Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PM1-I8O2-H AX HYBRID PRO Wired 8-Zone Input & 2-Output Expander

Original price $55.00 - Original price $55.00
Original price
$55.00
$55.00 - $55.00
Current price $55.00
Availability:
in stock, ready to be shipped

Hikvision DS-PM1-I8O2-H AX HYBRID PRO Wired 8-Zone Input & 2-Output Expander

The Hikvision DS-PM1-I8O2-H AX HYBRID PRO Wired Input Expander is a professional security system expansion module designed to add additional wired detection zones to compatible Hikvision AX HYBRID PRO intrusion alarm control panels.

Featuring 8 onboard wired alarm inputs and 2 collector outputs, the DS-PM1-I8O2-H allows professional security installers to expand the capabilities of compatible Hikvision wired and hybrid alarm systems.

The module communicates with the alarm control panel through Hikvision's Speed-X high-speed communication bus, providing a dedicated connection for supported alarm detection and expansion functions.

With eight additional wired zones, installers can connect compatible intrusion detectors, magnetic contacts and other suitable wired alarm devices to extend security coverage throughout a property.

The DS-PM1-I8O2-H supports 3EOL (Triple End-of-Line) wiring, allowing compatible alarm systems to distinguish between supported alarm, tamper and fault conditions.

The manufacturer's specified 3EOL resistor values are 1kΩ for alarm, 1kΩ for tamper and 2.2kΩ for fault.

When correctly configured with suitable detectors, the module supports detection of alarm, tamper, masking, fault and short-circuit conditions.

Its two onboard collector outputs provide additional control signalling capabilities for compatible external relay modules.

Important: These are collector outputs intended for suitable relay interfaces. They are not equivalent to two integrated high-current relay contacts.

The DS-PM1-I8O2-H includes two Speed-X bus connections: one for connection to the compatible alarm control panel or upstream device and another for cascading an additional compatible expander.

Hikvision specifies a maximum communication distance of up to 900 metres between the control panel and expander under supported installation conditions.

A further compatible cascading connection can support an additional cable segment of up to 900 metres, subject to the manufacturer's installation requirements and system limitations.

This makes the DS-PM1-I8O2-H suitable for larger installations where wired alarm detectors are distributed across different sections of a building.

The module also incorporates a dedicated auxiliary power output rated at up to 500mA for compatible wired alarm detectors.

This provides a convenient power connection for suitable detectors installed near the expander.

Professional installers must calculate the total power consumption of connected detectors and ensure that the auxiliary output is not overloaded.

For additional protection, the DS-PM1-I8O2-H supports front and rear tamper detection, helping identify interference with the expander enclosure.

Dedicated power and fault LED indicators assist with installation, commissioning and troubleshooting.

The module has a compact plastic enclosure measuring approximately 110 × 155 × 32mm and weighs approximately 252.5g.

It is designed for protected indoor installations and operates within a temperature range of -10°C to +40°C.

The Hikvision DS-PM1-I8O2-H is suitable for professional residential and commercial security installations requiring additional wired detection zones and supported output control functions.

Typical applications include houses, offices, retail stores, warehouses, hotels and other properties using compatible Hikvision AX HYBRID PRO alarm systems.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Product Notice: This listing is for the DS-PM1-I8O2-H wired input expander only. The alarm control panel, detectors, external relay modules, power supply and cabling are not included unless separately specified.

Hikvision DS-PM1-I8O2-H AX HYBRID PRO Wired Input Expander 2-Year Australian Warranty

2-Year Australian Warranty on eligible Hikvision alarm equipment supplied by Civic Electronic, subject to applicable warranty terms.

Key Features

  • Genuine Hikvision Wired Input Expander: Designed for compatible AX HYBRID PRO alarm control panels.
  • 8 Onboard Wired Zones: Adds eight additional wired alarm detection inputs.
  • 2 Collector Outputs: Provides two control outputs for compatible external relay modules.
  • Speed-X Communication: High-speed communication with compatible Hikvision alarm control panels.
  • 2 Speed-X Bus Connections: One uplink and one downlink for supported cascading arrangements.
  • Expander Cascading: Supports connection of additional compatible wired input expanders.
  • Up to 900m Bus Distance: Manufacturer-specified maximum communication distance per supported segment.
  • 3EOL Wiring Support: Triple End-of-Line resistor configuration.
  • Alarm Detection: Supports compatible wired alarm zone signalling.
  • Tamper Detection: Supports detection of tamper conditions.
  • Masking Detection: Supports compatible detector masking status.
  • Fault Detection: Supports detection of configured fault conditions.
  • Short-Circuit Detection: Supports identification of wiring short conditions.
  • 500mA Auxiliary Power Output: Provides power for suitable wired detectors.
  • Front Tamper Protection: Supports detection of interference with the enclosure.
  • Rear Tamper Protection: Supports detection of removal from the mounting surface.
  • Power LED Indicator: Provides visual power status information.
  • Fault LED Indicator: Assists with troubleshooting and maintenance.
  • Low Quiescent Current: Approximately 45mA at 12V DC.
  • Compact Plastic Housing: Approximately 110 × 155 × 32mm.
  • Indoor Installation: Designed for protected indoor environments.
  • Professional Security Integration: Suitable for residential and commercial wired alarm expansion.
  • 2-Year Australian Warranty: Subject to applicable warranty terms.

Technical Specifications

Brand Hikvision
Model DS-PM1-I8O2-H
Product Series AX HYBRID PRO
Product Type Speed-X Wired Input Expander
Product Category Intrusion Alarm Input/Output Expansion Module
Compatible Platform Selected Hikvision AX HYBRID PRO Control Panels
Wired Alarm Inputs 8
Collector Outputs 2
Collector Output Application Control Signals for Compatible Relay Modules
Communication Bus Speed-X / High-Speed RS-485
Speed-X Bus Connections 2
Speed-X Uplink 1
Speed-X Downlink 1
Expander Cascading Supported
Maximum Bus Segment Distance Up to 900m Under Supported Conditions
Zone Wiring 3EOL Supported
Alarm EOL Resistor 1kΩ
Tamper EOL Resistor 1kΩ
Fault EOL Resistor 2.2kΩ
Alarm Detection Supported
Tamper Detection Supported
Masking Detection Supported with Compatible Detectors
Fault Detection Supported
Short-Circuit Detection Supported
Front Tamper Protection Supported
Rear Tamper Protection Supported
Module Power Supply DC Supply; Verify Hardware Revision (Published Documents Differ)
Typical Operating Voltage 12V DC
Maximum Current Consumption 119mA at 12V DC
Quiescent Current 45mA at 12V DC
Auxiliary Power Outputs 1
Auxiliary Output Voltage 9–12V DC in Published Regional Datasheet; Verify Revision
Maximum Auxiliary Output Current 500mA
Power LED 1
Fault LED 1
Operating Temperature -10°C to +40°C
Operating Humidity 10% to 90%
Housing Material Plastic
Dimensions (W × H × D) 110 × 155 × 32mm (Regional Datasheet)
Weight 252.5g
Installation Environment Indoor
Installation Professional Wired Alarm Installation
Australian Warranty 2 Years, Subject to Applicable Terms

Detailed Features & Benefits

Eight Additional Wired Alarm Zones

The Hikvision DS-PM1-I8O2-H provides eight onboard wired alarm inputs for compatible AX HYBRID PRO control panels.

These additional zones allow professional installers to connect suitable wired intrusion detectors and expand security coverage throughout a property.

The available total zone capacity depends on the compatible alarm control panel and its supported expansion limits.

Two Collector Outputs

The module includes two onboard collector outputs designed to provide control signals for compatible external relay modules.

These outputs can support additional alarm-controlled functions when connected to appropriate interface equipment.

Important: Collector outputs are not equivalent to integrated high-current relay contacts. Do not connect electrical loads directly without confirming the required interface and output ratings.

Hikvision Speed-X Bus Communication

The DS-PM1-I8O2-H communicates with compatible AX HYBRID PRO control panels through Hikvision Speed-X bus technology.

This provides a dedicated wired communication connection for supported alarm zone and output functions.

Speed-X Expander Cascading

The module features two Speed-X bus connections.

One connection is used for communication with the compatible control panel or upstream bus device.

The second connection allows an additional compatible expander to be connected in a supported cascading arrangement.

This provides installation flexibility for larger properties requiring multiple wired detection zones.

Long-Distance Bus Communication

The manufacturer specifies a maximum communication distance of up to 900 metres between the control panel and expander under supported installation conditions.

Additional compatible cascading connections may provide further supported cable segments.

Actual installation limits depend on cable characteristics, system configuration, power distribution and manufacturer requirements.

Triple End-of-Line Wiring Support

The DS-PM1-I8O2-H supports 3EOL wiring configurations.

This allows compatible alarm systems to distinguish between different detector and wiring conditions.

The manufacturer's specified resistor values are 1kΩ for alarm, 1kΩ for tamper and 2.2kΩ for fault.

Alarm Condition Detection

The module supports alarm condition detection from suitable connected wired detectors.

When a configured detector activates, the corresponding zone information can be communicated to the compatible alarm control panel.

Tamper Condition Detection

The DS-PM1-I8O2-H supports tamper detection through compatible wired zone configurations.

This helps identify interference with connected alarm detectors or their wiring.

Masking Detection

The module supports masking condition detection where compatible detectors provide the required signalling.

This can help identify attempts to obstruct suitable anti-masking intrusion detectors.

Fault Detection

The expander supports fault detection through suitable zone wiring and detector configurations.

This assists with identifying abnormal conditions in connected wired alarm devices.

Short-Circuit Detection

The module supports detection of short-circuit conditions in compatible wired zone configurations.

Correct End-of-Line wiring and system configuration are required for reliable operation.

500mA Auxiliary Detector Power Output

The DS-PM1-I8O2-H includes one auxiliary power output for suitable wired detectors.

The manufacturer specifies a maximum auxiliary output current of 500mA.

Professional installers must verify the voltage requirements and total power consumption of connected devices.

Front and Rear Tamper Protection

The module supports front and rear tamper protection.

This helps compatible alarm systems detect interference with the expander enclosure or mounting arrangement.

Power and Fault LED Indicators

The DS-PM1-I8O2-H includes dedicated power and fault LED indicators.

These assist professional installers during system commissioning, maintenance and troubleshooting.

Low Quiescent Current

The manufacturer specifies a quiescent current of approximately 45mA at 12V DC.

Maximum module current consumption is specified as 119mA at 12V DC.

Power supply design must also account for any connected detectors and auxiliary equipment.

Compact Plastic Enclosure

The module features a compact plastic enclosure measuring approximately 110 × 155 × 32mm in the regional datasheet.

Its compact construction is suitable for protected indoor security equipment installations.

Residential Alarm Expansion

The DS-PM1-I8O2-H is suitable for compatible residential AX HYBRID PRO systems requiring additional wired alarm zones.

Applications may include larger homes, multi-level properties and installations requiring additional wired intrusion detectors.

Commercial Alarm Expansion

The module is also suitable for compatible commercial security installations.

Typical applications include offices, retail stores, warehouses and other premises requiring expanded wired alarm detection.

2-Year Australian Warranty

The Hikvision DS-PM1-I8O2-H supplied by Civic Electronic includes a 2-year Australian warranty, subject to applicable warranty terms.

Ideal Applications

  • AX HYBRID PRO Alarm Systems: Additional wired detection zones for compatible panels.
  • Residential Homes: Expanding wired intrusion detection coverage.
  • Large Houses: Additional wired zones for multiple rooms and areas.
  • Commercial Offices: Expanded wired alarm detection.
  • Retail Stores: Additional wired detector connections.
  • Warehouses: Expansion of supported perimeter and internal alarm zones.
  • Hotels: Compatible wired intrusion alarm expansion.
  • Multi-Area Installations: Additional wired detection points throughout a property.
  • Alarm System Upgrades: Expanding compatible existing AX HYBRID PRO installations.
  • Professional Security Installers: Wired alarm system expansion projects.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PM1-I8O2-H.

Product Type: Speed-X wired input expander.

Compatible Platform: Selected Hikvision AX HYBRID PRO control panels.

Wired Alarm Inputs: Eight.

Collector Outputs: Two.

Communication: Speed-X bus.

Bus Connections: One uplink and one downlink.

Zone Wiring: 3EOL supported.

Auxiliary Output: One detector power output, maximum 500mA.

Typical Supply Voltage: 12V DC; confirm the approved range for the supplied hardware revision.

Tamper Protection: Front and rear.

Installation Environment: Indoor.

Professional Installation: Recommended.

Recommended Installation Procedure

  • Confirm compatibility with the exact Hikvision AX HYBRID PRO control panel.
  • Verify the control panel firmware supports the DS-PM1-I8O2-H.
  • Confirm sufficient remaining wired zone expansion capacity.
  • Review the official Hikvision installation manual and datasheet.
  • Check the approved supply-voltage range for the specific hardware revision.
  • Determine the required wired detection zones.
  • Confirm compatibility with the selected wired alarm detectors.
  • Plan the required Speed-X bus wiring.
  • Verify cable length, cable type and bus topology against manufacturer requirements.
  • Calculate module and connected detector power consumption.
  • Confirm that connected auxiliary equipment remains within the 500mA output limit.
  • Select a suitable protected indoor mounting location.
  • Isolate the relevant alarm system power supplies before installation.
  • Mount the expander according to the manufacturer's instructions.
  • Connect the Speed-X uplink to the compatible control panel or upstream device.
  • Connect additional compatible expanders through the downlink where supported.
  • Connect the required DC power supply according to the manufacturer's wiring diagram.
  • Connect suitable wired detectors to the eight alarm zone inputs.
  • Install the correct End-of-Line resistors for the selected zone configuration.
  • Use the manufacturer's specified 3EOL resistor values where applicable.
  • Connect compatible external relay interfaces to the collector outputs if required.
  • Verify all wiring and polarity before restoring power.
  • Configure the expander address according to the manufacturer's instructions.
  • Restore power to the alarm system.
  • Confirm the module's power and fault indicators.
  • Register or configure the expander through the compatible control panel.
  • Assign the required zone types and functions.
  • Test each connected wired detector.
  • Verify alarm, tamper and fault reporting.
  • Test masking and short-circuit detection where supported.
  • Verify front and rear enclosure tamper functions.
  • Test the collector outputs with suitable interface equipment where used.
  • Confirm stable Speed-X communication.
  • Complete final system commissioning.

Important: The DS-PM1-I8O2-H is designed for compatible AX HYBRID PRO alarm systems. It is not a standalone alarm control panel.

Output Notice: The two collector outputs are intended for compatible relay control interfaces and must not be treated as high-current switching relays.

Power Supply Notice: Published Hikvision documentation contains differing supply-voltage specifications. Always follow the installation manual and electrical specifications applicable to the exact hardware revision supplied.

Package Contents

  • 1 × Hikvision DS-PM1-I8O2-H AX HYBRID PRO Wired Input Expander

Package Contents Notice: This listing is for the wired input expander only. The alarm control panel, wired detectors, external relay modules, power supply and cabling are not included unless separately specified. Confirm any mounting accessories against the manufacturer's packaging.

Frequently Asked Questions

What is the Hikvision DS-PM1-I8O2-H?

It is a wired input expander designed to add eight alarm zones and two collector outputs to compatible Hikvision AX HYBRID PRO systems.

What does a wired input expander do?

It increases the number of wired alarm detectors that can be connected to a compatible alarm control panel.

How many wired zones does the DS-PM1-I8O2-H provide?

Eight onboard wired alarm zones.

How many outputs does the module provide?

Two collector outputs for compatible external relay control interfaces.

Are the two outputs high-current relays?

No. They are collector outputs, not integrated high-current relay contacts.

Is the DS-PM1-I8O2-H compatible with AX HYBRID PRO?

Yes. It is designed for compatible Hikvision AX HYBRID PRO control panels.

Does it work with every AX HYBRID PRO panel?

Compatibility depends on the exact control panel model, firmware and available expansion capacity.

Does the module use Speed-X?

Yes. It communicates through Hikvision Speed-X bus technology.

How many Speed-X connections are included?

Two: one uplink and one downlink.

Can multiple expanders be connected together?

Yes. Supported cascading arrangements allow additional compatible expanders to be connected.

What is the maximum Speed-X communication distance?

Hikvision specifies up to 900 metres per supported communication segment, subject to installation requirements.

Does the module support 3EOL wiring?

Yes. Triple End-of-Line wiring is supported.

What resistors are used for 3EOL wiring?

The manufacturer specifies 1kΩ for alarm, 1kΩ for tamper and 2.2kΩ for fault.

Can the module detect alarm conditions?

Yes. It supports alarm detection through compatible wired zone configurations.

Does it support tamper detection?

Yes. It supports tamper detection through suitable zone wiring and enclosure protection.

Does it support anti-masking detectors?

Yes, where compatible detectors provide the required masking status signals.

Can the module detect wiring faults?

Yes. Supported configurations can identify fault and short-circuit conditions.

Does it provide power for wired detectors?

Yes. It includes one auxiliary detector power output rated at a maximum of 500mA.

Can I connect multiple detectors to the auxiliary power output?

Yes, where the connected devices are compatible and their combined power consumption remains within the specified output limit.

What power supply does the module require?

It requires a suitable DC supply. The typical voltage is 12V DC, but the approved operating range must be confirmed for the supplied hardware revision.

What is the maximum current consumption?

The manufacturer specifies 119mA at 12V DC.

What is the quiescent current?

Approximately 45mA at 12V DC.

Does the expander have enclosure tamper protection?

Yes. Front and rear tamper protection are supported.

Does it include LED indicators?

Yes. It includes power and fault indicators.

Can the module operate without an alarm control panel?

No. Its intended zone expansion functions require a compatible AX HYBRID PRO alarm control panel.

Can I connect wired PIR detectors?

Yes. Compatible wired PIR detectors can be connected using suitable zone wiring and power arrangements.

Can I connect magnetic door contacts?

Yes. Suitable wired magnetic contacts can be connected to compatible alarm zone inputs.

Can I connect wired glass-break detectors?

Yes. Compatible wired glass-break detectors may be connected using appropriate zone wiring and power arrangements.

Can I connect multiple types of wired detectors?

Yes. The expander supports suitable wired detector types, subject to electrical compatibility and zone configuration.

Can it be installed in an existing AX HYBRID PRO system?

Yes, where the control panel supports the module and has sufficient remaining expansion capacity.

Can the module be installed outdoors?

It is designed for suitable protected indoor installations.

What are the dimensions?

Approximately 110 × 155 × 32mm according to the regional datasheet.

How much does it weigh?

Approximately 252.5g.

What is the operating temperature range?

-10°C to +40°C.

What is the operating humidity range?

10% to 90% relative humidity.

Does it include an alarm control panel?

No. The alarm control panel is sold separately.

Does it include wired detectors?

No. Wired alarm detectors must be purchased separately.

Does the module provide alarm monitoring?

No. It provides wired alarm zone expansion. Professional alarm monitoring is a separate service.

Is professional installation recommended?

Yes. Professional installation is recommended to ensure correct Speed-X wiring, zone configuration, power supply sizing and alarm testing.

What warranty applies to the DS-PM1-I8O2-H?

The product includes a 2-year Australian warranty through Civic Electronic, subject to applicable terms.

Where can I buy the Hikvision DS-PM1-I8O2-H in Australia?

Civic Electronic supplies genuine Australian Hikvision alarm equipment and accessories with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including intrusion alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • 2-Year Australian Warranty: Warranty support for eligible Hikvision alarm equipment.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance with compatible Hikvision equipment selection.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX HYBRID PRO alarm systems, wired input expanders and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PM1-I8O2-H manufacturer datasheet for wired alarm inputs, collector outputs, Speed-X communication, 3EOL wiring, electrical requirements, dimensions and installation considerations.

Download Official Hikvision DS-PM1-I8O2-H Datasheet (PDF)

View Official Hikvision AX HYBRID PRO Device Compatibility List

Important: The DS-PM1-I8O2-H provides eight wired alarm inputs and two collector outputs. The collector outputs are intended for compatible external relay interfaces and are not high-current relay contacts. Confirm panel compatibility, firmware, bus wiring, power supply requirements and the correct 3EOL configuration before installation. Published documentation may vary by hardware revision.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch