Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PDTT15AM-LM-WB AX PRO Wireless Outdoor Triple Signal PIR Detector – 15m, 433MHz, IP65

Save 29% Save 29%
Original price $305.00
Original price $305.00 - Original price $305.00
Original price $305.00
Current price $218.00
$218.00 - $218.00
Current price $218.00
Availability:
in stock, ready to be shipped

Hikvision DS-PDTT15AM-LM-WB AX PRO Wireless Outdoor Triple Signal Detector – 15m, 433MHz, IP65

The Hikvision DS-PDTT15AM-LM-WB AX PRO Wireless Triple Signal Detector is a professional outdoor intrusion detector designed to provide reliable perimeter protection for compatible Hikvision AX PRO wireless alarm systems.

Combining two passive infrared (PIR) sensors and 24GHz microwave detection, the DS-PDTT15AM-LM-WB uses advanced triple-signal detection logic to identify potential intrusions while helping reduce unwanted alarms caused by environmental movement.

With a maximum detection distance of 15 metres and a 90° detection angle adjustable through 180°, this outdoor detector provides flexible coverage for residential and commercial security applications.

The detector features 92 detection zones and supports motion detection speeds between 0.3 and 2 metres per second.

Its advanced detection technology combines information from two PIR sensors and a microwave sensor to improve detection reliability in challenging outdoor environments.

Hikvision's Tri-Signal Logic processes the detection signals to help distinguish genuine intrusion events from environmental disturbances.

This makes the DS-PDTT15AM-LM-WB suitable for protecting outdoor areas such as building perimeters, entrances, driveways, courtyards, commercial premises and other exposed locations.

The detector incorporates pet immunity up to 40kg when installed and configured according to the manufacturer's requirements.

This feature helps reduce unwanted alarms caused by suitable animals moving within the protected area. Actual performance depends on the animal, installation conditions and detection-zone configuration.

For additional protection against interference, the DS-PDTT15AM-LM-WB includes active anti-masking detection.

This feature is designed to identify attempts to obstruct the detector's sensing area, helping improve the integrity of the security installation.

The detector also includes front and rear tamper protection, allowing compatible alarm systems to identify interference with the detector housing or mounting arrangement.

Its anti-sway analytics help reduce unwanted alarms associated with moving vegetation and other environmental disturbances.

Digital temperature compensation assists detection performance across changing outdoor temperatures.

The DS-PDTT15AM-LM-WB uses Hikvision's 433MHz Tri-X two-way wireless communication technology, providing secure communication with compatible AX PRO control panels.

The manufacturer specifies a maximum wireless transmission distance of 1 kilometre in open areas.

Actual wireless range depends on building construction, installation position, interference and environmental conditions.

Wireless communication is protected using AES-128 encryption and supports frequency hopping to improve communication reliability.

The detector can be enrolled through supported methods including power-up registration, remote device ID and QR code registration.

Powered by five CR123A batteries, the DS-PDTT15AM-LM-WB eliminates the need for a dedicated power cable at the detector location.

Hikvision specifies a battery life of up to five years under standby conditions. Actual battery life depends on activity, temperature, wireless communication conditions and other operating factors.

The detector features an IP65-rated weather-resistant housing, making it suitable for outdoor installation in accordance with the manufacturer's instructions.

Its operating temperature range of -25°C to +60°C supports use across a wide range of environmental conditions.

Designed for wall mounting at a height of 0.8 to 1.2 metres, the DS-PDTT15AM-LM-WB allows professional installers to position and adjust the detector for the required coverage area.

Its dimensions are 75 × 202 × 73mm, with an approximate weight of 600g.

The Hikvision DS-PDTT15AM-LM-WB is an excellent solution for professional installers requiring outdoor intrusion detection with advanced PIR and microwave technology, wireless communication and flexible coverage adjustment.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Product Notice: This listing is for the DS-PDTT15AM-LM-WB detector only. A compatible AX PRO control panel and any additional security equipment are sold separately unless otherwise specified. Confirm battery and mounting accessory inclusion against the supplied product packaging.

Hikvision DS-PDTT15AM-LM-WB Wireless Outdoor Triple Signal Detector 2-Year Australian Warranty

2-Year Australian Warranty on eligible Hikvision alarm equipment supplied by Civic Electronic, subject to applicable warranty terms.

Key Features

  • Genuine Hikvision AX PRO Detector: Designed for compatible Hikvision wireless intrusion alarm systems.
  • Outdoor Triple Signal Detection: Combines two PIR sensors and one microwave sensor.
  • 15m Detection Range: Provides outdoor intrusion detection up to 15 metres.
  • 90° Detection Coverage: Detection angle adjustable through 180°.
  • 92 Detection Zones: Multiple zones for comprehensive motion detection.
  • 24GHz Microwave Detection: Uses microwave frequencies between 24.15 and 24.25GHz.
  • Tri-Signal Logic: Advanced signal processing to help reduce unwanted alarms.
  • Pet Immunity Up to 40kg: Supports suitable pet-friendly installations.
  • Active Anti-Masking: Detects supported attempts to obstruct the detector.
  • Anti-Sway Analytics: Helps reduce alarms caused by environmental movement.
  • Digital Temperature Compensation: Supports detection performance across changing temperatures.
  • Adjustable Detection Coverage: Includes adaptable coverage and a pattern mask.
  • Sealed Optical Design: Helps protect the internal detection components.
  • Front Tamper Protection: Detects interference with the detector housing.
  • Rear Tamper Protection: Detects interference with the mounting arrangement.
  • 433MHz Tri-X Wireless: Compatible with supported AX PRO WB-series equipment.
  • Two-Way RF Communication: Supports communication with a compatible alarm panel.
  • AES-128 Encryption: Protects supported wireless communication.
  • Up to 1km Wireless Range: Manufacturer-specified open-area transmission distance.
  • Frequency Hopping: Helps improve wireless communication reliability.
  • Multiple Enrolment Methods: Power-up, remote ID and QR code registration.
  • Five CR123A Batteries: Battery-powered outdoor operation.
  • Up to 5-Year Battery Life: Manufacturer-specified standby endurance.
  • IP65 Weather Resistance: Suitable for outdoor applications.
  • Wide Operating Temperature: -25°C to +60°C.
  • Signal Strength Indication: Supports wireless signal checking.
  • Environment Temperature Indication: Provides supported temperature information.
  • Multi-Colour LED Indicators: Visual indication of PIR, microwave, masking and alarm events.
  • Professional Wall Mounting: Recommended mounting height of 0.8–1.2m.
  • 2-Year Australian Warranty: Subject to applicable warranty terms.

Technical Specifications

Brand Hikvision
Model DS-PDTT15AM-LM-WB
Product Series AX PRO
Product Type Wireless Outdoor Triple Signal Detector
Compatible Platform Selected Hikvision AX PRO Alarm Control Panels
Detection Technology Dual PIR + Microwave
Detection Processing Tri-Signal Logic
PIR Sensors 2
Microwave Sensor 1
PIR Sensor Model SFG323-711
Detection Range 15m
Detection Angle 90° Coverage, Adjustable Through 180°
Detection Zones 92
Detectable Motion Speed 0.3–2m/s
Detection Sensitivity Auto / Low
Pet Immunity Up to 40kg
Microwave Frequency 24GHz (24.15–24.25GHz)
White Light Filter 10,000 Lux
Digital Temperature Compensation Supported
Anti-Masking Supported
Adaptable Coverage Supported; Pattern Mask Included
Anti-Sway Analytics Supported
Sealed Optics Supported
Front Tamper Protection Supported
Rear Tamper Protection Supported
Environment Temperature Indicator Supported
Signal Strength Indicator Supported
Wireless Technology Tri-X
Wireless Communication Two-Way RF
Wireless Frequency 433MHz
Wireless Encryption AES-128
Wireless Range Up to 1km in Open Area
Frequency Hopping Supported
Enrolment Methods Power-Up / Remote ID / QR Code
LED – Upper PIR Green
LED – Microwave Red
LED – Lower PIR Orange
LED – Masking Green + Orange
LED – Alarm Blue
Power Supply Battery Powered
Battery Type 5 × CR123A
Typical Operating Voltage 3V DC
Standard Battery Life Up to 5 Years (Standby Conditions)
Operating Temperature -25°C to +60°C
Storage Temperature -25°C to +60°C
Operating Humidity 10%–90%
Ingress Protection IP65
Dimensions (W × H × D) 75 × 202 × 73mm
Weight Approximately 600g
Mounting Height 0.8–1.2m
Mounting Method Wall Mounting
Application Environment Outdoor
Australian Warranty 2 Years, Subject to Applicable Terms

Detailed Features & Benefits

Advanced Triple Signal Detection

The Hikvision DS-PDTT15AM-LM-WB combines two passive infrared sensors with one microwave sensor.

These three detection signals are processed using Hikvision's Tri-Signal Logic to help identify genuine movement events while reducing unwanted alarms.

This advanced detection approach is particularly useful in outdoor environments where moving vegetation, temperature changes and other environmental factors can affect conventional motion detectors.

Dual PIR Detection Technology

The detector incorporates two independent PIR detection elements.

These sensors identify changes in infrared energy associated with movement through the protected area.

The dual PIR design contributes to the detector's triple-signal processing system.

24GHz Microwave Detection

In addition to its PIR sensors, the detector uses 24GHz microwave detection technology.

The manufacturer specifies a microwave frequency range of 24.15–24.25GHz.

Microwave detection provides an additional source of movement information for the detector's signal processing system.

15-Metre Outdoor Detection Range

The DS-PDTT15AM-LM-WB provides a maximum detection range of 15 metres.

This makes it suitable for protecting selected outdoor areas around residential and commercial properties.

Actual detection performance depends on mounting position, target movement and environmental conditions.

Adjustable 90° Detection Coverage

The detector provides a nominal 90° detection angle that can be adjusted through 180°.

This allows professional installers to direct the protected area towards the required approach path or perimeter.

Correct adjustment is important to avoid unwanted coverage of public pathways, neighbouring properties or areas containing excessive environmental movement.

92 Detection Zones

The DS-PDTT15AM-LM-WB features 92 detection zones.

These zones support the detector's coverage pattern and movement detection performance.

Pet Immunity Up to 40kg

Hikvision specifies pet immunity for suitable animals weighing up to 40kg.

This feature helps reduce unwanted alarms associated with compatible pet movement.

Pet immunity is dependent on correct installation, coverage adjustment and environmental conditions. It does not guarantee that all animals below the specified weight will be ignored.

Active Anti-Masking Protection

The detector supports anti-masking detection.

This helps identify supported attempts to cover or obstruct the detector's sensing area.

Anti-masking protection provides an additional security feature for outdoor installations where the detector may be accessible.

Anti-Sway Analytics

Outdoor environments often contain trees, shrubs and other objects that move in the wind.

The DS-PDTT15AM-LM-WB includes anti-sway analytics designed to help reduce unwanted alarms associated with environmental movement.

Professional positioning remains essential to reliable detection performance.

Digital Temperature Compensation

The detector supports digital temperature compensation.

This helps maintain appropriate detection performance as ambient temperatures change.

The feature is particularly relevant for outdoor security applications exposed to seasonal temperature variations.

Adjustable Detection Pattern

The DS-PDTT15AM-LM-WB supports adaptable coverage and includes a pattern mask.

This allows professional installers to adjust the detection area for the installation.

Correct coverage adjustment can help reduce unwanted alarms and improve protection of the intended area.

Sealed Optical Construction

The detector incorporates sealed optics.

This helps protect the internal sensing components from environmental contamination.

Front and Rear Tamper Protection

The DS-PDTT15AM-LM-WB includes front and rear tamper protection.

These functions help identify interference with the detector enclosure or mounting arrangement.

Supported tamper events can be communicated to the compatible alarm control panel.

433MHz Tri-X Wireless Communication

The detector uses Hikvision Tri-X wireless technology operating at 433MHz.

This allows it to communicate with compatible AX PRO alarm control panels without requiring a dedicated communication cable.

The exact control panel must support the WB wireless frequency and this detector model.

Two-Way RF Communication

The DS-PDTT15AM-LM-WB supports two-way wireless communication.

This allows supported device information and alarm events to be exchanged with the compatible control panel.

AES-128 Wireless Encryption

Wireless communication is protected using AES-128 encryption.

This helps protect supported communication between the detector and compatible alarm system.

Up to 1km Wireless Transmission Range

Hikvision specifies a maximum wireless communication distance of 1 kilometre in open areas.

Actual range can be reduced by walls, buildings, metal structures, interference and other installation conditions.

Wireless signal strength should always be tested at the intended installation location.

Frequency Hopping Technology

The detector supports frequency hopping.

This helps improve communication reliability in suitable wireless environments.

Multiple Wireless Enrolment Methods

The DS-PDTT15AM-LM-WB supports registration through power-up enrolment, remote device ID and QR code methods.

Available registration procedures depend on the compatible AX PRO control panel and configuration interface.

Battery-Powered Outdoor Installation

The detector operates using five CR123A batteries.

Its battery-powered design reduces the need for additional power cabling at the installation location.

Battery installation and replacement must follow the manufacturer's instructions.

Up to Five Years of Battery Life

Hikvision specifies battery endurance of up to five years under standby conditions.

Actual battery life depends on the number of detection events, ambient temperature, wireless communication quality and other operating conditions.

Battery performance may be significantly reduced at low temperatures.

IP65 Outdoor Weather Resistance

The detector features an IP65-rated enclosure.

This provides protection against dust and water jets when correctly installed.

IP65 does not mean the device is designed for immersion in water.

Wide Operating Temperature Range

The DS-PDTT15AM-LM-WB supports operation between -25°C and +60°C.

This makes it suitable for a wide range of outdoor environmental conditions.

Multi-Colour Detection Indicators

The detector includes dedicated LED indications for its sensing elements and alarm conditions.

The upper PIR uses a green indicator, the microwave sensor uses red, and the lower PIR uses orange.

Masking is indicated using green and orange, while alarm detection uses blue.

These indicators assist professional installers during configuration and testing.

Professional Wall-Mounted Installation

Hikvision specifies wall mounting at a height of 0.8–1.2 metres.

Correct mounting height is important for the intended detection pattern and pet immunity performance.

Professional installation is recommended to ensure the detector is correctly aligned and configured.

Residential Perimeter Protection

The DS-PDTT15AM-LM-WB is suitable for compatible residential AX PRO installations requiring outdoor intrusion detection.

Potential applications include selected entrances, driveways, side access paths and building perimeters.

Commercial Outdoor Security

The detector can also be used in compatible commercial alarm installations.

Typical applications include building approaches, commercial courtyards, access routes and selected outdoor perimeter areas.

2-Year Australian Warranty

The Hikvision DS-PDTT15AM-LM-WB supplied by Civic Electronic includes a 2-year Australian warranty, subject to applicable warranty terms.

Ideal Applications

  • Residential Perimeter Security: Outdoor intrusion detection around compatible residential alarm installations.
  • Driveway Protection: Detecting suitable movement within the configured coverage area.
  • Side Access Paths: Protecting selected approaches to residential or commercial buildings.
  • Outdoor Entrances: Monitoring movement near designated access points.
  • Commercial Building Perimeters: Additional intrusion detection around compatible security installations.
  • Courtyards: Protecting selected enclosed outdoor areas.
  • Warehouse Approaches: Outdoor movement detection near suitable access routes.
  • Retail Premises: Perimeter detection around selected outdoor approaches.
  • AX PRO Alarm Upgrades: Adding compatible wireless outdoor detection to an existing system.
  • Professional Security Installations: Advanced outdoor PIR and microwave detection.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PDTT15AM-LM-WB.

Product Type: Wireless Outdoor Triple Signal Detector.

Compatible Platform: Selected Hikvision AX PRO alarm control panels.

Wireless Frequency: 433MHz.

Wireless Technology: Tri-X.

Wireless Range: Up to 1km in open areas.

Detection Technology: Dual PIR and 24GHz microwave.

Detection Range: 15m.

Detection Angle: 90°, adjustable through 180°.

Pet Immunity: Up to 40kg under suitable conditions.

Anti-Masking: Supported.

Tamper Protection: Front and rear.

Battery Requirement: Five CR123A batteries.

Ingress Protection: IP65.

Mounting Height: 0.8–1.2m.

Mounting Method: Wall mounting.

Installation Environment: Outdoor.

Professional Installation: Recommended.

Recommended Installation Procedure

  • Confirm compatibility with the exact Hikvision AX PRO alarm control panel.
  • Verify support for 433MHz WB-series wireless equipment.
  • Check the control panel firmware and available wireless detector capacity.
  • Review the official Hikvision installation instructions.
  • Identify the outdoor area requiring intrusion detection.
  • Assess the expected direction of intruder movement.
  • Select a suitable wall-mounting location.
  • Confirm that the mounting height is between 0.8 and 1.2 metres.
  • Consider nearby vegetation, moving objects and other possible sources of unwanted alarms.
  • Avoid unnecessary coverage of public paths or neighbouring properties.
  • Confirm that the intended mounting surface is stable.
  • Assess the wireless communication path to the alarm control panel.
  • Check the detector's IP65 installation requirements.
  • Mount the detector according to the manufacturer's instructions.
  • Install the five CR123A batteries using the correct polarity.
  • Close the detector housing according to the manufacturer's procedure.
  • Register the detector with the compatible AX PRO control panel.
  • Use the supported power-up, remote ID or QR code enrolment method.
  • Confirm successful wireless registration.
  • Check wireless signal strength.
  • Configure the appropriate alarm zone type.
  • Adjust the PIR coverage direction.
  • Configure the required detection sensitivity.
  • Adjust the detection pattern where necessary.
  • Apply the supplied pattern mask where appropriate.
  • Configure supported anti-masking functions.
  • Confirm pet immunity requirements where applicable.
  • Perform a walk test across the intended detection area.
  • Check upper PIR detection indication.
  • Check microwave detection indication.
  • Check lower PIR detection indication.
  • Verify alarm reporting to the control panel.
  • Test front and rear tamper protection.
  • Confirm the detector does not respond unnecessarily to expected environmental movement.
  • Complete final system commissioning.

Compatibility Notice: The DS-PDTT15AM-LM-WB operates at 433MHz. Compatibility with 868MHz AX PRO equipment must not be assumed.

Detection Notice: The specified 15m range and 40kg pet immunity depend on correct installation, environmental conditions and detector configuration.

Outdoor Installation Notice: Install the detector according to Hikvision's instructions. Avoid locations where moving vegetation, unstable mounting surfaces or environmental obstructions could compromise performance.

Battery Notice: Battery life is an estimate based on manufacturer operating conditions and may be significantly reduced at low temperatures.

Security Notice: This detector provides intrusion detection as part of a compatible alarm system. It does not independently provide CCTV recording, video verification or professional alarm monitoring.

Package Contents

  • 1 × Hikvision DS-PDTT15AM-LM-WB AX PRO Wireless Outdoor Triple Signal Detector

Package Contents Notice: This listing is for the wireless outdoor detector only. The AX PRO alarm control panel and additional security equipment are sold separately. Confirm battery inclusion, mounting hardware and any accessories against the supplied product packaging.

Frequently Asked Questions

What is the Hikvision DS-PDTT15AM-LM-WB?

It is a wireless outdoor triple-signal intrusion detector designed for compatible Hikvision AX PRO alarm systems.

What does triple-signal detection mean?

The detector combines two PIR sensors and one microwave sensor, using Tri-Signal Logic to process movement information.

Is the DS-PDTT15AM-LM-WB suitable for outdoor use?

Yes. It is designed for outdoor applications and features an IP65-rated enclosure.

What is the maximum detection range?

15 metres.

What is the detection angle?

The detector provides 90° coverage that can be adjusted through 180°.

How many detection zones does it have?

92 detection zones.

What detection technologies are used?

Two passive infrared sensors and one 24GHz microwave sensor.

What is the microwave frequency?

24.15–24.25GHz.

Does the detector support pet immunity?

Yes. Hikvision specifies pet immunity up to 40kg under suitable installation conditions.

Will the detector ignore every animal under 40kg?

No. Pet immunity depends on the animal, movement pattern, mounting height and environmental conditions.

Does the detector support anti-masking?

Yes. It supports anti-masking detection.

What is anti-masking?

Anti-masking helps identify supported attempts to obstruct the detector's sensing area.

Does it include anti-sway analytics?

Yes. Anti-sway analytics help reduce unwanted alarms associated with environmental movement.

Does it support temperature compensation?

Yes. Digital temperature compensation is supported.

Can the detection pattern be adjusted?

Yes. The detector supports adaptable coverage and includes a pattern mask.

Does it have front and rear tamper protection?

Yes. Both front and rear tamper protection are supported.

Is the detector compatible with Hikvision AX PRO?

Yes. It is designed for compatible Hikvision AX PRO alarm control panels.

Does it work with every AX PRO control panel?

Compatibility depends on the exact panel model, wireless frequency and firmware.

What wireless frequency does the WB model use?

433MHz.

Is it compatible with 868MHz AX PRO systems?

Compatibility must not be assumed. The DS-PDTT15AM-LM-WB is the 433MHz version.

What wireless technology does it use?

Hikvision Tri-X wireless technology.

Does it support two-way wireless communication?

Yes. It supports two-way RF communication.

What is the maximum wireless range?

Up to 1 kilometre in open areas.

Will it communicate over 1km through buildings?

Not necessarily. Buildings, walls and other obstructions can reduce the actual wireless range.

Is the wireless communication encrypted?

Yes. The detector supports AES-128 encryption.

Does it support frequency hopping?

Yes. Frequency hopping is supported.

How is the detector registered with the alarm panel?

Supported methods include power-up enrolment, remote device ID and QR code registration.

Does the detector require a power cable?

No. It operates using CR123A batteries.

How many batteries does it require?

Five CR123A batteries.

What is the expected battery life?

Up to five years under the manufacturer's specified standby conditions.

Can cold weather reduce battery life?

Yes. Hikvision advises that battery life may be significantly reduced at low temperatures.

Are batteries included?

Battery inclusion should be confirmed against the supplied product packaging.

What does IP65 mean?

IP65 indicates protection against dust ingress and water jets when the enclosure is correctly installed.

Can the detector be submerged in water?

No. IP65 does not indicate suitability for immersion.

What is the operating temperature range?

-25°C to +60°C.

What is the operating humidity range?

10%–90% relative humidity.

What mounting height is recommended?

Hikvision specifies a mounting height of 0.8–1.2 metres.

Can the detector be mounted higher than 1.2 metres?

Installation outside the manufacturer's specified mounting range may affect detection performance and pet immunity.

Can the detector be wall-mounted?

Yes. It is designed for wall mounting.

What are the detector dimensions?

75 × 202 × 73mm.

How much does the detector weigh?

Approximately 600g.

Does the detector include LED indicators?

Yes. It includes indicators for the upper PIR, microwave sensor, lower PIR, masking and alarm conditions.

What colour indicates the upper PIR?

Green.

What colour indicates microwave detection?

Red.

What colour indicates the lower PIR?

Orange.

What colour indicates an alarm?

Blue.

Can it be used to protect a driveway?

Yes. It can be suitable for driveway protection where the coverage area and environmental conditions meet the manufacturer's installation requirements.

Can it be used near trees or shrubs?

Careful positioning is required. Moving vegetation can affect outdoor detection, even with anti-sway analytics.

Can I install more than one detector?

Yes. Multiple compatible detectors may be supported depending on the AX PRO control panel's device capacity.

Does the detector include an AX PRO alarm hub?

No. The alarm control panel is sold separately.

Does it have a built-in camera?

No. This model is an intrusion detector and does not include a built-in camera.

Does it record video?

No. It does not independently record video.

Does it provide professional alarm monitoring?

No. Professional alarm monitoring is a separate service.

Is professional installation recommended?

Yes. Professional installation is recommended to ensure correct mounting, detection coverage, wireless registration and alarm performance.

What warranty applies to the DS-PDTT15AM-LM-WB?

The product includes a 2-year Australian warranty through Civic Electronic, subject to applicable terms.

Where can I buy the Hikvision DS-PDTT15AM-LM-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision AX PRO alarm equipment and accessories with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • 2-Year Australian Warranty: Warranty support for eligible Hikvision alarm equipment.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO outdoor motion detectors, wireless alarm systems and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PDTT15AM-LM-WB documentation for complete triple-signal detection specifications, coverage adjustments, wireless communication, pet immunity, anti-masking, battery requirements and installation instructions.

Download Official Hikvision DS-PDTT15AM-LM-WB Datasheet (PDF)

Download Official Hikvision Wireless Triple Signal Detector User Manual (PDF)

Important: The DS-PDTT15AM-LM-WB is a 433MHz AX PRO wireless outdoor triple-signal detector combining two PIR sensors and one 24GHz microwave sensor. It provides up to 15m detection coverage, IP65 weather resistance, anti-masking, front/rear tamper protection and pet immunity up to 40kg under suitable conditions. The detector requires five CR123A batteries and must be installed at the manufacturer's specified mounting height of 0.8–1.2m. Confirm compatibility with the exact alarm control panel and firmware before purchasing.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch