact Indoor Design

Measuring 65.5 × 103 × 48.5mm, the detector provides two detection functions within one compact housing.

Recommended Mounting Height

Hikvision specifies a mounting height of 1.8–2.4 metres.

Correct positioning is important for both PIR coverage and acoustic glass-break performance.

Compatible with AX HYBRID PRO Systems

The detector is suitable for selected Hikvision AX HYBRID PRO installations that support its power, alarm signalling and zone supervision requirements.

Compatibility with the exact alarm panel should be confirmed before installation.

Ideal Applications

  • Residential Security Systems: Combined PIR and glass-break detection for suitable indoor rooms.
  • Living Rooms: Monitoring movement and supported glazing.
  • Office Security: Protecting rooms containing windows and glass doors.
  • Retail Shops: Additional intrusion detection near suitable glazed shopfronts.
  • Commercial Premises: Combined detection for vulnerable indoor areas.
  • Showrooms: Monitoring movement and supported glass entry points.
  • Wired Alarm Upgrades: Adding dual-function detection to compatible systems.
  • AX HYBRID PRO Installations: Professional wired PIR and glass-break detection.
  • Security System Retrofits: Suitable where compatible alarm cabling and power are available.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDPG12P-EG2.

Series: AX HYBRID PRO.

Detection Technology: PIR and acoustic glass-break.

PIR Detection Range: 12m / 85.9°.

Glass-Break Detection Range: 8m / 120°.

Pet Immunity: Up to 30kg.

Power Supply: 9–16V DC.

Nominal Voltage: 12V DC.

Alarm Interface: Wired normally closed.

Wiring Options: NC, SEOL and DEOL.

Mounting: Indoor wall mounting.

Mounting Height: 1.8–2.4m.

Professional Installation: Recommended.

Recommended Installation Procedure

  • Confirm compatibility with the intended wired or hybrid alarm control panel.
  • Review the official Hikvision datasheet and installation manual.
  • Identify the area requiring PIR and glass-break protection.
  • Assess the protected glass type, thickness and dimensions.
  • Confirm the glazing is within the manufacturer's supported specifications.
  • Select a suitable indoor wall mounting position.
  • Maintain the recommended 1.8–2.4m installation height.
  • Avoid mounting the detector on the same wall as the protected glass, as instructed by Hikvision.
  • Avoid locations containing excessive background noise or vibration.
  • Avoid unsuitable humid environments.
  • Position the detector for appropriate PIR coverage.
  • Ensure the acoustic sensor has a suitable detection path to the protected glazing.
  • Plan the alarm cabling and power supply.
  • Use a suitable regulated 9–16V DC supply.
  • Confirm the alarm panel supports the intended zone wiring configuration.
  • Select the appropriate end-of-line resistor values.
  • Configure the PIR and glass-break signalling links as required.
  • Connect the detector according to Hikvision's official wiring diagrams.
  • Check power polarity and cable continuity.
  • Configure the alarm control panel's zone settings.
  • Select Auto or Pet PIR sensitivity as appropriate.
  • Adjust the glass-break sensitivity potentiometer.
  • Power the detector and allow it to initialise.
  • Perform the manufacturer's prescribed PIR walk test.
  • Test the glass-break function using a suitable approved testing method.
  • Confirm the alarm panel receives the expected events.
  • Verify the detector's tamper function.
  • Check that ordinary environmental conditions do not cause unacceptable unwanted alarms.
  • Record the final detector configuration.
  • Complete commissioning and provide operating information to the system owner.

Installation Notice: PIR and acoustic glass-break detection require different placement considerations. Both functions must be independently verified during commissioning.

Glass Detection Notice: Acoustic detection performance depends on the glass type, thickness, size, room acoustics and detector location.

Pet Immunity Notice: Pet immunity depends on correct installation and configuration. Pets climbing onto furniture or moving close to the detector may still trigger alarms.

Power Notice: This is a low-voltage wired detector. Do not connect it directly to 230V AC mains power.

Compatibility Notice: The DS-PDPG12P-EG2 is not a wireless AX PRO detector. It requires a compatible wired alarm input and suitable DC power supply.

Package Contents

  • 1 × Hikvision DS-PDPG12P-EG2 Wired PIR & Glass Break Detector

Package Contents Notice: Mounting accessories and printed documentation may vary by supplied packaging. Alarm control panel, cabling, power supply and optional mounting brackets are sold separately unless otherwise specified.

Frequently Asked Questions

What is the Hikvision DS-PDPG12P-EG2?

It is a wired detector combining passive infrared motion detection and acoustic glass-break sensing.

Is this detector part of the AX HYBRID PRO range?

Yes. It is suitable for selected Hikvision AX HYBRID PRO wired alarm installations.

Does it detect both movement and breaking glass?

Yes. It combines PIR motion detection and acoustic glass-break sensing.

What is the PIR detection range?

Up to 12 metres.

What is the PIR detection angle?

85.9°.

How many PIR detection zones are provided?

52.

What movement speed can it detect?

Hikvision specifies 0.3–2m/s.

What is the glass-break detection range?

Up to 8 metres.

What is the glass-break detection angle?

120°.

How is glass-break sensitivity adjusted?

Using the detector's integrated potentiometer.

Does it support pet immunity?

Yes. Hikvision specifies pet immunity up to 30kg.

Will it ignore every pet weighing less than 30kg?

No. Pet immunity depends on installation height, sensitivity, animal movement and environmental conditions.

What PIR sensitivity settings are available?

Auto and Pet.

What types of glass can it detect?

Hikvision lists selected float, plate, tempered, wired, laminated, leaded and double-glazed glass.

What glass thickness is supported?

2.4–6.4mm.

What glass sizes are supported?

From 0.3 × 0.3m to 3 × 3m.

Does it detect every type of glass break?

No. Detection depends on glass characteristics, room acoustics and installation conditions.

Does the detector contain a microphone?

It includes an acoustic sensor for glass-break detection.

Does it record conversations?

No audio recording function is specified.

Does it have a built-in camera?

No.

Is the DS-PDPG12P-EG2 wireless?

No. It is a wired detector.

What is the difference between DS-PDPG12P-EG2 and DS-PDPG12P-EG2-WB?

The DS-PDPG12P-EG2 is wired and requires external DC power. The DS-PDPG12P-EG2-WB is a battery-powered 433MHz wireless detector designed for compatible AX PRO systems.

Can it connect to Hikvision AX HYBRID PRO?

Yes, provided the control panel supports the detector's wiring and power requirements.

Can it connect to a third-party wired alarm panel?

It may be compatible with suitable third-party alarm panels supporting its normally closed alarm interface and power requirements.

What type of alarm output does it use?

Normally closed.

Does it support end-of-line resistors?

Yes. Selectable EOL resistor options are provided.

Can it support double end-of-line wiring?

Yes. Hikvision documents DEOL wiring configurations.

Does it have tamper protection?

Yes. Front tamper protection is supported.

Does it have rear tamper protection?

Rear tamper protection is not specified for this wired model.

What power supply does it require?

9–16V DC.

What is the nominal voltage?

12V DC.

How much current does it consume?

Hikvision specifies a maximum consumption of 36mA.

Does it require batteries?

No. It operates from an external DC power supply.

Does it have reverse-polarity protection?

Yes. Hikvision specifies reverse-polarity connection protection.

What do the LED colours indicate?

Green indicates PIR detection, red indicates glass-break detection and blue indicates alarm.

Does it support digital temperature compensation?

Yes.

Does it support creep zone protection?

Yes.

Does it include sealed optics?

Yes.

What is the white light filter rating?

6500 lux.

Where should the detector be mounted?

On a suitable indoor wall with appropriate coverage of the monitored area and protected glazing.

What is the recommended mounting height?

1.8–2.4 metres.

Should the detector be mounted on the same wall as the protected glass?

No. Hikvision's installation instructions advise against mounting it on the same wall as the protected glass.

Can it be installed outdoors?

No. Hikvision specifies indoor installation.

Can I use an optional mounting bracket?

Yes. Compatible wall and ceiling bracket accessories are available separately.

What are the detector dimensions?

65.5 × 103 × 48.5mm.

How much does the detector weigh?

Approximately 98.5g.

What is the operating temperature range?

-10°C to +55°C.

Is this a Grade 2 security detector?

Hikvision's installation documentation identifies Security Grade 2 under the relevant EN 50131 standards.

Can it trigger smartphone notifications?

Notifications depend on the connected alarm control panel and its configuration.

Can the PIR and glass-break functions be tested separately?

Both functions should be verified during commissioning using the manufacturer's recommended test procedures.

Does it require professional installation?

Professional installation is recommended to ensure correct wiring, detector placement and sensitivity adjustment.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and professional technical support but does not provide alarm monitoring services.

Where can I buy the Hikvision DS-PDPG12P-EG2 in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX HYBRID PRO wired detectors, glass-break detectors and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDPG12P-EG2 datasheet and user manual for complete PIR and glass-break detection specifications, supported glazing, wiring configurations, EOL resistor values, installation requirements and testing procedures.

Download Official Hikvision DS-PDPG12P-EG2 Datasheet (PDF)

Download Official Hikvision DS-PDPG12P-EG2 User Manual (PDF)

Important: The DS-PDPG12P-EG2 is a wired PIR and acoustic glass-break detector featuring 12m PIR detection, 8m glass-break detection, up to 30kg pet immunity, selectable EOL resistors and front tamper protection. It requires a suitable 9–16V DC power supply and compatible wired alarm inputs. Correct installation, glass-break sensitivity adjustment and independent testing of both detection functions are essential.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch