Skip to content
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842
🔥 6% OFF Orders $1,400+ — Automatically Applied at Checkout | ✓ Genuine AU Stock & Warranty | ⚡ 2-Hour Pickup | 📞 1300 024 842

Hikvision DS-PR1-WB AX PRO Wireless Repeater – 433MHz Alarm Signal Range Extender

Save 8% Save 8%
Original price $148.00
Original price $148.00 - Original price $148.00
Original price $148.00
Current price $136.00
$136.00 - $136.00
Current price $136.00
Availability:
in stock, ready to be shipped

 

 

 

Hikvision DS-PR1-WB AX PRO Wireless Repeater – 433MHz Alarm Signal Range Extender

The Hikvision DS-PR1-WB AX PRO Wireless Repeater is a professional wireless signal extension device designed to increase communication coverage in compatible Hikvision AX PRO intrusion alarm systems.

Operating on the 433MHz wireless frequency, the DS-PR1-WB provides an additional communication path between supported AX PRO wireless devices and the connected alarm control panel.

It is particularly useful in larger residential properties, multi-storey buildings, warehouses, commercial offices and other locations where direct wireless communication may be affected by distance or building construction.

The repeater helps extend the effective wireless coverage of compatible detectors and peripherals, allowing professional installers to position supported devices in locations that may otherwise experience unreliable direct communication with the AX PRO control panel.

The DS-PR1-WB supports both Hikvision Tri-X and Cam-X wireless communication protocols, providing compatibility with supported AX PRO intrusion detectors and compatible PIR camera devices.

Its two-way wireless communication supports the exchange of alarm information and relevant device status data between compatible wireless equipment and the alarm system.

Advanced AES-128 encryption helps protect wireless communication against unauthorised interception.

The DS-PR1-WB operates using 2GFSK wireless modulation and provides a manufacturer-specified maximum RF transmission distance of 800 metres in unobstructed open-space conditions.

Actual wireless coverage depends on the installation environment, including walls, concrete structures, metal surfaces, electrical equipment and radio interference.

The repeater supports automatic pairing with up to eight compatible PIR camera or smoke detector devices, helping simplify supported system expansion and wireless device management.

Automatic pairing capability is subject to the connected control panel, device models, firmware and manufacturer compatibility requirements.

Unlike ordinary battery-powered wireless detectors, the DS-PR1-WB is designed for continuous operation using an external mains power connection.

The repeater supports a 100–240V AC power supply and incorporates a built-in rechargeable lithium backup battery.

In the event of mains power failure, the internal battery can maintain repeater operation for up to 35 hours under manufacturer-specified normal-temperature conditions.

Actual backup operating time depends on battery condition, environmental temperature, connected wireless activity and operating conditions.

The built-in backup battery helps maintain supported wireless communication during temporary mains power interruptions.

The DS-PR1-WB features three LED status indicators to assist professional installers with system commissioning and troubleshooting.

These indicators provide information about registration and wireless signal status, power status and fault conditions.

The repeater incorporates front and rear tamper protection, helping identify unauthorised opening or removal of the device.

A dedicated power switch provides convenient device power control during installation and servicing.

The DS-PR1-WB also includes manufacturer-designated serial interfaces for debugging and service operations.

Its compact wall-mounted design measures 150 × 150 × 25mm, making it suitable for installation in appropriate protected indoor locations.

The white plastic housing weighs approximately 372g and is designed to integrate discreetly into residential and commercial security installations.

The repeater supports an operating temperature range of −10°C to +55°C.

Hikvision specifies that the built-in battery cannot be charged at temperatures below 10°C. The external power adapter must remain connected under these conditions.

For best wireless performance, professional installers should position the repeater where reliable communication can be maintained with both the AX PRO control panel and the supported wireless devices requiring extended coverage.

The repeater is particularly valuable for installations where additional wireless communication coverage is required without replacing the existing compatible AX PRO alarm system.

Depending on the AX PRO control panel, multiple compatible repeaters may be supported within a single installation.

For example, the Hikvision DS-PWA96-M-WB series supports up to four wireless repeaters, subject to the relevant control panel specifications and firmware.

Supplied by Civic Electronic, an Authorised Hikvision Sales Partner and Hikvision Training Centre in Sydney, Australia.

Important: The DS-PR1-WB is a wireless alarm repeater, not a standalone alarm control panel, Wi-Fi extender or general-purpose network repeater. It requires a compatible Hikvision AX PRO 433MHz alarm system. Wireless device compatibility and repeater capacity must be confirmed before installation.

Hikvision DS-PR1-WB AX PRO Wireless Repeater 2-Year Australian Warranty

2-Year Australian Warranty – Subject to applicable product warranty terms and Australian Consumer Law.

Key Features

  • AX PRO Wireless Repeater: Extends communication coverage for compatible Hikvision alarm devices.
  • 433MHz Wireless Frequency: Designed for supported AX PRO 433MHz alarm systems.
  • Tri-X Wireless Protocol: Supports compatible Hikvision wireless intrusion devices.
  • Cam-X Wireless Protocol: Supports compatible Hikvision PIR camera communication.
  • Two-Way Communication: Enables supported wireless commands and status information exchange.
  • AES-128 Encryption: Helps protect wireless alarm transmissions.
  • 2GFSK Modulation: Manufacturer-specified wireless communication method.
  • 800m Wireless Range: Maximum specified unobstructed open-space RF distance.
  • Automatic Device Pairing: Supports compatible device auto-pairing.
  • Up to 8 Compatible Devices: Automatic pairing for supported PIRCAM or smoke detectors.
  • Extended Alarm Coverage: Helps improve communication in larger installations.
  • Multi-Storey Applications: Suitable for challenging wireless coverage environments.
  • Mains Powered: Operates from a suitable 100–240V AC supply.
  • Built-In Lithium Battery: Rechargeable backup power for temporary mains interruptions.
  • Up to 35 Hours Backup: Manufacturer-specified battery backup under normal-temperature conditions.
  • Automatic Backup Operation: Helps maintain operation during mains power failure.
  • Front Tamper Protection: Helps identify unauthorised housing access.
  • Rear Tamper Protection: Helps identify removal from the mounting surface.
  • Registration / Signal LED: Green and red status indication.
  • Power LED: Green power status indication.
  • Fault LED: Amber fault status indication.
  • Dedicated Power Switch: Convenient power management during servicing.
  • Serial Debug Interfaces: Two manufacturer-designated service interfaces.
  • Wall-Mounted Design: Suitable for protected indoor installation.
  • Compact Housing: 150 × 150 × 25mm.
  • Lightweight Construction: Approximately 372g.
  • Professional System Expansion: Suitable for compatible AX PRO wireless installations.

Technical Specifications

Brand Hikvision
Model DS-PR1-WB
Series AX PRO
Product Type Wireless Alarm Repeater
Primary Function Wireless Alarm Communication Extension
Wireless Frequency 433MHz
Supported Wireless Protocols Hikvision Tri-X / Cam-X
Wireless Communication Two-Way RF
RF Modulation 2GFSK
Wireless Encryption AES-128
Maximum RF Distance 800m (Open Space)
Automatic Pairing Supported
Compatible PIRCAM / Smoke Detector Auto-Pairing Up to 8 Supported Devices
Mains Power Supply 100–240V AC
Backup Battery Built-In Rechargeable Lithium Battery
Battery Backup Duration Up to 35 Hours at Normal Temperature
Battery Charging Limitation Cannot Charge Below 10°C
Front Tamper Protection Supported
Rear Tamper Protection Supported
Status LEDs 3
Registration / Signal LED Green / Red
Power LED Green
Fault LED Amber
Power Switch 1
Serial Debug Interfaces 2
Operating Temperature −10°C to +55°C
Operating Humidity 10–90% RH
Installation Method Wall Mounting
Installation Environment Protected Indoor Location
Housing Material Plastic
Housing Colour White
Dimensions (W × H × D) 150 × 150 × 25mm
Weight 372g
Compatible Systems Supported Hikvision AX PRO 433MHz Control Panels

Detailed Features & Benefits

Extended AX PRO Wireless Coverage

The DS-PR1-WB extends communication coverage between compatible Hikvision AX PRO wireless devices and their connected alarm control panel.

Suitable for Larger Properties

The repeater is useful in larger homes, warehouses, commercial premises and other installations where direct wireless communication may be limited.

433MHz Wireless Communication

The DS-PR1-WB operates at 433MHz and is designed for compatible AX PRO wireless alarm systems using the same frequency.

Hikvision Tri-X Wireless Protocol

Tri-X communication supports compatible wireless intrusion detectors and alarm peripherals.

Hikvision Cam-X Wireless Protocol

Cam-X communication supports compatible Hikvision PIR camera devices used for alarm verification.

Two-Way Wireless Communication

Two-way RF communication supports the exchange of alarm events and relevant device status information.

AES-128 Wireless Encryption

AES-128 encryption helps protect communication between the repeater and compatible AX PRO equipment.

800m Open-Space Wireless Range

Hikvision specifies a maximum RF transmission distance of 800 metres under unobstructed open-space conditions.

Automatic Pairing Support

Automatic pairing helps simplify the connection of supported wireless devices during professional commissioning.

Support for Up to Eight Compatible Devices

The repeater supports automatic pairing with up to eight compatible PIR camera or smoke detector devices, subject to system compatibility.

100–240V AC Mains Power

The repeater operates using a suitable mains power connection for continuous operation.

Built-In Rechargeable Lithium Battery

An internal rechargeable lithium battery provides backup operation during temporary mains power interruptions.

Up to 35 Hours Battery Backup

Hikvision specifies up to 35 hours of backup operation under normal-temperature conditions.

Backup Operation During Power Failure

The built-in battery helps maintain supported wireless communication if the mains power supply is interrupted.

Front Tamper Protection

Front tamper protection helps identify unauthorised opening of the repeater housing.

Rear Tamper Protection

Rear tamper protection helps identify removal of the repeater from its mounting surface.

Three LED Status Indicators

The integrated LEDs provide visual feedback for registration, wireless signal, power and fault conditions.

Registration and Wireless Signal Indicator

The green/red indicator assists installers with device registration and wireless communication checks.

Power Status Indicator

The green power LED provides convenient visual confirmation of the device power state.

Fault Status Indicator

The amber fault LED provides visual indication of supported fault conditions.

Dedicated Power Switch

A built-in power switch assists with installation, maintenance and controlled device shutdown.

Compact Wall-Mounted Housing

The repeater measures 150 × 150 × 25mm, providing a compact solution for suitable protected indoor installation locations.

Professional Wireless Network Planning

The repeater allows installers to improve coverage in suitable areas without replacing an existing compatible AX PRO control panel.

Ideal Applications

  • Large Residential Homes: Extend communication to compatible detectors positioned farther from the alarm panel.
  • Multi-Storey Properties: Improve supported wireless coverage between floors.
  • Commercial Offices: Extend communication across larger office environments.
  • Warehouses: Improve coverage for compatible wireless detectors in suitable storage and operational areas.
  • Retail Stores: Extend alarm device communication in larger premises.
  • Showrooms: Support compatible wireless devices across extended floor areas.
  • Workshops: Improve alarm communication where suitable coverage is available.
  • Detached Buildings: Support compatible devices where reliable wireless communication can be established.
  • Residential Alarm Expansions: Extend compatible AX PRO wireless installations.
  • Commercial Security Upgrades: Improve supported alarm system wireless coverage.
  • PIR Camera Installations: Support compatible Hikvision Cam-X wireless devices.
  • Professional Security Installations: Suitable for trained security technicians and system integrators.

Compatibility & Installation

Manufacturer: Hikvision.

Model: DS-PR1-WB.

Series: AX PRO.

Product Type: Wireless Alarm Repeater.

Wireless Frequency: 433MHz.

Wireless Protocols: Hikvision Tri-X and Cam-X.

Maximum Wireless Range: 800m in unobstructed open space.

Power Supply: 100–240V AC.

Backup Battery: Built-in rechargeable lithium battery.

Backup Duration: Up to 35 hours under specified conditions.

Mounting: Wall mounted.

Compatible Systems: Supported Hikvision AX PRO 433MHz control panels.

Recommended Installation Procedure

  • Confirm the exact DS-PR1-WB model and hardware revision.
  • Verify compatibility with the intended Hikvision AX PRO control panel.
  • Confirm the alarm panel operates on the compatible 433MHz wireless frequency.
  • Check the control panel's maximum supported repeater capacity.
  • Confirm compatibility with the wireless detectors requiring extended coverage.
  • Review the official Hikvision repeater installation instructions.
  • Identify the areas experiencing weak or unreliable wireless communication.
  • Review existing wireless signal strength information.
  • Identify the wireless devices requiring repeater support.
  • Select a suitable location between the alarm panel and supported wireless devices.
  • Confirm reliable communication between the repeater and the alarm control panel.
  • Confirm the repeater can communicate with the intended wireless devices.
  • Avoid positioning the repeater inside metal cabinets.
  • Avoid locations surrounded by large metal structures.
  • Consider reinforced concrete walls and other RF obstacles.
  • Avoid unnecessary proximity to electrical interference sources.
  • Select a protected indoor installation location.
  • Confirm a suitable mains power connection is available.
  • Ensure the power connection complies with applicable Australian electrical safety requirements.
  • Mount the repeater securely according to Hikvision's installation instructions.
  • Confirm the rear tamper mechanism operates correctly.
  • Connect the approved power supply according to the manufacturer's instructions.
  • Switch on the repeater.
  • Check the power LED indication.
  • Enrol the repeater into the compatible AX PRO alarm system.
  • Confirm successful registration.
  • Check the wireless signal indicator.
  • Configure supported wireless devices to communicate through the repeater.
  • Use automatic pairing where supported.
  • Confirm the number of connected devices remains within supported limits.
  • Test communication with compatible PIR camera devices where installed.
  • Test communication with compatible smoke detectors where installed.
  • Verify communication with other supported wireless detectors.
  • Check alarm event reporting through the repeater.
  • Verify device status reporting where supported.
  • Test front tamper protection.
  • Test rear tamper protection.
  • Check the fault LED indication.
  • Verify mains power status.
  • Test backup operation using the manufacturer's recommended procedure.
  • Confirm the repeater remains operational during the controlled power interruption.
  • Restore mains power.
  • Confirm normal operation resumes.
  • Check supported battery status information.
  • Verify reliable communication at the intended device locations.
  • Record the repeater's installation position and connected devices.
  • Complete professional commissioning and user handover.

Wireless Compatibility Notice: The DS-PR1-WB operates at 433MHz. Compatibility with 868MHz-only AX PRO systems must not be assumed.

Wireless Range Notice: The specified 800m transmission distance applies to unobstructed open-space conditions. Actual operating range may be significantly shorter inside buildings.

Device Compatibility Notice: The repeater does not necessarily support every AX PRO wireless device. Confirm compatibility with the intended detectors, control panel and firmware before installation.

Automatic Pairing Notice: The manufacturer's stated automatic pairing capability for up to eight devices applies to supported PIRCAM or smoke detector models.

Power Supply Notice: The DS-PR1-WB requires a suitable 100–240V AC mains power connection. The internal battery is intended for backup operation rather than permanent standalone use.

Battery Backup Notice: Up to 35 hours of backup operation is specified under normal-temperature conditions. Actual backup duration may be shorter.

Low Temperature Notice: The original DS-PR1-WB battery cannot be charged below 10°C. Ensure the external power adapter remains connected under these conditions.

Installation Notice: The repeater is designed for protected indoor installation and must not be exposed directly to outdoor weather.

Electrical Safety Notice: Any fixed mains electrical installation work must be performed by an appropriately licensed electrician.

Professional Installation Notice: Installation and commissioning by a suitably qualified security technician are recommended to ensure correct repeater placement and reliable wireless communication.

Package Contents

  • 1 × Hikvision DS-PR1-WB AX PRO Wireless Repeater
  • Built-In Rechargeable Lithium Backup Battery – Integrated into the repeater.

Package Contents Notice: Confirm the supplied power adapter, power lead, mounting accessories and printed documentation against the manufacturer's packaging. A compatible Hikvision AX PRO alarm control panel is sold separately unless expressly included in a bundle.

Frequently Asked Questions

What is the Hikvision DS-PR1-WB?

It is a wireless repeater designed to extend communication coverage for compatible Hikvision AX PRO alarm systems.

What does a wireless alarm repeater do?

It provides an additional communication path between supported wireless alarm devices and the connected control panel.

Why would I need a wireless repeater?

A repeater may be useful when compatible wireless detectors are too far from the control panel or experience unreliable direct wireless communication.

Does the DS-PR1-WB increase AX PRO wireless coverage?

Yes, when correctly positioned and used with compatible equipment.

Can it improve wireless communication in a large house?

Yes, where suitable wireless coverage can be established.

Can it improve communication between floors?

Yes, depending on building construction and repeater positioning.

Can it be used in warehouses?

Yes, in suitable protected indoor locations.

Can it be used in commercial offices?

Yes.

Can it extend communication to a detached building?

Potentially, where reliable wireless communication and suitable installation conditions can be achieved.

What wireless frequency does it use?

433MHz.

Does it support Hikvision Tri-X?

Yes.

Does it support Hikvision Cam-X?

Yes.

What is the difference between Tri-X and Cam-X?

Tri-X supports compatible wireless alarm communication, while Cam-X supports compatible Hikvision PIR camera communication functions.

Does it support two-way wireless communication?

Yes.

Does it support AES-128 encryption?

Yes.

What is the maximum wireless transmission range?

Up to 800 metres in unobstructed open-space conditions.

Will it achieve 800m range inside a building?

Not necessarily. Walls, metal structures and radio interference can reduce wireless range.

Does the repeater guarantee coverage throughout a building?

No. Wireless performance depends on the installation environment and correct repeater positioning.

Does it support automatic device pairing?

Yes.

How many devices can it automatically pair?

Hikvision specifies automatic pairing with up to eight compatible PIRCAM or smoke detector devices.

Can it extend communication to Hikvision PIR cameras?

Yes, for supported Hikvision PIR camera models.

Can it extend communication to smoke detectors?

Yes, for supported wireless smoke detector models.

Can it extend every Hikvision wireless detector?

Not necessarily. Confirm device compatibility before installation.

Can it connect to the Hikvision DS-PWA96-M-WB?

It is designed for compatible 433MHz AX PRO systems. Confirm panel firmware and supported device compatibility before installation.

How many repeaters can a DS-PWA96-M-WB support?

Hikvision specifies support for up to four wireless repeaters on compatible DS-PWA96-M-WB systems.

Can multiple repeaters be installed?

Yes, where supported by the connected AX PRO control panel.

Can it connect to an 868MHz-only AX PRO panel?

Compatibility should not be assumed because this repeater operates at 433MHz.

Can it operate without an AX PRO control panel?

No. Normal repeater operation requires a compatible AX PRO alarm system.

Does it extend Wi-Fi coverage?

No. It is not a Wi-Fi range extender.

Does it extend CCTV camera Wi-Fi signals?

No. It is designed for compatible AX PRO wireless alarm devices.

Does it connect directly to a router?

No router connection is required for its specified AX PRO wireless repeater function.

Does the repeater require mains power?

Yes.

What power supply does it use?

100–240V AC.

Does it have a built-in battery?

Yes, a rechargeable lithium backup battery.

How long does the backup battery last?

Up to 35 hours under manufacturer-specified normal-temperature conditions.

Will the repeater continue working during a power failure?

It can continue operating from its built-in battery while sufficient backup charge remains.

Does the battery recharge automatically?

The built-in battery is rechargeable through the supported power system, subject to the manufacturer's operating conditions.

Can the battery charge below 10°C?

No. Hikvision specifies that the original DS-PR1-WB battery cannot be charged below 10°C.

Can the repeater operate permanently using only its battery?

No. The battery is intended for temporary backup operation.

Does it have tamper protection?

Yes, front and rear tamper protection.

What does front tamper protection do?

It helps identify unauthorised opening of the repeater housing.

What does rear tamper protection do?

It helps identify removal from the mounting surface.

Does it have LED indicators?

Yes, three status LEDs.

What does the registration/signal LED indicate?

It provides information about device registration and wireless communication status.

What does the green power LED indicate?

It provides visual indication of the repeater's power status.

What does the amber fault LED indicate?

It indicates supported device fault conditions.

Does it have a power switch?

Yes.

Does it support wall mounting?

Yes.

Can it be installed inside a metal cabinet?

Metal enclosures may significantly reduce wireless performance and are generally unsuitable without a specifically approved installation design.

Can it be installed outdoors?

Outdoor suitability is not specified for this model. Use a suitable protected indoor location.

What is the operating temperature range?

−10°C to +55°C, subject to the separate battery charging limitation.

What is the operating humidity range?

10–90% relative humidity.

What are the dimensions?

150 × 150 × 25mm.

How much does it weigh?

Approximately 372g.

What colour is the repeater?

White.

What material is the housing?

Plastic.

Is the DS-PR1-WB the same as the DS-PR1-WB(B)?

No. They are different hardware revisions with different physical dimensions and battery backup specifications.

Does it detect motion?

No. It extends communication for compatible wireless alarm devices.

Does it contain a camera?

No.

Does it record video?

No.

Does it include a control panel?

No. A compatible AX PRO control panel must be purchased separately unless included in a bundle.

Does it include professional alarm monitoring?

No.

Does Civic Electronic provide alarm monitoring?

No. Civic Electronic supplies security equipment and technical support but no longer provides alarm monitoring services.

Does it require professional installation?

Professional installation is recommended to ensure correct wireless coverage, compatibility, power connection and system configuration.

Where can I buy the Hikvision DS-PR1-WB in Australia?

Civic Electronic supplies genuine Australian Hikvision security equipment with professional installer and trade support.

Why Buy from Civic Electronic?

Civic Electronic is an Australian professional security equipment wholesaler and an Authorised Hikvision Sales Partner and Hikvision Training Centre.

We specialise in genuine Australian Hikvision and HiLook security products, including wireless alarm systems, CCTV equipment, video intercoms, access control products and professional security accessories.

  • Authorised Hikvision Sales Partner: Genuine Australian Hikvision equipment.
  • Hikvision Training Centre: Professional product knowledge and installer training.
  • Australian Warranty Support: Warranty assistance for eligible Hikvision products.
  • Competitive Trade Pricing: Wholesale opportunities for eligible professional security installers.
  • Technical Support: Assistance selecting compatible Hikvision alarm equipment.
  • Professional Installer Support: Support for security technicians and system integrators.
  • Australia-Wide Delivery: Shipping available throughout Australia.
  • Free Standard Shipping: Available on eligible orders of $300 or more.
  • 2-Hour Click & Collect: Available from Rouse Hill, subject to stock confirmation.

For Hikvision AX PRO wireless repeaters, alarm control panels and professional installer support, contact Civic Electronic on 1300 024 842.

Official Hikvision Manufacturer Documentation

Review the official Hikvision DS-PR1-WB datasheet for wireless repeater specifications, compatible communication protocols, backup battery requirements and installation information.

Download Official Hikvision DS-PR1-WB Datasheet (PDF)

View Official Hikvision DS-PR1-WB Product Specifications (PDF)

Important: The Hikvision DS-PR1-WB is a 433MHz AX PRO wireless repeater supporting Tri-X and Cam-X communication, AES-128 encryption, two-way RF transmission and up to 800m open-space wireless range. It operates from 100–240V AC and includes a rechargeable lithium backup battery providing up to 35 hours of operation under specified conditions. Automatic pairing supports up to eight compatible PIRCAM or smoke detector devices. A compatible Hikvision AX PRO control panel is required.

Genuine Product Assurance, We are officially an authorized reseller of Hikvision

Hikvision, Dahua, TP-Link and Ruijie Products are covered by a 3 year manufacturer warranty, except all Access Controls, Intercoms, Alarms, and Display Monitors are 2 year warranty, Hard Drive and any spare parts 12-month warranty.

Our warranty does not include damage due to incorrect fitting of parts or accessories, setup applications or products integration.

1. Free and Express Shipping

  • Free Standard Shipping applies to all orders valued at $300 or more.
  • Express Shipping is available for an additional $65 per order.

Please note that Express Shipping is not available for all postcodes. Customers are advised to confirm eligibility through the Australia Post Coverage link below before selecting the express shipping option. As shipping fees are passed directly to couriers, we are unable to refund shipping costs for postcodes not covered by the express delivery network:

Australia Post Coverage

2. Order Processing

  • Orders placed before 8:00 AM (Sydney time) on a business day may packed and dispatched the same day base on stock availability.
  • Orders are processed Monday to Friday, excluding weekends and public holidays.
  • Tracking information will be provided via email after 11:00 AM on the day the order is shipped.

All orders are dispatched using the most efficient postage method available to ensure timely delivery.

3. Delivery Timeframes

  • Express Shipping: Next business day delivery within the Australia Post Express Post Network Or Priority Shipping by other couriers for non covered Australia Post Areas (capital cities and major metropolitan areas, including Perth CBD only).
  • Regional Areas Express/Priority Shipping: Delivery may take between 2 to 5 business days, depending on location and courier service coverage.
  • Standard Shipping: Please allow up to 10 business days from dispatch.

If you have not received your order within 5 business days (express) or 10 business days (standard) after receiving your shipment tracking details, please contact us with your full name and order number so we can investigate your delivery status.
In most cases, a delivery attempt has been made and the parcel is awaiting collection at your nearest depot or collection point. Please check your email spam or junk folder for any courier notification emails.

4. Delivery Requirements and Limitations

  • All deliveries require a signature upon receipt.
  • Parcels will not be left unattended or with a “safe drop” unless specifically authorised in writing by the customer before dispatch.
  • If no authorised person is available to sign for the parcel at the time of delivery, a delivery card will be left, and your parcel will be transferred to the nearest depot or collection point for pickup.
  • We do not deliver to PO Boxes. Orders must be addressed to a valid physical delivery address within Australia.

Delivery times are estimates only and may vary due to courier schedules, regional service limitations, or other unforeseen circumstances. Once an order has been dispatched from our warehouse, it becomes the responsibility of the courier or postal service.

We are not liable for delays, loss, or damage that occur during transit, as these are beyond our control.
Any claims for loss or damage during delivery must be raised directly with the relevant courier company.

If an incorrect, incomplete, or undeliverable address (including PO Boxes) is provided, the customer will be responsible for all additional shipping charges incurred to resend the order.

5. Tracking Your Order

Once your order has been dispatched, you will receive an email containing a tracking number.
Customers are responsible for monitoring their delivery progress and liaising with the courier directly for updates or redelivery arrangements.

To ensure secure delivery, a signature is required upon receipt. The courier will not leave the parcel unattended under any circumstances. If delivery cannot be completed, a collection notice will be issued.

6. Additional Information

We strive to ensure timely and accurate delivery of all orders; however, as we are not a courier company, we cannot guarantee delivery times and are unable to intervene in courier operations once a parcel has been dispatched.
By placing an order, customers acknowledge and accept the above terms regarding shipping, delivery, and courier responsibility.

Price Beat Guarantee

At Civic Electronic, we are committed to offering genuine products at the most competitive prices in Australia. If you find a lower advertised price from an authorised
Australian seller, we won't just match it, we'll beat it.

How It Works

If you find a cheaper price, simply:

  1. Provide a link to the competitor's advertised product
  2. Confirm the seller is an authorised Australian reseller
  3. Submit your request before placing your order

Our team will verify the details and respond promptly.

Eligibility Requirements

To qualify for our Price Beat Guarantee, the following conditions must be met:

  • The competitor must be an authorised Australian reseller
  • The seller must operate as a legitimate Australian retail business
  • The item must be identical (same brand, model number and specifications)
  • The product must be brand new and currently in stock
  • The price must be publicly advertised (not a private quote or member-only offer)
  • The advertised price must include GST
  • Shipping costs must be included in the total comparison
  • The competitor must supply Australian warranty support

Exclusions

Our Price Beat Guarantee does not apply to:

  • Dropshippers or intermediary sellers who do not physically stock the product
  • Sellers operating without a verifiable Australian retail presence
  • Businesses with no registered retail location or identifiable trading address
  • Marketplace sellers (eBay, Amazon, etc.) unless officially authorised
  • Grey imports or overseas-based sellers Clearance, liquidation or closing-down sales
  • Refurbished, used or open-box items
  • Pricing errors or misprints
  • Bundle deals, bonus offers or cashback promotions
  • Trade, bulk or special contract pricing

Important Conditions

  • Price Beat requests must be approved prior to purchase
  • Approved offers are valid for 24 hours only
  • Civic Electronic reserves the right to verify reseller authorisation status
  • We reserve the right to decline requests that do not meet the above criteria
  • This policy may be modified or withdrawn at any time without notice

Why Buy From Civic Electronic?

  • 100% Genuine Products
  • Authorised Australian Reseller
  • Local Australian Warranty
  • Real Stock, Not Dropshipped
  • Expert Technical Support
  • Fast & Secure Dispatch